• 한국정보전자통신기술학회논문지
• /
• 제14권2호
• /
• pp.134-139
• /
• 2021

현재 자율주행차량 시장은 3레벨 자율주행차량을 상용화하고 있으나, 여전히 운전자의 주의를 필요로 한다. 3레벨 자율주행 이후 4레벨 자율주행차량에서 가장 주목되는 부분은 차량의 안정성이다. 3레벨과 다르게 4레벨 이후의 자율주행차량은 운전자의 부주의까지 포함하여 자율주행을 실시해야 하기 때문이다. 따라서 본 논문에서는 운전자가 부주의한 상황에서 긴급상황을 알리고 운전자의 반응을 인식하는 자율차량 안전을 위한 긴급상황 알림 및 운전자 반응 확인 시스템을 제안한다. 긴급상황 알림 및 운전자 반응 확인 시스템은 긴급상황 전달 모듈을 사용하여 긴급상황을 텍스트화하여 운전자에게 음성으로 전달하며 운전자 반응 확인 모듈을 사용하여 긴급상황에 대한 운전자의 반응을 인식하고 운전 권한을 운전자에게 넘길지 결정한다. 실험 결과, 긴급상황 전달 모듈의 HMM은 RNN보다 25%, LSTM보다 42.86% 빠른 속도로 음성을 학습했다. 운전자 반응 확인 모듈의 Tacotron2는 deep voice보다 약 20ms, deep mind 보다 약 50ms 더 빨리 텍스트를 음성으로 변환했다. 따라서 긴급상황 알림 및 운전자 반응 확인 시스템은 효율적으로 신경망 모델을 학습시키고, 실시간으로 운전자의 반응을 확인할 수 있다.

• 한국정보처리학회논문지
• /
• 제2권6호
• /
• pp.815-822
• /
• 1995

기존의 유닉스 시스템에서는 모든 장치의 구동기가 커널 내부에 구현되어 있다. 따라서, 새로운 장치를 지원하기 위한 구동기를 추가하거나 기존의 구동기를 변경할 경우 커널 내부의 수정 작업이 불가피하다. 일반적으로 유닉스 시스템에서는 커널내 부의 수정 작업이 매우 어렵다. 본 논문에서는 이러한 어려움을 극복하기 위한 방법 으로써 사용자 수준의 단말기 구동기 모델을 제시한다. 제시한 모델의 기본 개념은 단말기 구동기를 사용자 수준의 서버로 구현함으로써 새로운 단말기 구동기의 동적 재구성을 제공하는 것이다. 제시한 모델의 타당성을 검증하기 위해 사용자 수준의 단말기 구동기를 SunOS 와 Linux 환경에서 구현하고, 그 성능을 평가하였다.

• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4489-4493
• /
• 2014

LED 조명 구동장치는 150W 이상에서 효율과 발열문제가 있고 W(와트)수가 다른 조명기기를 교체하는데 불편함이 있다. 본 논문에서는 멀티채널 LED 조명 구동장치를 드라이버 연동형 구조의 전원시스템과 멀티채널 구조형태의 드라이버 회로내장형으로 설계하였다. 본 개발품은 전원효율 93% 이상 및 역율 0.98 이상의 자동 제어 컨버터 구조로써 드라이버 연동형 구조의 고효율 LED 조명 구동장치와 자기보상방식의 자기최적화 구조의 드라이버다. 따라서, 본 논문은 THD 10% 이하와 기존 컨버터 대비 중량이 40% 이상 감소하였다.

• 제어로봇시스템학회논문지
• /
• 제17권1호
• /
• pp.12-16
• /
• 2011

Most car accidents occur when the driver does not look at the lane. Specially When the driver needs to find the path through the navigation, the driver have to look the other site. The number of such accidents can be prevented, if the driver receives the information without gazing other spot during the car is running. HUD (Head-Up Display) Technology, developed for enhancing the combat effectiveness and pilot's visibility in fighter, is applied to luxury cars for the safe operation of the driver. In recent years, the simple speed, lubrication status etc., as well as navigation information also shows through HUD. HUD is expected to increase in the future. But these HUD show the information elsewhere in the driver's eye focus. It is necessary to focus on the windshield for a few msec to check the information. In this paper, Introduced method display the HUD information in 3D as well as in similar distance the driver's eye focus so that the driver can operate the car more safely.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.320-327
• /
• 2016

We propose a multi-channel current-balancing single switch light-emitting diode (LED) driver for a 3D TV. Conventional LED drivers require non-isolated DC/DC converters as many as the number of LED channels, whereas the proposed LED driver needs only one power switch and several balancing capacitors instead of expensive non-isolated DC/DC converters. Therefore, the proposed driver features a simple structure with low cost and high efficiency. In particular, because its power switch can be turned off under the zero-current switching condition, the proposed driver has desirable advantages, such as improved electromagnetic interference characteristics and high efficiency. Moreover, it only uses a small number of DC blocking capacitors with no additional active devices for the current balancing of multi-channel LEDs. Therefore, the proposed driver exhibits high reliability and cost effectiveness. To confirm the validity of the proposed driver, we perform a theoretical analysis and present design considerations and experimental results obtained from a prototype that is applicable to a 46" LED TV.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.122-129
• /
• 2015

In this study, we propose a low voltage stress and cost-effective light emitting diode (LED) driver capable of multi-channel current balancing. Conventional LED drivers require as many boost converters as the number of LED channels, whereas the proposed LED driver requires only one buck converter and several balancing capacitors instead of several expensive boost converters. Additionally, while the components of the boost converter have high voltage stress and depend on the LED driving voltage, components of the proposed driver have about one-half of the voltage stress across all components. The proposed driver exhibits high reliability and cost effectiveness because it only uses few DC blocking capacitors with no additional active devices to balance the current of multi-channel LEDs. The proposed driver exhibits high reliability and cost effectiveness. The validity of the proposed driver is confirmed through a theoretical analysis. An explanation of the design considerations and experimental results were obtained using a prototype applicable to a 46" LED-TV.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.125-131
• /
• 2012

PURPOSES : Road lighting facilities increase the visibility of road at night in order to improve traffic driver safety and comfort. Generally speaking, current pole lighting has a tendency to create problems of glare and flicker. The phenomenon of glare gives discomfort due to increase of scattered light, when high luminance is in driver's field of view. The phenomenon of flicker occurs due to the driver passing through discontinuous pockets of pole lighting areas. These phenomenon increase eye strain and decrease driver safety. METHODS : Low height line lighting that distributes light lower than driver's eye level has been developed and evaluated to reduce the problems linked to current pole lighting. A test was undertaken with 4 conditions(turn on the general pole lighting, turn off alternate pole lighting, turn on the line lighting and line lighting with 50% dimming). A driver written survey was conducted in order to gain driver feedback. RESULTS : Pupil size and brow frequency compared with degree in pole lighting are reduced. CONCLUSIONS : Low height line lighting environment makes drivers more comfortable than pole lighting environment and is positive lighting method in the energy saving and landscape aspect.

• 산경연구논집
• /
• 제8권6호
• /
• pp.25-31
• /
• 2017

Purpose - This study examines car accidents that occurred in South Korea territory, and analyzes criminal liability of the offender and certain issues of driver's insurance, but a civil liability to the injured is excluded as civil liability belongs to auto insurance. Research design, data, and methodology - With carrying out this research, case study of driver's liability and literature review were adopted throughout. For this, car accidents that occurred in South Korean territory were examined and then criminal liability of the offender and certain issues of driver's insurance were analyzed. Results - From this case study on driver's liability it was found that the offender cannot receive insurance money from the insurer irrespective of the valid drive insurance, if there is no 'bill of agreement of criminal consensus'. This study suggests some ideas, offers suggestions of convenience and assistance of qualified claim staff to overcome a hurdle of drive insurance. Conclusions - As long as the accident is not a fraud and scam by the parties concerned, advance payment of agreement of criminal consensus is required to the insured, the policy holder within the limit of liability of driver insurance, on condition that the drive insurance is valid.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.519-527
• /
• 2012

A high step-down multiple-output LED driver is proposed in this paper. Firstly, the derivation of the driver with dual-output is presented and its operation principle and steady state performance are analyzed in detail. Secondly, a high step-down N-channel LED driver is proposed and its current auto-balance characteristic and step-down ratio are analyzed. Finally, an experimental prototype is built and the experimental results are given. The theoretical analysis and experimental results show that the proposed driver has the following virtues: First, if load balancing is achieved, the voltage gain is 1/N that of a Buck driver, where N is the number of channels. Second, each output automatically has an equal output current, without requiring more current close-loop control circuits than a Buck driver. Last, the voltage stresses of the switches and diodes are lower than those of a Buck driver, meaning that lower voltage switches and diodes can be used, and a higher efficiency can be expected.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1154-1164
• /
• 2015

This paper proposes a fully sensorless driver for a permanent magnet synchronous motor (PMSM) integrated with a digital motor controller and an analog pre-driver, including sensing circuits and estimators. In the motor controller, a position estimator estimates the back electromotive force and rotor position using a sliding-mode observer. In the pre-driver, drivers for the power devices are designed with a level shifter and isolation technique. In addition, a current sensing circuit measures a three-phase current. All of these circuits are integrated in a single chip such that the driver achieves control of the speed with high accuracy. Using an IC fabricated using a $0.18{\mu}m$ BCDMOS process, the performance was verified experimentally. The driver showed stable operation in spite of the variation in speed and load, a similar efficiency near 1% compared to a commercial driver, a low speed error of about 0.1%, and therefore good performance for the PMSM drive.