• Journal of Biomedical Engineering Research
• /
• v.20 no.3
• /
• pp.323-329
• /
• 1999

This paper proposed a method for the cancellation of the moving artifact which was produced during the detection of drowsiness usmg electrodermal activity signal. Two types of wrist electrode were developed to overcome the defect of the steering wheel type electrode which couldn't eliminate the moving artifacts due to driver's movements. Wrist type electrode II which has been modified from electrode type I was most effective for eliminating movmg artifacts compared to wheel type electrode and wrisL type electrode 1. The decIsion criteria(if IRI$\leq$10 and 1.1$\leq$dNz) for detecting moving artifact was determined from the virtual driving experiments. An algorithm which substituted past value of Nz for the current value of Nz whenever an EDA signal satisfied the criteria was developed. The experimental resulls of virtual driving and road test showed that the proposed algorithm had been successfully removed the most of the error due to the moving artifact Therefore, the developed system which use electrode type II and the algorithm might be less influenced by moving artifacts and could measure an accurate arousal state.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.31-40
• /
• 2012

This paper proposes a visual landmark, and presents a parking assistance system using the landmarks. The visual landmark is a feature corresponding to the parking slots, it must be selected considering the parking lot's environment. The parking lot has simple repetitive pattern environment without noticeable features. The previous landmarks are not proper to the parking lot's environment. We propose the visual landmark for this environment. We estimate the vehicle's location using the proposed landmarks, and expect the vehicle's trajectory according to the vehicle's state. The system's inputs are images from the camera fixed to the vehicle. The presented system estimates the vehicle's location using the input images, and assists a driver through displaying the expected vehicle's trajectory from the steering angle. The experimental results showed the proposed landmark's performance and the parking assistance system's performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.127-130
• /
• 2017

The information and communication technology that is being developed recently has been greatly influencing the automobile market. In recent years, devices equipped with IT technology have been installed for the safety and convenience of the driver. It is necessary to develop a system that can link the Smartphone with the vehicle in accordance with these changes. In this paper, first of all we analyze the car connectivity services that served by the other competitors. In addition, we proposed and implemented the improved system that can support and control most of smart device application in vehicle by user's NEEDS. We also implemented the application that can restrict the applications which unsatisfied the drive regulations and designed and proposed the scenario that can apply our company's car connectivity system in future.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1567-1572
• /
• 2012

An IPC(instrument panel Cluster) is a useful device that provides driving information to the driver. The information includes the vehicle speed, RPM, mileage, etc. The traditional IPC has been mostly implemented with mechanical technique. According to increment of needs for the convenience of IPC by user, the IPC must provide graphical interface and efficient driving information. Also the user-friendly IPC is needed by drivers. Thus flexible and robust software structure and development methods are required in order to develop IPC. In this paper, we propose software architecture and design method for the IPC using modeling method. We use MVC model and UML to model software architecture because they have flexible and robust characteristics. We can develop the various forms of information screen by separating views from model by using state diagram and class diagram in UML. Through this, the cost saving and ease of maintenance can be expected. The development time and cost can be reduced by using proposed method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1321-1326
• /
• 2012

An IPC(instrument panel Cluster) is a useful device that provides driving information to the driver. The information includes the vehicle speed, RPM, mileage, etc. The traditional IPC has been mostly implemented with mechanical technique. According to increment of needs for the convenience of IPC by user, the IPC must provide graphical interface and efficient driving information. Also the user-friendly IPC is needed by drivers. Thus flexible and robust software structure and development methods are required in order to develop IPC. In this paper, we propose software architecture and design method for the IPC using modeling method. We use MVC model and UML to model software architecture because they have flexible and robust characteristics. We can develop the various forms of information screen by separating views from model by using state diagram and class diagram in UML. Through this, the cost saving and ease of maintenance can be expected. The development time and cost can be reduced by using proposed method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.4
• /
• pp.251-265
• /
• 2001

As the device scaling proceeds, the operating voltage(VDD) of giga-bit DRAMs is expected to be reduced to 1.5V or down, fir improving the device reliability and reducing the power dissipation. Therefore the low-voltage circuit design techniques are required to implement giga-bit DRAMs. In this work, state-of-art low-voltage DRAM circuit techniques are reviewed, and four kinds of low-voltage circuit design techniques are newly proposed for giga-bit DRAMs. Measurement results of test chips and SPICE simulation results are presented for the newly proposed circuit design techniques, which include a hierarchical negative-voltage word-line driver with reduced subthreshold leakage current, a two-phase VBB(Back-Bias Voltage) generator, a two-phase VPP(Boosted Voltage) generator and a bandgap reference voltage generator.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.203-210
• /
• 2019

Most cars today use electronic control to control the state of the engine to achieve optimum performance. This study developed a device for maintaining fault diagnosis and optimal vehicle status by displaying the engine information of a car on the screen in real time using can communication. This system displays information generated from the engine to the driver in real time such as engine intake and exhaust temperature, current battery voltage, tire pressure, RPM, DPF collection amount, torque, and horsepower through the OBD2 socket. You can check immediately. It can help you to drive safely by measuring tire pressure and displaying it on the screen, and it provides a mode to set the shift timing to suit your taste. In particular, in the case of diesel engine cars, the problems caused by smoke can adversely affect the performance and environmental pollution. Therefore, the system was developed to display the DPF collection amount on the system screen to prevent environmental pollution and to manage the vehicle efficiently.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.97-100
• /
• 2010

Lately, becausing Life, property loss from car accident, vehicles have been used vehicle blackbox like blackbox by airplane. when the accident happened, existing car blackbox that was stored external image or video of vehicle don't know the vehicle's driving conditions. For knowing vehicle's driving conditions, vehicle is loaded sensors for Variety of measurement and control. the sensors is controlled by ECU(Electronic Control Unit) and all vehicles is used Mandatory OBD2(On-board diagnostics) protocol for communication between ECUs since 2006. Using ODB2 protocol, driver use blackbox data by various driving data to occur vehicle' ECU and can be obtained more definitive information. In this paper, there implement smart blackbox system to use exact vehicle's data using OBD2 protocol rather than blackbox to store external image or video.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.471-472
• /
• 2010

As IT has developed, it provides the convenient facilities in human's life. However, previous parking information systems serve only few things. such as to automatically issue a parking tag, and to show the number of available parking spaces. In this paper, we propose a parking information system providing the shortest way to go to the recommended parking space as well as the abilities served by the previous systems. By utilizing this shortest way information, a driver does not need to hang around a parking lot in order to look for the parking space. Because a parking lot manager can understand the parking lot state by using this system, he is able to deal with any trouble quickly. Therefore, the proposed parking information system reduces both the parking management cost and the number of staffs for the parking lot.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.63-67
• /
• 2009

In RFID system, Tag's Identification data is processed in host computer by application program. Example of application program is parking administration program, library state program etc.. Tag's ID that is recognized in reader is inputted to the Host computer. Application program of computer searches data in DB of computer such as Tag ID. After finding the same ID, host computer send to control command to driver H/W in accordance with application purpose. But, It need to confirm in long distance whether achievement process is acted normally. There will be the 2 methods, when we monitors the process in long distance. One is wired monitoring system, another is wireless monitoring system. Among wire method, internet communication network is useful. RFID system manufacture first in this treatise. RFID system Embody using EM4095 chip that is doing 125KHz by carrier wave. Tag's characteristic ID is sent in remote place through module that use W3100A chip. This system Manufacture, and data send-receive confirmed using simple application program. Reception confirm by result, and pictures show by whole system and each part. And a control program explained of each part.