• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.261-264
• /
• 2000

Two hull forms of 2, 500 TEU Container Vessel, designed by Daedong Shipbuilding CO., LTD. were tested at the Circulating Water Channel of Chosun University for the evaluation of resistance performance. The test results of resistance, wave profile measurement and trim-sinkage measurement are compared in the form of diagrams and figures, and the results are discussed. A conclusion is drawn that the performance of modified form (model number : CU-201F2A2) is improved about 8% resistance performance at the design speed compare with original form (model number : CU-201F1A1).

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.1
• /
• pp.55-74
• /
• 2005

Bankruptcy prediction has drawn a lot of research interests in previous literature, and recent studies have shown that machine learning techniques achieved better performance than traditional statistical ones. This paper employs a relatively new machine learning technique, support vector machines (SVMs). to bankruptcy prediction problem in an attempt to suggest a new model with better explanatory power and stability. To serve this purpose, we use grid search technique using 5-fold cross-validation to find out the optimal values of the parameters of kernel function of SVM. In addition, to evaluate the prediction accuracy of SVM. we compare its performance with multiple discriminant analysis (MDA), logistic regression analysis (Logit), and three-layer fully connected back-propagation neural networks (BPNs). The experiment results show that SVM outperforms the other methods.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.24-30
• /
• 2005

For a reciprocating compressor of household refrigerators, a direct analogy between the pipe flow network and the electric circuit network has been utilized to set up a mathematical model for oil supply system. Individual lubrication elements of the oil supply system, such as propeller- installed oil cap, oil galleries, radial oil feeding holes, spiral oil grooves, and various sliding surfaces have been analogized by equivalent electric elements, and these have been combined together to form an electric circuit corresponding to the whole oil supply system. By solving the closed network equations of the model, oil flow rates at various lubrication elements could be obtained. Total amount of the oil flow rate drawn into the shaft has been measured and compared reasonably well with the prediction of the numerical simulation.

• Transactions of Materials Processing
• /
• v.22 no.6
• /
• pp.310-316
• /
• 2013

Recently, numerical predictions of surface deflection based on curvature analysis have been developed. In the current study, a measure of surface deflection is proposed as the maximum variation of curvature difference between the panel and the tool in order to account for surfaces that have high curvature. The current study focused on the assessment of accuracy for the surface deflection prediction with the consideration of planar anisotropy. As an example, a shallow rectangular drawn part with rectangular embossing was considered. In terms of the proposed surface deflection measure, the maximum variation of curvature difference, the prediction with a planar anisotropic model shows better correspondence with experiment than the one using a normal anisotropic model.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.22 no.3
• /
• pp.179-199
• /
• 2018

The paper explores a tri-trophic food chain model with density dependent mortality of intermediate predator. To analyze this aspect, we have worked out the local stability of different equilibrium points. We have also derived the conditions for global stability of interior equilibrium point and conditions for persistence of model system. To observe the global behaviour of the system, we performed extensive numerical simulations. Our simulation results reveal that chaotic dynamics is produced for increasing value of half-saturation constant. We have also observed trajectory motions around different equilibrium points. It is noticed that chaotic dynamics has been controlled by increasing value of density dependent mortality parameter. So, we conclude that the density dependent mortality parameter can be used to control chaotic dynamics. We also applied basic tools of nonlinear dynamics such as Poincare section and Lyapunov exponent to investigate chaotic behaviour of the system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.1-4
• /
• 2005

This research is to present experimental materials model of high strength concrete for prediction of fire safety of structural members based on physical properties of materials during heating up to 800$^{circ}C$. The following conclusions are drawn from this study. First of all, between 100 to 200 $^{circ}C$, the physical models of concrete such as specific heat and thermal conductivity, show visible degradation, regardless of concrete strength. Second, between 300 to 600$^{circ}C$, the physical models of the 29MPa and 49MPa concrete show degradation continually at these temperatures. Finally, beyond 600$^{circ}C$, the physical models of 49MPa strength concrete show larger degradation than 29MPa strength concrete due to rise of pore pressure and melting of the interface between aggregate and cement paste.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.2
• /
• pp.188-195
• /
• 2005

After making the surgical treatment plan, the surgical movements are duplicated in the model surgery. During this procedure, reference points and lines are drawn on the base of the models over the dental arch, and sawcuts are made according to these marked osteotomy lines. This method requires more accuracy for better postsurgical results in that the surgical splint which enables the surgeon to position the jaws intraoperatively is made from the casts as repositioned by the model surgery, and finally it will define the postsurgical results. This technique, however, has been found to be inexact, especially when the jaws are moved in several dimensions simultaneously. To overcome this, different methods have been developed for an accurate repositioning of the jaws as planned. A new appliance, Surgical Jaw Relator, was devised by the author for the simple 3-dimensional relocation of the upper and lower models, resulting in the easy construction of the splints such as centric relation splint, intermediate and final splint. This article describes an introduction and a clinical application of this appliance.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.86-91
• /
• 2006

In this parer, we present the bubble forming and motion in the micro channel by using the two-dimensional numerical computation and experiment. In the numerical computation, The Lattice Boltzmann method(LBM) and free-energy model is used to treat the interfacial force and deformation of binary fluid system, drawn in to a micro channel and a numerical simulation is carried out by using the parallel computation method. The urn in this investigation is to examine the applicability of LBM to numerical analysis and experimental method of binary fluid separation and motion in the micro channel.

• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.963-975
• /
• 2017

Improvement of soft clay deposit by preloading with vertical drains is one of the most popular techniques followed worldwide. These drains accelerate the rate of consolidation by shortening the drainage path. Although the analytical and numerical solutions available are mostly based on equal strain hypothesis, the adoption of free strain analysis is more realistic because of the flexible nature of the imposed surcharge loading, especially for the embankment loading used for transport infrastructure. In this paper, a numerical model has been developed based on free strain hypothesis for understanding the behaviour of soft ground improvement by vertical drain with preloading. The unit cell analogy is used and the effect of smear has been incorporated. The model has been validated by comparing with available field test results and thereafter, a hypothetical case study is done using the available field data for soft clay deposit existing in the eastern part of Australia and important conclusions are drawn therefrom.

• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.573-580
• /
• 2010

The earlier KANSEI evaluation had to choose not to overlap the opposite meaning of the words, had to choose that some figures are shown step by step and had to choose be prepared things in advance. However, The Study shows a method which visualizes the imprecise evaluations of human without choosing evaluation items which are not prepared figures. The program is used the way which is entered by hand-drawing that the subjects use the way to enter their subjective feelings about the evaluations presented by using the mouse or the graphics tablet. It is possible to express imprecise things about evaluations and the method of drawing is free. The program provides that we can express our thinking by drawing and there are a few limits and the prescribed standard. The area ratio of each circle is expressed as a pie chart and the area of circle what is drawn which is counted automatically at the same time. These things are possible not only to modify a transparency, a thickness of a line, a color and the area of circle what is drawn, but also to adjust the area of circle. The conceptual model is visualized that expresses something by hand-drawing such as a circle. The conceptual model has wide range of applications such as a personnel evaluation, a suffering evaluation and product evaluation. The program currently has been testing the effective of the program's possibilities which is used with the personnel appraisal tool of the nurses themselves who work in nurse support department where the St. Marianna University School of Medicine Hospital is. And also the program is proceeding with development to visualize the conceptual model by dynamic interfaces effectively and the program is applied such as KJ method and a program is used to express the kind of the patient's pain and its level.