• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.797-800
• /
• 2004

FED(Field Emission Display)는 CRT(Cathode Ray Tube)의 화질과 LCD(Liquid Crystal Display)와 같은 FPD(Flat Panel Display)의 경량, 박형의 장점을 만족시키는 차세대 Display 소자로서 주목을 받고 있다. 본 논문은 저항열을 이용하여 256 Gray-Scale Level을 출력하는 8 비트 FED Data Driver IC 설계에 관한 것이다. 즉, 저항열과 D/A 변환기를 통하여 디지털 입력 데이터에 따른 아날로그 출력 데이터를 갖는 FED 용 Data Driver IC이다. 본 논문에서 설계된 Driver IC는 집적도를 높여 Output Channel 수를 증가시키는 것을 목표로, 하이닉스 0.6um High Voltage 공정을 사용하였으며, 8 비트 RGB 데이터 입력과 40V 구동전압에서 동작하도록 설계하였다.

• 전기학회논문지
• /
• 제61권4호
• /
• pp.612-616
• /
• 2012

This paper presents an active current regulator for LED driver IC. The proposed driver circuit is consists of DC-DC converter for supplying constant DC voltage to LED, active current regulator for compensating channel-to-channel current error from LED strings and feedback circuit for controlling duty ratio of the converter. The proposed active current regulator senses current of LED channels by equalizing both $V_{DS}$ and $V_{GS}$ at LED current control transistor. Because the proposed circuit directly measures the LED channel current without a sensing resistor and regulates all channel with same regulation loop, the power consumption and the current error are much small compared with previous works. The measured maximum efficiency of overall LED driver IC is approximately 94% and current error of LED channel-to-channel is under ${\pm}1.3%$. The proposed LED driver IC is fabricated Dongbu 0.35um BCD process.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.14-21
• /
• 2012

This paper study a method of modeling and simulation of LED driver circuit for a design optimization. Simplified LED modeling is introduced and a driver IC, HV9910, is modeled by implementing the major function blocks. Circuit of buck type converter is constructed for simulation. Simulation includes not only the internal function of IC but also the various performance results such as LED array current control and dimming. Experiment results are also shown to prove the verification of its usage. This results show that the simulation approach is valid for a circuit optimization and a reduction of development time.

• 한국정보전자통신기술학회논문지
• /
• 제14권4호
• /
• pp.275-283
• /
• 2021

본 연구에서는 저내압 반도체 공정으로 제작 가능한 교류 구동 LED 드라이버 IC를 설계하여, 그 성능들에 대한 시뮬레이션을 수행하였다. 교류 220V에서 직접 구동하기 위한 드라이버 IC를 제작하기 위하여 500V 이상의 항복전압을 만족하는 반도체 제조공정이 필요하다. 고내압 반도체 제조공정은 일반적인 저내압 반도체 공정보다 매우 높은 제조비용을 요구한다. 따라서 낮은 내압의 소자를 구현하는 반도체 공정기술로도 제작할 수 있도록 LED 드라이버 IC를 직렬로 설계하였다. 이는 입력전압이 고전압이라도 각 LED 블록마다 전압이 나누어 인가되는 것을 가능하게 한다. LED 조명회로는 220V에서 96%의 역률을 나타내고 있다. pnp 트랜지스터를 이용한 역률 개선 회로에서는 99.7%의 아주 높은 역률을 얻을 수 있으며, 입력전압의 변동과 관계없이 매우 안정된 동작을 보여주었다.

• 대한전자공학회논문지SD
• /
• 제44권6호
• /
• pp.83-88
• /
• 2007

본 논문에서는 유기발광다이오드 구동 IC의 기능을 검증하기 위하여 PLI(Programing Language Interface)를 이용한 검증방법을 제안한다. 기능 검증을 하기 위하여 HDL(Hardware Description Language) 시뮬레이터와 PLI, GUI(Graphic User Interface) 환경의 이미지 뷰어를 이용한다. 본 논문에서 제안하는 유기발광다이오드 구동 IC의 기능 검증 방법을 이용 할 경우 종래의 기능 검증 방법을 이용 할 때 보다 40배의 실행 시간 이득을 얻을 수 있다. 제안한 방법을 이용할 경우 디스플레이 구동 IC의 설계 단계에서 기능 검증을 효율적으로 할 수 있을 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.11-12
• /
• 2009

In this paper, we propose a high voltage driver IC(HVIC) for LCD and PDP TV power supply. The proposed circuit is included novel a shoot-through protection and a pulse generation circuit for the high voltage driver IC. The proposed circuit has lower variation of dead time and pulse-width about a variation of a process and a supply voltage than a conventional circuit. Especially, the proposed circuit has more excellent pulse-width matching of set and reset signals than the conventional circuit. Also the proposed pulse generation circuit prevent from fault operations using a logic gate. Dead time and pulse-width of the proposed circuit are typical 250 ns, and its variation is maximum 170 ns(68 %) about a variation of a process and a supply voltage. The proposed circuit is designed using $1\;{\mu}m$ 650 V BCD process parameter, and a simulation is carried out using Spectre.

• 제어로봇시스템학회논문지
• /
• 제15권12호
• /
• pp.1197-1202
• /
• 2009

We present a power-efficient driving scheme that consists of piezoelectric actuator and driver IC for AF (Auto-Focus) on ISM (Image Sensor Module). The piezoelectric actuator is more power-efficient than conventional voice coil motor actuator. And high power-efficiency driver IC is designed. So the proposed driving scheme using designed piezoelectric actuator and driver IC is more close to recent trend of green IT. The diver IC should guarantee fast and accurate performance. So, the optimum driving method and high accurate frequency synthesizer are proposed. The die area of designed driver IC is $2.0{\times}1.6mm^2$ and power consumption is 2.8mW.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.572-575
• /
• 2009

In this study, we proposed WLED(White-Light Emitting Diode) driver IC for mobile applications. This IC drove WLED for mobile applications with low input voltage and high efficiency by using boost converter. The device was designed by using boost converter applied current-mode control algorithm and provided PWM(Pulse Width Modulation) & analog dimming. Designed IC consisted of bias block, drive block, control block, protection block. We confirmed this device worked well through a application PCB (Printed Circuit Board) test.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 International Symposium
• /
• pp.21-30
• /
• 2002

According the difference of flex substrate, (reel tape), there are three kind assembly types of LCD driver IC is COG, TCP and COF, respectively. The TCP is the maturest in these types for stability of raw material supply and other specification. And TCP is the major assembly type of LCD driver IC and the huge demand from Taiwan's large TFT LCD panel house since this spring. But due to its package structure and the raw material applied in this package, there is some limitation in fine pitch application of this package type, (TCP). So, COF will be very potential in compact and portable application comparison with TCP in the future. There are three kinds assembly methods in COF, one is ACF by using the anisotropic conductive film to connect the copper lead of tape and gold bump of IC, another is eutectic bonding by using the thermo-pressure to joint the copper lead of tape and gold bump of IC, and last is NCP by using non-conductive paste to adhere the copper lead of tape and gold bump of IC. To have a global realization, this paper will briefly review the status of Taiwan's large TFT panel house, the internal driver IC design house, and the back-end assembly house in the beginning. The different material property of raw material, PI tape is also compared in the paper. The more detail of three kinds of COF assembly method will be described and compared in this paper.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.801-807
• /
• 2009

In this paper, we propose a novel shoot-through protection circuit and pulse generator for half-bridge driver IC. We designed a robust half-bridge driver IC over a variation of processes and power supplies. The proposed circuit is composed a delay circuit using a beta-multiplier reference. The proposed circuit has a lower variation rate of dead time and pulse-width over variation of processes and supply voltages than the conventional circuit. Especially, the proposed circuit has more excellent pulse-width matching of set and reset signals than the conventional circuit. Also, the proposed pulse generator is prevented from fault operations using a logic gate. Dead time and pulse-width of the proposed circuit are typical 250 ns, respectively. The variation ratio is 68%(170 ns) of maximum over variation of processes and supply voltages. The proposed circuit is designed using $1\;{\mu}m$ 650 V BCD (Bipolar, CMOS, DMOS) process parameter, and the simulations are carried out using Spectre simulator of Cadence corporation.