• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.160-165
• /
• 1999

In surface grinding, the conditions of the grinding wheel give a significant effect on the ground workpieces comparing with other metal removal provesses. In this paper, to assist the development, a non-contacting optical method by the laser beam is introduced. The in-process measurement of scattering intensities has been made during surface grinding processes and the surface textures of wheel working surfaces are captured. Also, in order to determine the dressing time monitoring method of a grinding wheel, a three-dimensional computer simulation of the grinding operation has been attempted based on the contact mechanism and the surface-shaping system between the grinding wheel and the workpiece. The optimal dressing time is determined by the amount of the grain wear and work surface roughness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.599-602
• /
• 2000

A new dressing technique with utilizes electrolytic phenomenon for realizing effective mirror surface grindings with metal bonded super-abrasive wheels is called “Electrolytic In-process Dressing Grinding”. This technique enabled metal bonded micro-grain wheels, such as micro-grain cast iron fiber bonded wheels, to be used for mirror surface finish processes effectively. But this technique requires a lot of knowledge and experience to perform. And the condition of dressing is variable according to the time. Therefore adaptation of Monitoring and Control technique is needed.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.407-412
• /
• 2008

Purpose: Hydrofluoric acid(HF) is one of the most dangerous mineral acids with the dissociated fluoride ions. The initial corrosive burn is caused by free hydrogen ion, and the second and more severe burn is caused by penetration of fluoride ions into subcutaneous tissues. Silver is a cation producing dressing, an effective antimicrobial agent, but older silver-containing formulations are rapidly inactivated by wound environment, requiring frequent replenishment. But, $Acticoat^{(R)}$ is a relatively new form of silver dressing which helps avoid the problems of earlier agents. The aim of this study is to evaluate effects of $Acticoat^{(R)}$, silver-containing dressing on the treatment for HF injury wound. Methods: From september 2006 to september 2007, the study was carried out with 10 patients who had HF partial thickness burns. $Acticoat^{(R)}$ dressing and 10% calcium gluconate wet gauze dressings in 10 cases. As a principle, in the emergency treatment, partial or complete removal of the nail and early bullectomy along with copious washing with normal saline was done, depending on the degree of HF invasion of the wound. Wound was dressed with $Acticoat^{(R)}$ and 10% calcium gluconate solution. The effect of dressing was investgated by serial bacterial culture and wound exudates assessment. Results: We therefore reviewed 10 cases of HF-induced chemical burns and treatment principle. The 10 cases who came to the hospital nearly immediately after the injury healed completely without sequelae. Conclusion: As the industrial sector develops, the use of HF is increasing more and more, leading to increased incidences of HF-induced chemical burns. The education of patients regarding this subject should be empathized accordingly. In conclusion, $Acticoat^{(R)}$ dressing is a better choice for HF partial thickness burn injuries because of shorter healing time, less pain and more comfortable dressing.

• The Research Journal of the Costume Culture
• /
• v.23 no.5
• /
• pp.876-893
• /
• 2015

The purpose of this study is to identify the influences of psychological variables and fashion-related psychological variables on purchasing fashion items on the Internet. Boredom proneness and public self-consciousness were selected as psychological variables, and dressing style was selected as a fashion-related psychological variable. It was hypothesized that boredom proneness and public self-consciousness not only influence the purchasing frequency of fashion items on the Internet directly, but also indirectly through dressing style. Data were gathered by surveying university students in Seoul using convenience sampling. Two hundred and eighty-six questionnaires were used in the statistical analysis. SPSS was used for exploratory factor analysis, and AMOS was used for hypothesized relationship testing. The factor analysis of boredom proneness revealed five dimensions, "helplessness," "affective response," "lack of internal stimulation," "lack of external stimulation," and "perception of time." The factor analysis of public self-consciousness revealed two dimensions, "appearance-consciousness" and "style-consciousness," and the factor analysis of dressing style revealed one dimension. The overall fit of the hypothesized model suggests that the model fits the data well. The hypothesized relationship test proved that boredom proneness and public self-consciousness influence the purchasing frequency of fashion items on the Internet indirectly through dressing style. The results implicate effective strategies for Internet shopping malls and suggestions for future study.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.130-143
• /
• 1993

Engineering ceramics have some excellent properties as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper, experiments are carried out to obtain the effect of "In-process dressing" to grind the Engineering ceramics with high efficiency. To save running time for dressing process and obtain restraint effect of diamond grain wear, "In-process dressing" system using WA stick type honing stone is proposed. Representative Engineering ceramics, such as AI$_{2}$O$_{3}$, Si$_{3}$N$_{4}$, are ground with diamond wheel. Also bending strength test is carried out to check upward tendancy of mecahnical properties as the result of machining defact restraint through the grinding machining method using "In-process dressing" process. Some results obtained in this study provide useful information to attain the high efficiency grinding and the high mechanical properties of Engineering ceramics.rties of Engineering ceramics.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.178-189
• /
• 1993

Engineering ceramics have some excellent properties as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper experiments are carried out to obtain the effect of "In-process dressing" to grind the Engineering ceramics with high efficiency. To save running time for dressing process and obtain restraint effect of diamond grain wear, "In-process dressing" system usint WA stick type honing stone is proposed. Representative High Strength Engineering ceramics A1$_{2}$O$_{3}$ and Si$_{3}$N$_{4}$are ground with diamond wheel. Also bending strengrh test is carried out to check upward tendancy of mecahnical properties as the result of machining defact restraint through the grinding maching method using "In-process dressing" process. Some results obtained in this study provide useful information to attain the high efficency grinding and the high mechanical properties of Engineering ceramics.rties of Engineering ceramics.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.491-495
• /
• 2005

In partial thickness burn injuries, silver sulfadiazine cream 1%(SSD, $Silvadene^{(R)}$) is the most commonly used topical agent worldwide. But silver sulfadiazine cream 1% has no exudate absorption property. Usually after escar is removed from wound surface, $Silvadene^{(R)}$ is changed to saline wet gauze dressing to promote epithelization. $Aquacel^{(R)}$(ConvaTec, UK) is a 100% sodium carboxymethylcellulose Hydrofiber material. It absorbs exudates directly into the hydrofibers by vertical wicking which allows rapid uptake of liquid into the fibers. The absorbed exudate fluid can be distributed to the entire dressing rather than just over the wound surface, which results in larger fluid absorption capacity. From April, 2003 to July, 2004 a study was done with 40 patients who had variable partial thickness burns. $Aquacel^{(R)}$ dressing was compared in 21 cases to silver sulfadiazine cream 1% and saline wet gauze dressings in 19 cases. In the $Aquacel^{(R)}$ cases, the average healing time on the face was $5.36{\pm}1.69$ a day; on the hands was $8.46{\pm}2.15$ a day; and, on the neck was $6.0{\pm}2.0$ a day. With the $Silvadene^{(R)}$ and Saline wet gauze dressing, the average healing time on the face was $6.44{\pm}1.74$ a day; on the hands was $13.79{\pm}5.35$ a day; and, on the neck was $11.17{\pm}3.31$ a day. As a result, the $Aquacel^{(R)}$ group showed a shorter healing time compared to the $Silvadene^{(R)}$ and saline wet gauze dressing group and patients were satisfied because of less pain and improved comfort. In conclusion, $Aquacel^{(R)}$ is a better choice for partial thickness burn injuries because of shorter healing time, less pain and more confortable dressing.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.387-390
• /
• 1997

Grinding process takes a long time that grinding machine is setted properly. It is difficult for user to judge correctly the abnormal states generated in grinding process. Air grinding has to be reduced for the improvement of productivity. In addition, it is important to monitor the dressing and the grinding process so that the grinding working maintains optimal grinding conditions. In this study, the monitoring system using the acoustic emission is developed to monitor these processes continuously. This system was able to reduce the preparation as well as the machine setting time in grinding operation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.204-209
• /
• 1999

The dressing time monitoring in cylindrical grinding is very important with respect to machining efficiency. Therefore, the purpose of this paper is to determine the wheel life by monitoring behavior of grinding power for Wa, 19A and GC. For this purpose, we investigated indirectly the attritious wear of grain edge, the loading of grinding wheel and the breakage of grain through the grinding power and the surface roughness under various grinding conditions. From obtained the results, the relationship between the wheel life and the average sectional chip area is examined to guide for the determination of dressing time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.119-124
• /
• 1994

Morden industrial society pursues unmanned system and automation of manufacturing rocess. Abreast with this tendensy, prodution of goods which requires advaned accuracy is increasing as well. According to this, the work sensing time of dressing by monitoring and diagnosis the condition of grinding, which is the representative way in accurate manufacturing, is a important work to prevent serios damages which affect grinding process or products by wearing wheel. Computer vision system is composed, so that grind wheel wurface was acquired by CCD camera and the change of cutting is composed. Then we used autometic threshoding technique from histogram as a way of deviding cutting edge which is used in manufacturing from the other parts. As a result, we are trying to approach unmanned system and sutomation by deciding more accurate time of dressing and by visualizing behavior of grinding wheel by marking use of computer vision.