• The Journal of Korea Robotics Society
• /
• v.13 no.1
• /
• pp.38-44
• /
• 2018

In this paper, we propose Intelligent Driver Assistance System (I-DAS) for driver safety. The proposed system recognizes safety and danger status by analyzing blind spots that the driver cannot see because of a large angle of head movement from the front. Most studies use image pre-processing such as face detection for collecting information about the driver's head movement. This not only increases the computational complexity of the system, but also decreases the accuracy of the recognition because the image processing system dose not use the entire image of the driver's upper body while seated on the driver's seat and when the head moves at a large angle from the front. The proposed system uses a convolutional neural network to replace the face detection system and uses the entire image of the driver's upper body. Therefore, high accuracy can be maintained even when the driver performs head movement at a large angle from the frontal gaze position without image pre-processing. Experimental result shows that the proposed system can accurately recognize the dangerous conditions in the blind zone during operation and performs with 95% accuracy of recognition for five drivers.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.23-31
• /
• 2011

In this paper, the intelligent smart monitor system is implemented for the next generation vehicle. to mitigate the numerous effects of distractions within the vehicle, it is vital to put critical information where the driver can use it without affection focus on the road ahead. Audible alarms are useful supplements when used in conjunction with visual displays. But driving is an overwhelmingly visual task. To optimize a vehicle's active safety systems, more than just audible alarms are necessary. The driver needs a visual interface that focuses his or her attention on the road ahead. The most commonly viewed information in a vehicle is from the instrument cluster, where speed, tachometer, fuel, engine temperature, fuel gauge, turn indicators and warning lights provide the driver with an array of fundamental information. TFT LCD, LCD Back light led, plane mirror, lens and controllers parts were designed to intelligent integrated smart monitor system. Finally, in this paper, we analyze intelligent integrated smart monitor system for driver safety vehicles.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.101-111
• /
• 1998

CNS (Car Navigation System) is the most compatible candidate among various in-vehicle information systems as a provider of ITS (Intelligence Transport Systems) information. It generally consists of remote controller, display, CD-changer, GPS receiver and so on. Among them, display is the most important and critical element of the HMI (Human-Machine Interface) suggesting the digital map to the driver. Therefore, it is certain that the display gives cognitive, physical, mental and visual workloads to the driver which are directly related with the driver's and road safety with the success of ITS. Until now, various human factors techniques have been developed and applied to estimate the driver's workload and to collect the driver's requirements of the CNS digital map, for example, mental workload assessment, visual activity analysis, cognitive analysis and so on. In addition to these kinds of techniques, this research performed the human sensibility ergonomics approach to directly investigate and evaluate the driver's requirements and sensibilities of the real products.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.87-94
• /
• 2009

Today's driver information system often features a rotary control type as a main controller for menu navigation. Population stereotype should be clearly understood in designing those systems to minimize the misunderstanding by the operator. This paper investigates stereotypes for rotary controlled menu interfaces and influences of contributing principles. A human factors experiment was conducted using various configurations of control-display layouts, cursor shapes/positions, and movement directions. The results showed that the control should be on the left of the display, with a rightward icon on the right side of the cursor, in order to match the stereotype. Regression analysis indicated that Warrick's principle was the most influential principle, followed by Icon shape, Icon position, Clockwise away, and Clockwise up principles. This study provides valuable information to designers of menu-based systems such as driver information systems and main control rooms that uses rotary controls.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.27-34
• /
• 2007

In this paper device driver for camera capture in hand held mobile system is implemented based on microsoft windows CE operating system. We also study the storage device driver based on the FAT fie system by using NAND flash memory as a storage device. We use the MBA2440 PDA board for implementing the hardware for image capture by using CMOS camera module producted by PixelPlus company. This camera module has VGA $640{\times}480$ pixel resolution. We also make application program which can be cooperated with the device driver for testing its performance, for example image capture speed and quality of captured image. We check that the application can be cooperated well not only with the device driver for camera capture but also with the device driver for FAT file system designed especially for the NAND flash memory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.6
• /
• pp.523-531
• /
• 2001

This paper describes and automatic mirror adjustment system that rotates a pair of side mirrors and the room mirror of a car to the optimal position for a driver by using the locating of the driver\`s pupils. A stereo vision system measures 3D coordinates of a pair pupils by analyzing the input images of stereo B/W CCD cameras mounted on the instrument panel. this system determines the position angle of each mir-ror on the basis of information about the location of the pupils and rotates each mirror to the appropriate po-sition by mirror actuators. The vision system can detect the driver\`s pupils regardless of whether it is day-time or nighttime by virtue of an infrared light source. information about the pair of nostrils in used to im- prove the correctness of pupil detection. This system can adjust side mirrors and the room mirror automati- cally and rapidly by a simple interface regardless of driver replacement of driver\`s posture. Experiment has shown this to be a new mirror adjustment system that can make up for the weak points of previous mirror adjustment systems.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.48-55
• /
• 2009

In order to keep safe driving conditions under road networks, there are several formations such as road structure, road surface condition, traffic occupancy and supplement of an accurate information of traffic status ahead To support safe-driving on each road formation, each formation is supplied with various information to help the driver. However, in some cases like rapid status change at local-scale geography, traffic information systems often displays insufficient information because of the lack of information correlation. In order to accurately aware the driver, all road formation must be in sync. It is important to supply accurate information to the driver because this information directly impacts the drivers on the road. This paper discusses the amber information to keep the least safety driving over road formations including tunnels and bridges. This paper also will propose the informations for safe-driving conditions, information linkage on the road and rule-base safety information, as ITS technology, being displayed for all drivers under the worst weather conditions.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.2
• /
• pp.57-67
• /
• 2009

This study proposed a practical metaphor development process that consisted of three steps: 1) identifying major functions, 2) developing metaphor candidates, and 3) evaluating appropriateness of the candidates. In the first step, a total of 27 functions might be implemented in a driver information system (DIS) in the near future. Then, three metaphor candidates were selected from existing metaphors, which were reported to be more practical than others by previous studies. Finally, the candidates were evaluated on their appropriateness for driver information systems by using a quick and simple survey. As a result, two metaphors (a PC and a secretary) were identified as the most appropriate ones. The two metaphors can be used to design a variety of interfaces and interactions for driver information systems. In addition, the development process proposed in this study could be applied to developing metaphors for emerging devices with a variety of functions (e.g. PMPs, MP3s, and electronic dictionaries) as well as driver information systems.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.167-176
• /
• 2009

In this paper, a system that detects driver's drowsiness has been implemented based on the automatic extraction and the tracking of pupils. The research also focuses on the compensation of illumination and reduction of background noises that naturally exist in the driving condition. The system, that is based on the principle of Haar-like feature, automatically collects data from areas of driver's face and eyes among the complex background. Then, it makes decision of driver's drowsiness by using recognition of characteristics of pupils area, detection of pupils, and their movements. The implemented system has been evaluated and verified the practical uses for the prevention of driver's drowsiness.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.632-639
• /
• 2014

In this paper, we propose a PC's self-monitoring system for protecting illegal outflow of important personal files, which are managed in the Windows environment PC. This paper is based on the idea that it should be a read (access) file operation in order to outflow files through the network. To compare the information (name, some content) obtained from all operations of the reading of the 'Windows File System Driver' and captured transmission packets of mini port of 'Windows NDIS (Network Driver Interface Specification) Driver', and, if two pieces of information match, this system will determine the transmission to user. In this paper, tentatively, we developed a function to gather file information about file read operation and developed a function for transmission packet capture. This demonstration implementation showed that the proposed process has validity and the proposed process verified that it does not significantly affect the PC's performance.