• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.93-100
• /
• 2011

Maintenance of adequate soil water potential during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement within and below the rooting zone can facilitate optimal irrigation scheduling aimed at minimizing the adverse effects of water stress on crop growth and development and the leaching of water below the root zone which can have adverse environmental effects. The objective of this study was to evaluate the feasibility of using a portable irrigation controller with an Watermark sensor for the cultivation of drip-irrigated vegetable crops in a greenhouse. The control capability of the irrigation controller for a soil water potential of -20 kPa was evaluated under summer conditions by cultivating 45-day-old tomato plants grown in three differently textured soils (sandy loam, loam, and loamy sands). Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30 cm depths. Even though a repeatable cycling of soil water potential occurred for the potential treatment, the lower limit of the Watermark (about 0 kPa) obtained in this study presented a limitation of using the Watermark sensor for optimal irrigation of tomato plants where -20 kPa was used as a point for triggering irrigations. This problem might be related to the slow response time and inadequate soil-sensor interface of the Watermark sensor as compared to a porous and ceramic cup-based tensiometer with a sensitive pressure transducer. In addition, the irrigation time of 50 to 60 min at each of the irrigation operation gave a rapid drop of the potential to zero, resulting in over irrigation of tomatoes. There were differences in water content among the three different soil types under the variable rate irrigation, showing a range of water contents of 16 to 24%, 17 to 28%, and 24 to 32% for loamy sand, sandy loam, and loam soils, respectively. The greatest rate increase in water content was observed in the top of 10 cm depth of sandy loam soil within almost 60 min from the start of irrigation.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.125-129
• /
• 2004

This study was conducted to identify the growth characteristics of melon cultivated with mixture medium of scoria and perlite in capillary system. The growth and fruit characteristics of all cultivars cultivated under the nutrient solution capillary supplying system were comprehensively favorable. Fresh fruit weight of the three cultivars was similar to weight criterion (1.8 - 2.0 kg/fruit) of melon. In melon of non-net type ‘Aris’ there were no differences in fruit characteristics between nutrient solution supply methods, but total soluble solid (TSS) was higher in drip and capillary systems showing $15.6^{\circ}$Brix and 15.5$^{\circ}$Brix, respectively, than that of mist spray system showing $14.4^{\circ}$Brix. In melon of net type, ‘Earl's elite’, drip and capillary systems showed better fruit characteristics and higher values of TSS compared to mist spray system. The change in pH in the medium before and after melon cropping was not significant between systems, but the pH of upper layer within medium in all system was higher than that of lower layer. The mineral content within lower layer showed higher value than that of the upper layer in drip system, but reversed in capillary system.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.58-58
• /
• 2022

With the development of advanced technology, automation of agricultural work is spreading. In association with the 4th industrial revolution-based technology, research on field smart farm technology is being actively conducted. A state-of-the-art unmanned automated agricultural production demonstration complex was established in Naju-si, Jeollanam-do. For the operation of the demonstration area platform, it is necessary to build a sophisticated, advanced, and intelligent field smart farming model. For the operation of the unmanned automated agricultural production demonstration area platform, we are building data on the growth of soybean for smart cultivated crops and conducting research to determine the optimal time for agricultural work. In order to operate an unmanned automation platform, data is collected to discover digital factors for water management immediately after planting, water management during the growing season, and determination of harvest time. A subsurface drip irrigation system was established for smart water management. Irrigation was carried out when the soil moisture was less than 20%. For effective water management, soil moisture was measured at the surface, 15cm, and 30cm depth. Vegetation indices were collected using drones to find key factors in soybean production prediction. In addition, major growth characteristics such as stem length, number of branches, number of nodes on the main stem, leaf area index, and dry weight were investigated. By discovering digital factors for effective decision-making through data construction, it is expected to greatly enhance the efficiency of the operation of the unmanned automated agricultural production demonstration area.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2004.11a
• /
• pp.49-52
• /
• 2004

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.469-469
• /
• 2011

점적관개는 과수원이나 시설재배에서 수량 및 품질을 향상시키기 위해 물을 효율적으로 사용하여, 비료 및 농약 등에 의한 비점원 오염을 감소시킬 수 있는 방법으로 자주 고려되어 왔다. 효율적인 점적관개를 위해서는 관개시 토양의 수분 분포에 대한 정보가 필요하며, 이는 점적기의 간격, 관개수량 기준에 중요한 기초자료로 활용된다. 시설재배지에서 토양수분의 관리 및 관개를 위한 점적기 설치 간격, 유량은 현재 관리자의 경험적인 지식에 의존하고 있으며, 재배지 토성의 변화에 적절히 대응 할 수 있는 설계 기준 구축이 전무한 상태이다. 본 연구에서는 점적관개 시 토양수분 분포의 변화 양상을 국내토양 및 시설재배 현황을 반영하여 실험설계를 실시하였으며 토양수분 재분배 및 균일성 평가 방법을 적용하여, 적정 점적관개 시스템의 설계 및 운영에 필요한 기초자료를 제공하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.4
• /
• pp.269-274
• /
• 1994

An experiment was carried out to investigate the effects of irrigation period on the yield and quality of melon (Cucumis melo L.) cultivated in green house 1992~1993. Four different irrigation period was applied ; from transplanting to harvest(Irrigation I), from initial flowering to 35 days after flowering(Irrigation II), from initial flowering to 20 days after flowering(Irrigation III), from initial flowering to 5 days after flowering(Irrigation IV). The water was applied by drip irrigation when the soil water potential of 15cm depth reach at -0.5bar. The results obtained were as follows ; 1. The amount of water applied during the periods were 170.5mm, 145.0mm,126.9mm and 78.8mm for irrigation period I, II, III and IV, respectively. 2. Average evapotranspiration during the cultivation of melon was 3.31mm/day. Evapotranspiration was the highest at the period from 5days after flowering to 15days after flowering. 3. The total yield was increased with the higer amount of water applied, and the yield was in the order of Irrigation I, II, III and IV. However, the yield with economically high quality was the highest in Irrigation III. 4. The sugar content and quality of Net form were decreased with higher irrigation amount.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.309-315
• /
• 2009

Maintenance of adequate soil water content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement for precision irrigation would allow efficient supply of water to crops, thereby resulting in minimization of water drainage and contamination of ground water. This research reports on the characterization of spatial and temporal variations in water contents through three different textured soils, such as loam, sandy loam, and loamy sand, when water is applied on the soil surface using an one-line drip irrigation system and the soils are dried after the irrigation stops, respectively. Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30cm depths. Spatial variability in water content for each soil type was strongly influenced by soil textural class. There were big differences in wetting pattern and the rate of downward movement between loam and sandy loam soils, showing that the loam soil had a wider wetting pattern and a slower rate of downward movement than did the sandy loam soil. The wetting pattern in loamy sand soil was not apparent due to a low variability in water content (< 10%) by a lower-water holding capacity as compared to those measured in the loam and sandy loam soils, implying that the rate of water drainage below a depth of 30cm was high. When soils were dried, there were highly exponential relationships between water content and time elapsed after irrigation stops ($r^2$${\geq}$0.98). It was estimated that equilibrium moisture contents for loam, sandy loam, and loamy sand soils would be 17.6%, 6.2%, and 4.2%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.201-209
• /
• 2021

There is a growing interest in rice cultivation on farms with irrigation facilities in desert climates. We investigated the growth characteristics and yields of two rice cultivars (FL478 and Asemi) irrigated at field capacities (FCs) of 80%, 100%, and 120% in a lysimeter with coarse sandy soils. The results showed that at the heading stage, the FC 100% treatment had the highest plant height and number of tillers between the two cultivars. At the harvest period, the culm and panicle lengths of both cultivars at FC 100% were similar to those of the control. In contrast, the number of panicles, grain number per panicle, and percentage of ripened grains were the highest in the control. Moreover, FL478 and Asemi had the highest grain yields of 1.40 and 2.20 kg·pot^-1 in the control, respectively. For both cultivars, the grain yields of the FC 100% and FC 120% treatments were approximately 70% of the control. In comparison, FL478 and Asemi had the highest water productivity of 0.45 and 0.63 kg·m^3-1 for the FC 80% treatment, followed by the FC 100% treatment (0.42 and 0.59 kg·m^3-1, respectively), which was nearly 14.3% and 20.3% higher than that of the control. Therefore, we found that irrigation at FC 100% is anticipated to be effective in managing surface drip irrigation for rice cultivation in desert climates in arid environments, while maintaining rice yields.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.300-310
• /
• 2022

The objective of this experiment was to investigate the effect of drip irrigation volume on tomatoes (Solanum lycopersicum L.) grown in a greenhouse using perlite medium. Plants were treated by three different irrigation treatment I₀, I₂₅, and I₅₀ (where irrigation volume of I₂₅ and I₅₀ was 25% and 50% higher than I₀, having limited or no leaching). Growth characteristics of plants, yield and water use efficiency were measured. The result showed that plant height, leaf length and leaf width were lowest in the I₀ treated plants. However, these parameters were not statistically significant differences between the plants that were grown in the I₂₅ and I₅₀ treatment. Soluble solids content, acidity and dry matter of 111th, 132nd, and 143rd days harvested tomato were higher in the plants irrigated with lowest volume (I₀) than the higher volume (I₂₅ or I₅₀). In addition, water content was lower in the 111th and 132nd days of harvested tomatoes from the I₀ treatment. The number of big-size tomatoes (>180 g) was significantly higher in the I₂₅ irrigated plants. There was no significant difference in the total number of harvested fruits among the treatments. The average fruit weight and total yield of harvested tomatoes were lowest in the I₀ treated plants. The water consumption of tomato was not significantly different amongst the treatments but water use efficiency was lowest in the I₀ treatment. Principal component analysis revealed that total soluble solid and acidity of tomato showed a positive correlation between each other. These results suggest that I₂₅ was the optimum irrigation treatment for tomato based on its measured growth characteristics, yield and water use efficiency.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.579-584
• /
• 2001

This experiment was conducted to investigate the effect of soil moisture content on cut flower quality of Gypsophila paniculata L. 'Bristol Fairy' in spring and autumn cultivations. The soil moisture potential (SMP) set point for irrigation was either -3.2 or -10.0kPa in the vegetative growth stage, and -10.0, -31.6, or -79.4kPa after the budding stage. When soil moisture reached at each set SMP point, 10 mm water was drip-irrigated. Tendency of flowering was earlier as SMP set point was lower in both vegetative growth and after budding stages. No other flower characteristics were found among other treatments. In both spring and autumn cultivations, as SMP set point was lower, the low primary branch length and upper internode length were decreased, the stem firmness was increased, and curvature of cut flower stem was decreased. Especially, in autumn, the higher the SMP set point, the higher the low primary branch than the apex, thus the paniculate inflorescence was deeply destroyed. Yield in spring cultivation was not significantly different among treatments, while that in autumn cultivation increased as the lower the SMP value. It is thought that optimal imgation points during vegetative growth and after budding stages to produce high quality cut flowers are -10.0 and -79.4kPa, respectively.