• 제목/요약/키워드: Drawn model

검색결과 884건 처리시간 0.026초

우리나라 Holstein 경산우의 분만간격과 비유곡선모수와의 상관관계 (Correlation between Calving Interval and Lactation Curve Parameters in Korean Holstein Cows)

  • 원정일;당창권;임석기;임현주;윤호백
    • 농업생명과학연구
    • /
    • 제50권5호
    • /
    • pp.173-182
    • /
    • 2016
  • 본 연구는 분만간격과 비유곡선 모수들 간의 상관관계를 규명하기 위하여 농협중앙회 젖소개량사업소에서 진행하고 있는 유우군 능력검정사업에 참여하고 있는 홀스타인 젖소로부터 조사한 착유기록 36,505개를 분석하였는데, 분석에 이용된 착유기록은 모두 2011년부터 2013년 사이에 분만한 경산우로부터 조사하였다. 비유곡선 모수는 Wood 모형을 적용하여, SAS 9.2 NLIN Procedure를 이용해 추정하였다. 분만년도-계절(봄, 여름, 가을, 겨울)효과와 산차(2, 3, 4산차)의 효과를 고정효과로 한 다형질 일반선형모형으로 SAS(GLM procedure)를 이용하였다. 분만간격, 305일 유량, 비유곡선모수(A, b, c), 비유지속성, Peak 일시 및 Peak기 유량에 대해 분만년도-계절과 산차의 효과는 모두 유의적으로 나타났다(p<0.05). Wood 모형으로 추정한 비유곡선 함수는 2, 3 및 4산차에 대해 각각 yt=24.66t0.175e-0.00302t, yt=24.69t0.192e-0.00334t 및 yt=24.22t0.200e-0.00341t으로 추정되었다. 분만간격과 305일 유량, 모수값 A, b, c, 비유지속성, Peak 일시 및 Peak기 유량과의 표현형상관(잔차상관)은 각각 0.093, -0.014, 0.028, -0.046, 0.099, 0.085 및 0.052으로 나타났다. 분만간격이 길어지면 비유곡선의 상향경사도, 비유지속성, Peak 일시, Peak기 유량은 증가하고, 비유곡선의 하향경사도는 감소하여, 305일 유량은 증가할 것으로 판단된다.

수종의 조직 양화재의 침수시간과 분액비에 따른 표면 거칠기의 변화 (Changes of the surface roughness depending on immersion time and powder/liquid ratio of various tissue conditioners)

  • 김경수;문홍석;심준성;정문규
    • 대한치과보철학회지
    • /
    • 제47권2호
    • /
    • pp.108-118
    • /
    • 2009
  • 연구목적: 1961년 Chase에 의해 처음 소개된 기능 인상법(functional impression technique)은 기존 의치에 이장된 조직 양화재(tissue conditioner)를 이용하여 실제 기능 운동 하에서 동적인 지지 조직의 인상과 기능적이며 생리적인 의치 변연부의 형태와 길이를 기록하는 술식이다. 조직 양화재가 기능 인상법의 재료로 사용되기 위해서는 체적 안정성, 미세부 재현성, 흐름성 등의 특성과 함께 치과용 석고와의 적합성(compatibility)을 고려하여야 한다. 하지만 기능 인상법 재료로 조직 양화재를 사용할 경우 구강내 환경 속에서 시간이 지남에 따라 석고 표면 거칠기에는 어떠한 영향을 미칠지 또한 그에 따라 석고 표면의 변화를 고려하여 어느 정도 기간 동안 구강 내에 유지하는 것이 좋을지에 대한 연구는 거의 없는 상황이다. 이에 본 연구는 조직 양화재를 기능 인상법의 재료로서 사용할 경우, 조직 양화재의 종류와 분액비, 침수시간이 치과용 석고 표면 거칠기에 어떠한 영향을 주는지 알아보고자 하였다. 연구 재료 및 방법: 임상적으로 많이 쓰이는 3종의 조직 양화재(Coe-Comfort, Visco-Gel, Soft-Liner)로 제조사에서 추천하는 분액비(P/L ratio)를 기준으로 표준 분액비에 따라 혼합한 군(R), 분말의 양을 20% 많이 혼합한 군(M), 분말의 양을 20% 적게 혼합한 군(L)으로 나누어 조직 양화재를 혼합하여 직경 20 mm, 두께 2 mm의 시편을 제작하였다. 각 조직 양화재 시편들을 다시 인공 타액 속의 침수시간(0시간, 1일, 3일, 5일, 7일)에 따라 5개의 군으로 나눈 뒤 인공 타액에 완전히 담구어 $37^{\circ}C$에서 보관하였다. 정해진 침수시간이 경과한 시편을 꺼내서 초경석고를 부어 석고 시편을 제작한 뒤 조직 양화재와 접해있던 석고 시편 표면의 거칠기를 접촉식 표면 조도기(Surfcoder SEF-30D, Kosaka laboratory Ltd., Tokyo, Japan)로 측정하여 다음과 같은 연구 결과를 얻었다. 결과 및 결론: 1. 조직 양화재로 부터 만들어진 석고 모형의 표면 거칠기에 주된 영향을 미치는 요인은 기능 인상을 채득하기 위해 구강 내에 조직 양화재를 위치시키는 기간이었고, 그 외에 조직 양화재의 종류와 분액비도 통계학적으로 유의한 영향을 미치는 요인이었다. 2. 3가지 P/L ratio 실험 조건 모두에서 Visco-Gel과 Soft-Liner 간에는 석고 모형의 표면 거칠기값이 침수시간이 변함에 따라 통계학적으로 유의성 있는 차이를 보이지 않았지만, Coe-Comfort의 경우에는 침수시간이 변함에 따라 Soft-Liner와 Visco-Gel보다 석고 모형의 표면 거칠기값이 통계학적으로 유의성 있게 더 큰 값을 보였다. 3. 3종의 실험 대상 조직 양화재 모두에서 R(recommended)와 M(more) group 간에는 석고 모형의 표면 거칠기값이 침수시간이 변함에 따라 통계학적으로 유의성 있는 차이를 보이지 않았지만, L(less) group의 경우에는 침수시간이 변함에 따라 R과 M group보다 석고 모형의 표면 거칠기값이 통계학적으로 유의성 있게 더 큰 값을 보였다. 이러한 연구 결과로부터 석고 모형의 표면 거칠기에는 구강 내에서의 시간이 가장 큰 영향을 나타내며, 조직 양화재의 종류와 분액비도 영향을 미칠 수 있기 때문에 술자가 기능 인상 채득 시에 적절한 구강 내 적용시간에 대해서 잘 이해하고 있고, 기능 인상에 적합한 조직 양화재를 선별할 수 있다면 조직 양화재를 이용하여 유용하게 기능 인상을 채득할 수 있을 것이다.

3차 병원에 입원한 교통사고환자의 평균 재원기간과 조기퇴원시의 수입증대효과 분석연구 (Analyses on the Mean Length of Stay of and the Income Effects due to Early Discharge of Car Accident Patients at General Hospital)

  • 유호신
    • 지역사회간호학회지
    • /
    • 제10권1호
    • /
    • pp.70-79
    • /
    • 1999
  • This study attempts to encourage the development of a rehabilitation delivery system as a substitute service for hospitalization such as a community based intermediate facility or home health care. We need substitute services for hospitalization to curtail the length of stay for inpatients due to car accidents. It focused on developing an estimation for early discharge based on a detailed statement of treatment from medical records of 109 inpatients who were hospitalized at General Hospital in 1997. This study has three specific purposes: First, to find the mean length of stay and mean medical expenditure. Second, to estimate the mean of early discharge from the mean length of stay. Third, to analyize the income effect per bed from early discharge. In order to analyze the length of stay and medical expenditure of inpatients the author conducted a micro and macro-analysis with medical expenditure records. To estimate the early discharge we examined with a group of 4 experts decreases in the amount of treatment after surgery, in treatments, in tests, in drug methods. We also looked their vital signs, the start of ROM exercise, the time removel, a patient's visitations, and possible stable conditions. In addition to identifing the income effect due to an early discharge, the data was analyzed by an SPSS-PC for windows and Excell program with a regression analysis model. The research findings are as follows: First, the mean length of stay was 47.56 days, but the mean length of stay due to early discharge was 32.26 days. The estimation of early discharge days was shown to depend on the length of stay. The longer the length of stay, the longer the length before discharge. For example, if the patient stayed under 14 days the mean length of stay was 7.09 while an early discharge was 6.39, whereas if the mean length of stay was 155.73, the early discharge time was 107.43. The mean medical expenditure per day of car accident patients was found to be 169,085 Won, whereas the mean medical expenditure per day was shown to be in a negative linear form according to the length of stay. That is the mean expenditure for under 14 days of stay was 303,015 Won and the period of the hospitalization of 15 days to 29 days was 170,338 Won and those of 30 days to 59 days was 113,333 Won. The estimation of the income effect due to being discharged 16 days was around 2,350,000 Won with a regression analysis model. However, this does not show the real benefits from an early discharge, but only the income increasing amount without considering prime medical cost at a general hospital. Therefore, we need further analysis on cost containments and benefits incending turn over rates and medical prime costs. From these research findings, the following suggestions have been drawn, we need to develop strategies on a rehabilitation delivery system focused on consumers for the 21st century. Varions intermediate facilities and home health care should be developed in the community as a substitute for shortening the length of stay in hospitals. In home health care cases, patients who want rehabilitation services as a substitute for hospitalization in cooperation with private health insurance companies might be available immediately.

  • PDF

PET/CT 검사에서 SharpIR 재구성 방법의 평가 (Evaluation of SharpIR Reconstruction Method in PET/CT)

  • 김정열;강천구;박훈희;임한상;이창호
    • 핵의학기술
    • /
    • 제16권1호
    • /
    • pp.12-16
    • /
    • 2012
  • 서론: 종래의 PET 영상 재구성에 있어서 FBP 등에 비해 3차원 반복 재구성 방법이 일반적으로 대체하고 있으며, 이것은 검출기 기하학적 특성과 완벽한 3차원 산란 평가 및 저잡음 randoms 평가 등의 더 진보된 재구성 알고리즘을 제공하고 활용되고 있다. 최근에 SharpIR알고리즘은 3차원 반복 재구성 알고리즘으로 PET 검출기 응답 정보를 통합하여 PET 영상의 잡음을 효과적으로 감소시켜 대조도를 향상 시키기 위한 것으로 알려지고 있다. 본 연구에서는 새로운 반복 시스템 모델인 SharpIR에 대한 성능 평가와 임상에서의 적용 가능성에 대해 알아보고자 한다. 실험재료 및 방법: 검출기 응답에 대한 분해능을 측정하기 위해 유리관(내경 1.1 mm, 두께 0.2 mm)에 $^{18}F$-FDG (250 MBq/mL)을 주입하여 축 방향 시야의 중심과 축 방향으로 5, 10, 15, 20 cm만큼 떨어진 지점에서 획득하였고 VUE point HD와 VUE point HD-SharpIR로 재구성하여 각각의 영상에서 반치폭을 구하였다. 또한 영상품질평가로 image quality phantom (NU2-2001)을 이용하여, 여러 개의 각각 다른 반지름을 가지는 원형구에 cold (직경 28, 37 mm)와 ho (직경 10, 13, 17, 22 mm)부분을 나누어 배경잡음을 주고 영상의 대조도를 평가하였다. 획득된 영상은 VUE point HD와 VUE point HD-SharpIR로 재구성을 하였다. 임상실험에서는 전신검사를 시행받은 환자 중 병소가 있는 환자 10명을 대상으로 VUE point HD와 VUE point HD-SharpIR로 재구성하였다. 이때 iterations을 1~10까지 변경하여 병소 부위와 간 부위에 관심영역을 설정하여 대조도를 평가하였다. 결과: VUE point HD로 재구성한 영상에서는 시야 중심으로부터 축방향 거리 증가와 함께 반치폭이 함께 증가하였지만 VUE point HD-SharpIR로 재구성한 영상에서는 거리가 증가하여도 일정한 반치폭을 나타냈다. 대조도는 팬텀 실험과 임상 실험에서 VUE point HD-SharpIR이 VUE point HD보다 대조도의 향상을 나타냈다. 결론: 검출기 시스템 응답에 대한 더 많은 정보를 포함시킴으로써 SharpIR 알고리즘은 VUE point HD에서 사용되는 기본 모델의 정확성을 향상시켰다. 또한 SharpIR은 VUE point HD보다 각각의 복셀에 관련된 더 많은 측정 위치를 가지는 시스템 모델이기 때문에 더욱 정교한 재구성 모델의 결과를 나타내기 위해 더 많은 반복이 걸린다. 결론적으로 SharpIR은 PET 영상에서 대조도를 향상시켰고 임상에서 적용할 수 있는 최적화된 재구성 조건을 알아보기 위해 종단적 연구를 통해 적용한다면 임상에서 유용하게 사용될 것이다.

  • PDF

조직의 정보 니즈와 ERP 기능과의 불일치 및 그 대응책에 대한 이해: 조직 메모리 이론을 바탕으로 (Understanding the Mismatch between ERP and Organizational Information Needs and Its Responses: A Study based on Organizational Memory Theory)

  • 정승렬;배억호
    • Asia pacific journal of information systems
    • /
    • 제22권2호
    • /
    • pp.21-38
    • /
    • 2012
  • Until recently, successful implementation of ERP systems has been a popular topic among ERP researchers, who have attempted to identify its various contributing factors. None of these efforts, however, explicitly recognize the need to identify disparities that can exist between organizational information requirements and ERP systems. Since ERP systems are in fact "packages" -that is, software programs developed by independent software vendors for sale to organizations that use them-they are designed to meet the general needs of numerous organizations, rather than the unique needs of a particular organization, as is the case with custom-developed software. By adopting standard packages, organizations can substantially reduce many of the potential implementation risks commonly associated with custom-developed software. However, it is also true that the nature of the package itself could be a risk factor as the features and functions of the ERP systems may not completely comply with a particular organization's informational requirements. In this study, based on the organizational memory mismatch perspective that was derived from organizational memory theory and cognitive dissonance theory, we define the nature of disparities, which we call "mismatches," and propose that the mismatch between organizational information requirements and ERP systems is one of the primary determinants in the successful implementation of ERP systems. Furthermore, we suggest that customization efforts as a coping strategy for mismatches can play a significant role in increasing the possibilities of success. In order to examine the contention we propose in this study, we employed a survey-based field study of ERP project team members, resulting in a total of 77 responses. The results of this study show that, as anticipated from the organizational memory mismatch perspective, the mismatch between organizational information requirements and ERP systems makes a significantly negative impact on the implementation success of ERP systems. This finding confirms our hypothesis that the more mismatch there is, the more difficult successful ERP implementation is, and thus requires more attention to be drawn to mismatch as a major failure source in ERP implementation. This study also found that as a coping strategy on mismatch, the effects of customization are significant. In other words, utilizing the appropriate customization method could lead to the implementation success of ERP systems. This is somewhat interesting because it runs counter to the argument of some literature and ERP vendors that minimized customization (or even the lack thereof) is required for successful ERP implementation. In many ERP projects, there is a tendency among ERP developers to adopt default ERP functions without any customization, adhering to the slogan of "the introduction of best practices." However, this study asserts that we cannot expect successful implementation if we don't attempt to customize ERP systems when mismatches exist. For a more detailed analysis, we identified three types of mismatches-Non-ERP, Non-Procedure, and Hybrid. Among these, only Non-ERP mismatches (a situation in which ERP systems cannot support the existing information needs that are currently fulfilled) were found to have a direct influence on the implementation of ERP systems. Neither Non-Procedure nor Hybrid mismatches were found to have significant impact in the ERP context. These findings provide meaningful insights since they could serve as the basis for discussing how the ERP implementation process should be defined and what activities should be included in the implementation process. They show that ERP developers may not want to include organizational (or business processes) changes in the implementation process, suggesting that doing so could lead to failed implementation. And in fact, this suggestion eventually turned out to be true when we found that the application of process customization led to higher possibilities of failure. From these discussions, we are convinced that Non-ERP is the only type of mismatch we need to focus on during the implementation process, implying that organizational changes must be made before, rather than during, the implementation process. Finally, this study found that among the various customization approaches, bolt-on development methods in particular seemed to have significantly positive effects. Interestingly again, this finding is not in the same line of thought as that of the vendors in the ERP industry. The vendors' recommendations are to apply as many best practices as possible, thereby resulting in the minimization of customization and utilization of bolt-on development methods. They particularly advise against changing the source code and rather recommend employing, when necessary, the method of programming additional software code using the computer language of the vendor. As previously stated, however, our study found active customization, especially bolt-on development methods, to have positive effects on ERP, and found source code changes in particular to have the most significant effects. Moreover, our study found programming additional software to be ineffective, suggesting there is much difference between ERP developers and vendors in viewpoints and strategies toward ERP customization. In summary, mismatches are inherent in the ERP implementation context and play an important role in determining its success. Considering the significance of mismatches, this study proposes a new model for successful ERP implementation, developed from the organizational memory mismatch perspective, and provides many insights by empirically confirming the model's usefulness.

  • PDF

상악 4절치의 후방견인시 나타나는 현상에 관한 유한요소법적 분석 (THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE PHENOMENON PRODUCED DURING RETRACTION OF FOUR MAXILLARY INCISORS)

  • 천옥진;김태우;서정훈
    • 대한치과교정학회지
    • /
    • 제25권5호
    • /
    • pp.525-541
    • /
    • 1995
  • 상악치열에서 제 1 소구치를 발거하고, 이 위치로 견치를 후방이동시킨 상태에서 retraction archwire를 사용하여 상악 4절치를 한 묶음으로 후방견인시켰을 때 초기에 나타나는 모든 힘 체계와 개개치아의 이동양상을 살펴보고 바람직하지 않은 치아이동을 감소시키기 위한 방안을 모색하고자 본 연구를 시행하였다. 먼저 유한요소법을 이용하여 상악 치아와 치근막의 해부학적 형태 및 생체적 특성을 컴퓨터로 재현시키고 모형화된 브라켓을 부착시킨 후, beam요소를 사용하여 5종의 retraction loop를 하나씩 부여한 다섯 가지의 탄선을 모형화하고, 브라켓과 탄선간에는 gap요소를 사용하여 모형화함으로써 전체 유한요소 모형을 완성하였다. loop의 형태, activation 의 양, gable bend와 torque의 조건에 따른 차이를 검토하기 위해, 각 조건을 변화시켜 loop를 activation시켰을 때 탄선이 발휘하는 힘과 모멘트, 치아이동의 변위를 3차원적으로 정량적 및 가시적으로 평가하고 비교, 분석한 결과 다음과 같은 결론을 얻었다. 1. tear-drop loop archwire사용시 각 치아의 근원심이동 및 설측이동이 발치공간 폐쇄에 도움이 되었으나, 바람직하지 못한 상하이동과 각 방향으로의 회전이동이 부가적으로 나타났다. 2.다섯 가지의 retraction archwire중 T-loop archwire에서 공간폐쇄에 도움이 되는 치아이동이 가장 작게 나타났으며, 각 방향으로의 회전이동 역시 가장 작게 나타났다. 3. tear-drop loop archwire에서 activation양을 증가시킴에 따라 공간폐쇄에 도움이 되는 치아이동이 점차 증가했으나, 바람직하지 못한 상하이동과 각 방향으로의 회전이동이 함께 증가했다. 4. tear-drop loop archwire에서 loop의 전후방에 gable bend부여시 전치에서 근원심방향의 치체이동에 도움이 되었으나, 모든 치아에서 상하이동과 각 방향으로의 회전이동이 함께 증가했다. 5. tear-drop loop aichwire의 절치부에 치근 설측 torque 부여시 이들 치아의 순설경사를 개선시키는 효과를 얻었으나, 그 반작용으로 견치 치관의 설측회전이 크게 증가했으며, 전치의 상하이동과 모든 치아에서 각 방향으로의 회전이동이 증가했다.

  • PDF

교정용 각형선재에 부여된 torque가 브라켓에 발생시키는 모멘트에 관한 유한요소법적 분석 (The moment generated by the torque of the orthodontic rectangular wire : Three-dimensional finite element analysis)

  • 하도원;김영석;성재현
    • 대한치과교정학회지
    • /
    • 제31권3호
    • /
    • pp.335-346
    • /
    • 2001
  • 본 연구의 목적은 교정치료의 마무리 단계에서 비람직하지 못한 순설측 경사를 가진 한 개 치아의 이동을 원할 때 브라켓 슬롯의 크기와 각형선재의 종류, 크기에 따라 부여하여야 할 적절한 임상적 torque (SWA의 각형선재에서 나머지 편평한 부분과 이동을 위해 변형시킨 부분의 단면이 이루는 각도만큼의 torque)의 양을 구하고자 하는 것이다. 임상적 torque는 play와 active torque(브라켓에 모멘트를 전달할 수 있는 torque)의 합으로 구성되는데, play는 수학적 공식을 이용하여 계산하였고 active torque는 컴퓨터를 이용한 삼차원 유한요소법으로 구하였다. 유한요소모델은 일렬로 배열된 세 개의 브라켓과 여기에 삽입된 stainless steel, TMA , NiTi 이렇게 3가지 종류의 교정용 각형선재로 구성된 다. 양쪽의 브라켓을 일정한 각도로 비틀어서 가운데 브라켓에 발생하는 모멘트를 계산하였다. 선재의 크기는 많이 사용되는 각형선재인 .016"X.022", .017"X.022", .017"X.025", .018"X.025", .019"X.025", .020"X.025". .021"X.025"의 7개로 디자인하였다. .018" 브라켓에는 .016"X.022", .017"X.022", .017"X.025" 선재를 삽입하여 실험하였고, .022" 브라켓에는 .016"X.022" 선재를 제외한 나미지 선재를 삽입하여 실험하였다. 실험으로 다음과 같은 결과를 얻었다. 1. 삽입된 브라켓 슬롯의 크기에 상관없이 같은 크기와 재질의 교정용 각형선재에 같은 active torque를 가하면 동일한 모멘트가 발생하였다. 2. 선재의 크기가 증가될 수록 동일한 active torque에 의해 발생되는 모멘트의 양은 증가하였다. 실험에 사용한 가장 굵은 선재인 .021"X.033" 선재는 동일한 재질의 가장 가는 .015"X.022" 선재에 비해 약 1.75배 더 큰 torsional stiffness를 가졌다. 3. 선재의 재질에 따라서는 stainless steel, TMA, NiTi순으로 torsional stiffness가 감소하였는데 stainless steel에 비해 TMA는 0.35배, NiTi는 0.16배였다. 4. 브라켓간 거리의 증가와 발생되는 torsional .stiffness는 반비례하였다. 브라켓간 거리의 증가에 의해 감소되는 torsional stiffness의 비율은 선재의 재질과 상관이 있었고 크기에 따라서는 큰 차이가 없었다. 5. 교정치료의 마무리 단계에서 이상적인 순설측 경사이동을 일으키는 임상적 torque의 공식과 값을 구하였다.

  • PDF

미국 위탁아동의 친권상실선고 이후 입양 결정요인에 관한 생존분석 (Timing and Risk Factors of Adoption for Legally-Free Foster Children after Having Parental Rights Terminated in the U. S.)

  • 송민경
    • 한국사회복지학
    • /
    • 제59권1호
    • /
    • pp.301-327
    • /
    • 2007
  • 본 연구의 목적은 미국에서 친권상실이 선고된 위탁아동의 입양률 추이를 살펴보고, 입양결정에 영향을 미치는 주된 요인을 규명하는 데 있다. 본 연구는 미국 위탁보호와 입양에 관한 패널데이터 FY1999-FY2002를 이용하여 1998년 10월부터 2002년 9월까지 32개 주를 추출하여 총 26,895명을 분석에 활용하였다. 사건사 분석의 Kaplan-Meier 분석과 비례적 위험회귀모형(Cox proportional hazards regression model)을 이용하여 친권상실선고 이후 소요되는 위탁기간에 따른 입양률 추이와 위험 입양배율(hazard ratios for adoption)를 산출하였다. 본 연구의 주요 결과로는 친권상실선고 이후 3개월-19개월까지 입양률이 급속히 증가하다가 20개월이 지나면서 오히려 감소추세를 보이고 있었다. 입양여부와 관련한 주요 요인으로서는 백인아동일 경우, 나이가 어릴수록, 선입양가족, 도시소재의 위탁보호일 경우, 양부모 위탁가족, 또는 인종적으로 동일한 위탁부모에 의해 위탁보호 될 경우 입양가능성이 상대적으로 높게 나타났다. 또한, 아동이 지체나 장애가 있을 경우, 신체학대나 성학대를 경험한 경우, 친부모의 양육능력부족으로 위탁보호 된 경우 상대적으로 낮은 입양가능성을 보이고 있다. 본 연구결과 친권상실 이전에 발생한 위탁보호 원인이 친권상실 이후에도 입양에 영향을 미치고 있으며, 입양촉진방안으로 친권상실선고 이후 제공된 위탁서비스 활용과 적극적 지원방안 모색의 필요성이 제기되었다. 끝으로 본 연구결과를 바탕으로 한국사회에서 요보호아동의 친권개입의 정책적 방향과 항구적 보호마련을 위한 함의와 제언을 개괄적으로 제시하였다.

  • PDF

임플란트 지대주나사의 조임회전력이 연결부 안정성에 미치는 영향에 관한 3차원 유한요소해석 연구 (Effect of Tightening Torque on Abutment-Fixture Joint Stability using 3-Dimensional Finite Element Analysis)

  • 엄태관;서승우;전계록;신정욱;정창모
    • 대한치과보철학회지
    • /
    • 제47권2호
    • /
    • pp.125-135
    • /
    • 2009
  • 연구목적: 임플란트 치료에서 흔히 발생하는 기계적인 문제점을 하나가 지대주나사의 풀림과 파절이다. 일반적으로 나사 연결의 안정성을 위해서는 지대주나사의 조임회전력에 의한 전하중을 나사의 탄성한계까지 증가시킬 필요가 있다. 그러나 저작운동에 의한 기능부하는 전하중이 가해진 지대주나사에 추가적인 인장력을 가하게 되어 나사의 풀림이나 파절의 가능성을 높인다. 이러한 풀림이나 파절을 방지하면서 동시에 최대의 결합 강도를 가지는 조임회전력을 찾는 연구가 필요하다. 본 연구는 지대주나사의 조임회전력이 임플란트-지대주 연결부 안정성에 미치는 영향을 3차원 유한요소 분석을 통하여 확인하고자했다. 연구 재료 및 방법: External butt joint를 가진 임플란트를 기반으로 3차원 유한요소 해석모형을 설계하였다. 조임회전력에 따른 지대주나사의 전하중을 이론치, 실험치 및 해석치를 비교하여 해석모형을 검증하였다. 검증한 해석모형에서 대해 조임회전력을 10 Ncm, 20 Ncm, 30 Ncm, 그리고 40 Ncm로 각각 적용하고 지대주에 30도 경사지게 250 N의 외부하중을 가하여 유산요소 해석을 실시하였다. 그 결과를 통해 지대주나사의 최대 등가응력을 계산하고 고정체와 지대주 연결부의 응력분포 및 이개거리(gap distance)를 산출하였다. 결과 및 결론: 본 연구조건 하에서 다음과 같은 결과를 얻었다. 1. 전하중은 조임회전력이 클수록 증가하였다. 2. 조임회전력 적용 후 최대 등가응력은 지대주나사 경부에서 발생하였으며, 나사산 체결부에서는 주로 경부쪽 네 개의 나사산에 응력이 집중되었다. 3. 외부하중을 가했을 때에도 조임회전력을 적용했을 때와 동일하게 최대 등가응력은 주로 지대주나사 경부에서 발생하였으나, 10 Ncm의 조임회전력을 적용한 경우에서는 지대주나사 두부밑면에서 발생하였다. 4. 외부하중을 가했을 때 10 Ncm와 20 Ncm의 조임회전력을 적용한 경우에서는 연결부 이개(joint opening) 현상이 관찰 되었다. 5. 조임회전력이 40 Ncm인 경우에는 경사하중에 의해 지대주나사의 경부에 발생하는 최대등가응력이 나사의 소재인 티타늄 합금의 허용응력을 초과하였다. 이상의 결과로 볼 때, 조임회전력은 고정체와 지대주 연결부의 안정성에 영향을 미치는 것이 확인되었다. 임플란트 지대주나사는 임상에서 발생하는 기능 하중을 고려하여 고정체와 지대주 연결의 안정성을 유지할 수 있는 적정 조임회전력의 크기가 제안되어야 한다.

국제협력사업 추진을 위한 해사안전기술 평가 연구 (Evaluation of Maritime Safety Technology for Official Development Assistance (ODA))

  • 오세웅;전태병;이문진;서상현;조동오
    • 해양환경안전학회지
    • /
    • 제16권1호
    • /
    • pp.81-91
    • /
    • 2010
  • 국제해사기구(IMO)와 세계 해운계에서는 해양환경 보호 및 해상안전 확보를 위해 각종 국제협약을 시행하고 있으나 개발도상국에서는 이를 이행하지 못해 해양사고의 주요 요인이 되고 있다. IMO A그룹 이사국으로 부상한 우리나라는 해사안전기술 이전실적이 마마하여 해사안전기술 분야의 국제협력 사업 발굴 및 추진이 요구되고 있다. 국제협력 사업을 추진하기 위해서는 해사안전 분야의 중요도가 높고 개발도상국에서 필요도가 높은 기술을 선정하여 추진하여야 하는 등 선택과 집중이 요구된다. 따라서 해사안전기술의 우선순위 도출이 필요하며 이를 위해서는 해사안전기술의 평가요인을 도출하고 그 요인에 따라 대상 해사안전기술을 평가하여 우선순위를 결정하여야 한다. 이때 평가요인 간의 중요도를 나타내는 중요 가중치가 평가요인마다 상이하며, 요인간에 종속성이 발생하므로 이를 고려하여야 한다. 본 연구에서는 해사안전기술 평가요인으로 해사안전기술성숙도, 국제협력사업추진가능성, 해사안전기술중요도의 세 그룹으로 구분하고 각 그룹별로 세부 요인을 도출하였다. 또한 평가요인 간의 중요 가중치와 상관 가중치를 고려하기 위해 Fuzzy AHP 기법과 극한확률 이론을 사용한 평가모델을 개발하였다. 본 평가모델의 적용을 위해 해양안전정보 분야에 9개의 해사안전 기술을 선정하고 각 기술의 평가 점수를 계산하였다. 적용 결과 전자해도관련기술이 0.0139로 가장 우선순위가 높았으며 선박모니터링기술과 유류유출확산예측및대응기술이 각각 0.0133, 0.0132로 계산되었다.