• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.769-774
• /
• 2003

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it in order to do capability at every fields. We have been close to demand new capability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate. Therefore, For solving the problems we apply to a packing method for using dried materials. That is to say it is a kind of making into an instant. In this study, There is a purpose to present fundamental data, comparing and analyzing a phenomenon about aggregate's absorption following the rate of adding water, for using existing materials.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.185-189
• /
• 2009

Microencapsulation of flavor was carried out by molecular inclusion process using $\beta$-cyclodextrin (${\beta}CD$). ${\beta}CD$-flavor complex was prepared at various flavor-to-${\beta}CD$ ratios (1:6-1:12) to determine the effect of ${\beta}CD$ concentration on the inclusion efficiency. Maximum total oil retention and minimal surface oil content were obtained at flavors to ${\beta}CD$ ratio of 1:10. The physical properties and controlled release pattern of flavors from ${\beta}CD$-flavor complex were measured and compared with spray-dried microcapsules prepared using carbohydrate wall system. ${\beta}CD$-flavor complex showed higher total oil retention and surface oil contents, smaller mean particle size, lower moisture uptake, and higher oxidation stability than spray-dried microcapsule. Oxidative stability of flavor was correlated with hygroscopicity of wall materials. The controlled release mechanism was highly affected by temperature and characteristics of wall materials.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.216-221
• /
• 2015

Sintering behavior of 3%yttria-stabilized zirconia was comparatively studied using a spray-dried powder produced by a domestic and global company. Quality of the sintered block was analysed in terms of relative density, shrinkage rate, grain growth, hardness, and fracture toughness. Relative density, shrinkage rate, and hardness value of the finally sintered block was similar between domestic and global zirconia powder, respectively. But, flexural strength of the domestic powder specimen was about 70% of the sintered block produced by using a global powder. The poor sintering quality of the domestic powder was discussed in relation with compressibility of the spray-dried granule-type powder and the amount of monoclinic phase in the as-received powder.

• Applied Biological Chemistry
• /
• 제41권2호
• /
• pp.187-190
• /
• 1998

동결건조(凍結乾燥)한 누에 유래(4령유충(齡幼蟲), 암 수 번데기, 암 수 성충(成蟲)) 및 건조 뽕나무 유래 재료(잎, 오디, 상백피(桑白皮))의 메탄을 추출물, 백강잠(白彊蠶) 및 누에 4령유충(齡幼蟲) 잠분(蠶糞)의 메탄올 추출물의 5종 인간(人間) 암세포주(癌細胞株)(A549 lung, SK-OV-2 ovarian, SK-MEL-2 melanoma, XF-498 CNS, HCT-15 colon tumor cell lines)에 대한 세포독성(細胞毒性)을 sulforhodamine B법을 이용하여 in vitro 검정하였다. 공시시료중 잠분(蠶糞)의 70% 메탄올 열탕추출물(熱湯抽出物)은 이들 암세포주(癌細胞株)에 대하여 강한 세포독성(細胞毒性)을 나타내었으나, 잠분(蠶糞)의 메탄올 추출물 및 오디와 상백피(桑白皮)의 메탄을 추출물은 중간 정도의 활성을 보였다. 기타 물질들은 이들 암세포주(癌細胞株)에 거의 독성을 보이지 않았다. 70% 메탄올 열탕추출물(熱湯抽出物)이 강한 세포독성(細胞毒性)을 나타내어, 용매 분획한 결과 클로로포름과 에틸아세테이트 획분이 암세포주(癌細胞株)에 대하여 가장 강한 세포독성(細胞毒性)을 보였다. 결론적으로, 잠분(蠶糞), 상백피(桑白皮) 및 오디의 항암활성(抗癌活性)은 이들의 약리작용의 일부를 설명할 수 있을 것으로 생각된다.

• 한국식품조리과학회지
• /
• 제19권5호
• /
• pp.555-561
• /
• 2003

The purpose of this study was to analyze the microbiological hazards of dried fish (Jwieochae, Ojingeochae and Bugeochae), and to apply pretreatment methods to increase the safety of cooked dried fish within foodservice establishments. Microbiological inspections were conducted on Total Plate Count, Coliforms, E. coli, E. coli O157:H7, Staphylococcus aureus, Salmonella spp. and Listeria monocytogenes. The study results are summarized as follows. According to the Hazard analysis, there are many problems showing high numbers in terms of Total Plate Count and Coliforms, which were both well over acceptable standard levels. E. coli and Staphylococcus aureus were detected at certain foodservice establishments, while E. coli O157:H7, Salmonella spp. and Listeria monocytogenes were not detected at all. By applying various pretreatment methods, such as washing, blanching, pan frying and microwave heating, the levels of microbiological hazards were able to be controlled and lowered. Blanching was the most effective method, followed by panfrying, microwave heating and washing. The Total Plate Counts gradually decreased with increasing number of times washed and seconds panfried. From these results, it is concluded that to guarantee food safety, cooked dried fish raw materials should be kept hygienically and appropriate pretreatment methods applied before cooking.

• 한국세라믹학회지
• /
• 제44권8호
• /
• pp.457-463
• /
• 2007

Y, Ba and Cu nitrates were precipitated by oxalic acid at pH 4. The Y, Ba and Cu oxalate powders were vacuum dried and characterized by XRD, DT/TGA and etc. Yttrium nitrate precipitated as $NH_4Y(C_2O_4){_2}H_2O$ and converted to $Y_2O_3$ above $450^{\circ}C$. Ba precipitated with two phases, $Ba(HC_2O_4){_2}2H_2O\;and\;Ba(C_2O_4)$. The amount of each precipitates was 4 : 1, Cu precipitated non-hydrated form, $Cu(C_2O_4)$. The vacuum drying was successful to characterize precipitated powder, which had been generally known as amorphous gel.

• Food Science and Biotechnology
• /
• 제17권1호
• /
• pp.72-79
• /
• 2008

In this study, changes in the physicochemical properties and functional components of uncooked foods, including carrots, cabbage, shiitake (Lentinus edodes) and white button (Agaricus bisporus) mushrooms, sea mustard, and laver treated with electrolyzed water were investigated. No changes were observed in the primary compositions of any of the materials that were hot air- or freeze-dried after being treated with electrolyzed water. The lightness (L), redness (a), and yellowness (b) values of the carrots, shiitake, and laver were not affected by drying, while changes did occur in the cabbage (L-, a-, and b-values), mushrooms (a-value), and sea mustard (b-value) specimens that were hot air- or freeze-dried following the treatments with electrolyzed water. The dietary fiber contents of all the materials increased when they were hot air-dried. Vitamin C content decreased when the samples were treated with alkalic electrolyzed water. No changes occurred in the lectin, $\beta$-carotene, or total phenolic compound contents after the electrolyzed water treatments, suggesting that electrolyzed water could be used effectively as a pasteurization step for uncooked carrots, cabbage, shiitake and white button mushrooms, sea mustard, and laver.

• Corrosion Science and Technology
• /
• 제3권2호
• /
• pp.47-53
• /
• 2004

The conditions to simulate the atmospheric corrosion behavior in the laboratory were investigated to clarify atmospheric corrosion mechanism of steel material in coastal area, For airborne sea salt and artificial seawater droplet, the various behaviors were observed by optical microscope, The particle size of the dried airborne sea salt was about $20{\mu}m$, and was about 1/10 compared with the artificial seawater droplet. Though the airborne sea salt represented the same behavior as the thermodynamic water absorption, the behavior of the artificial seawater droplet deviated from the results of the thermodynamic calculation, It is concluded that the water absorption behavior is influenced by the particle size of the dried sea salt. The corrosion behaviors of carbon steels were observed under the deposited condition of airborne sea salt and artificial seawater droplet. The corrosion behaviors showed a different trend, indicating that the corrosion behavior depended on the particle size of the dried sea salt. The corrosion in the actual environrnent progressed greater than that in the chamber. Furthermore, the summer showed the greater corrosion than the spring. It is found that the corrosion behaviors are attributed to the influence of the environmental factors.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.52-60
• /
• 1997

Hornbeam trees(Carpinus laxiflora BL.) are growing in Korea and have good characteristics such as relatively high density, fine texture, split- resistance, and white colour. However, they have seldom been used as manufacturing materials This study was carried out to evaluate the possibility of using hornbeam wood as bent, wood furniture materials. Softening methods were steaming and micro-wave heating. The specimens of $15{\times}15{\times}350mm$ were used green or air-dried, and were steamed at $100^{\circ}C$ for 20min, or microwave heat ed f or 60 seconds. The bending processing conditions are showed in Table 3. The minimum solid-bending radii of air-dried wood were 40mm for steaming and 200mm for micro-wave heating, respectively. And that of green wood were 40mm for micro-wave heating. In conclusion, both of the steamed wood and micro-wave heated green wood showed very good solid bending processing properties, but micro-wave heated air-dried wood were not sufficient for bent-wood furniture.

• Journal of the Korean Wood Science and Technology
• /
• 제11권2호
• /
• pp.52-60
• /
• 1983

Hornbeam trees(Carpinus laxiflora BL.) are growing in Korea and have good characteristics such as relatively high density, fine texture, split-resistance, and white colour. However, they have seldom been used as manufacturing materials This study was carried out to evaluate the possibility of using hornbeam wood as bent-wood furniture materials. Softening methods were steaming and micro-wave heating. The specimens of $15{\times}15{\times}350mm$ were used green or air-dried, and were steamed at $100^{\circ}C$ for 20min, or microwave heated for 60 seconds. The bending processing conditions are showed in Table 3. The minimum solid-bending radii of air-dried wood were 40mm for steaming and 200mm for micro-wave heating, respectively. And that of green wood were 40mm for micro-wave heating. In conclusion, both of the steamed wood and micro-wave heated green wood showed very good solid bending processing properties, but micro-wave heated air-dried wood were not sufficient for bent-wood furniture.