• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.125-131
• /
• 2012

PURPOSES : Road lighting facilities increase the visibility of road at night in order to improve traffic driver safety and comfort. Generally speaking, current pole lighting has a tendency to create problems of glare and flicker. The phenomenon of glare gives discomfort due to increase of scattered light, when high luminance is in driver's field of view. The phenomenon of flicker occurs due to the driver passing through discontinuous pockets of pole lighting areas. These phenomenon increase eye strain and decrease driver safety. METHODS : Low height line lighting that distributes light lower than driver's eye level has been developed and evaluated to reduce the problems linked to current pole lighting. A test was undertaken with 4 conditions(turn on the general pole lighting, turn off alternate pole lighting, turn on the line lighting and line lighting with 50% dimming). A driver written survey was conducted in order to gain driver feedback. RESULTS : Pupil size and brow frequency compared with degree in pole lighting are reduced. CONCLUSIONS : Low height line lighting environment makes drivers more comfortable than pole lighting environment and is positive lighting method in the energy saving and landscape aspect.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.1-11
• /
• 2006

Currently, road mobility improved from the National Road Improvement. Nevertheless delineation system is facility that enhanced driver's safety, that was set up often inconsistent or nonexistent over the road exit ramp So it judged functional investigation will be necessary. This study suggested setting type of the delineation system. That was based on a field study and reviews the legal standard of it and considering driver's cognition behavior. For the study, make a 3D-simulation and so could objectively a comparative test. Comparison variable between delineation setting type is selected conspicuity and visibility. Cased that illustrated characteristics of driver's visual cognition behavior. The experiment was used Eye Marker Recorder for measure the gaze frequency more quantitatively and objectively. And used the ANOVA analysis for significance testing between delineation setting type. A significant percent of the conspicuity analyzed types(Safe mark, Obstacle Sign, Warning Light, and Tubular Maker) in road exit ramp for recognize. And gaze frequency that measure of effectiveness of visibility are measured. On the analysis result, the visibility was significance difference between delineation setting type and visibility of types was best.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.116-126
• /
• 2013

Weather factor to affect driver's driving environment are due to changes in weather conditions is caused rainfall, snowfall, fog etc and the reducing of road capacity and because deteriorating weather could be affect the headway and vehicle speed and the decrease in lane caused by an accident occurs that was analyzed that bad weather occur congestion greater than on the clear day. Bad weather to reduce of the driver's visibility was analysed the sensitive to changes in travel speed and traffic accident to appears high characteristics according to weather conditions on the expressway(higher speed) than general road. As a result, visibility have been determined to be important factor in changes of the highway traffic flow characteristics. Therefore, in this study, we selected traffic volume and travle speed that have a major impact on high-speed expressway basic segments as importance effect factor and we selected to subject of analysis among the Metropolitan Expressway that it could be obtained certain level of traffic volume data and we studied the changing of expressway traffic flow due to change visibility after the collecting of meteorological and traffic data. In order to perform this study, data collection and analysis methods were established through the existing literature and we had selected level of visibility of the expressway and we had performed the statistical verification. Finally, we had calculated the rate of change of expressway traffic flow characteristics due to visibility and we had come up with a way to apply at capacity and service level analysis.

• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.36-40
• /
• 2018

The car requires an inside mirror installed between the driver's seat and the passenger's seat to ensure the driver's rear and side view of the driver. Inside mirrors must always be attached to the vehicle to ensure the driver's visibility. Inside mirrors attached to the windshield of a vehicle are always exposed to direct sunlight and should be semi-permanently usable in hot and humid summer weather in Korea. Therefore, the mirror mount, which is the junction of the inside mirror, is particularly important in corrosion resistance and wear resistance suitable for humidity. Mirror mounts are currently difficult to manufacture due to their reliance on powder molding technology in advanced countries such as Japan and Germany. This paper focuses on the fabrication of high corrosion resistant stainless mirror mounts by vacuum sintering technique and focuses on the selection of materials suitable for the production of mirror mounts through experiments of 300 series stainless steel and 400 series stainless steel manufactured by vacuum sintering.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.97-114
• /
• 2022

Unlike ground roads, the on-ramp merging section of underground roads cannot be seen by drivers of main road due to tunnels. In this study, a driving simulator was used for analysis, and virtual driving experiments were carried out to assess the driver's visibility for different design factors. The driver's driving behavior was analyzed by setting scenarios considering the length of chevron markings and the approach speed from the main road. The results of the analysis were used to determine the design factors for ensuring visibility when constructing the virtual driving environment for each scenario. These factors, including speed, lane change points, and driver's gaze ratios, were reviewed for significance using a statistical approach. As a result, in scenarios with a higher approach speed from the main road, it was discovered that there was a difference in driver's behavior between specific scenarios depending on the length of the section with chevron markings. Based on these findings, this study suggests implications and feasible solutions to improve driver safety on the on-ramp merging section of underground roads.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.403-412
• /
• 2011

On a curve radius, there is speed deviation because a driver who is on the curve radius can have visual distortion. The curve radius can be more dangerous than a straight radius by many reasons. Especially, visibility paralysis of delineator that is because of night and bad weather. Can pervert the information about curve sections, it threatens safety. More over accident risk is increased by influence to travel speed. Therefore, it needs to build and control delineators for driver's visibility. Therefore, this study focus on finding the two types of delineator(the retro-reflection and inside-lighting delineator) by insight-surveying and the operating speed are compared by survey and operating speed. Finally, inside-lighting delineator will be selected in terms of safety at the curve sections. The inside-lighting delineator was more effective than the retro-reflection delineator on visibility, the necessity of reduction of speed and will reduce the hazard at curve sections. Also, the study analyzes safety is guaranteed by the slight reduction of speed when the driver enters a curve radius with inside-lighting delineator. As a result, the inside-lighting delineator can give the information about horizontal and vertical profile effectively, so it can reduce the accident risk. And it can use to improve traffic safety on curve radius.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.260-266
• /
• 1997

The Navigation Streets Map that directly supplies information for a driver plays an important role in Car Navigation System(CNS). Therefore, cause the compatibility, preference, visibility, and readability of the navigation streets map will be hold sway over driver's information acquisition, safety, and performance in CNS, it is important that designer's requirements should be analyuzed for ergonomic design of navigation streets map. Especially, there are differences between the topographical objects marking method and that of the general map in a navigation streets map. Because much information is marked in a narrow space, it is important that the text information should be done in navigation streets map. Also, because it is a important factor to mark the text format for the marking method of the topographical objects, the design requirements will be drawn out through the factor analysis for the text marking method. And when ergonomic designers are doing, this result will be basic research for developing driving simulator of CNS and it will be a ergonomic guideline of navigation streets map.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.105-115
• /
• 2015

PURPOSES : This study aimed to evaluate the appropriateness of safety with the standard for threshold zone luminance as specified in the Recommendation for Lighting of Traffic Tunnel, which has been widely adopted worldwide. METHODS : A driving test of the subject in a full-scale road tunnel was conducted. The adaptation luminance and threshold zone luminance, which should be known for the driver to perceive an object within stopping sight distance, were obtained. These values were compared with the adaptation luminance and threshold zone luminance obtained by the existing reduced model test and tunnel lighting standard that has served as a guideline for the current threshold zone luminance standard. RESULTS : According to this study, threshold zone luminance should be increased to at least 1.8 times the value proposed in the existing studies and to twice the domestic tunnel lighting standard (KS C 3703: 2014). CONCLUSIONS : The threshold zone luminance proposed in this study differs largely from that obtained from indoor tests and from the current tunnel lighting standard used worldwide; this difference may be attributed to the fact that the indoor tests did not incorporate driving workload, non-uniformity of luminance distribution in terms of sight, and factors that reduce the visibility of the driver, such as the light reflected into the driver's eyes. Hence, it is necessary to further review the factors that reduce the visibility of drivers approaching tunnels in order to determine the rational tunnel threshold zone luminance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.186-193
• /
• 2020

We investigate a fog-detection CCT control system using low deck lighting as a solution to the forward visibility of pole-type street lamps employed on existing roads. The lighting standards were met with a light source that has less compared with those of pole-type street lamps. The results show that the transmission rate was increased by changing the color temperature by automatically recognizing fog in bad weather and minimizing the phenomenon of lighting. In addition, it was allowed to create a safer and more comfortable driving environment for drivers owing to flicker or light pollution of existing pole-type street lamps. As a result, if lighting is used at a lower level than pole-type street lamps, the accident rate caused by securing the driver's forward visibility can be reduced sharply and existing problems can be resolved.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.06a
• /
• pp.255-256
• /
• 2014