• 소성∙가공
• /
• 제13권4호
• /
• pp.307-318
• /
• 2004

Rectangular drawn case with extreme aspect ratio is widely used for electrical parts such as a lithium-ion battery container, semi-conductor case and so on. Additionally, from the recent trend towards miniaturization of the multi-functional mobile device, demands for rectangular case with the narrow width are increased. In this study, numerical and experimental approaches for the multi-stage deep drawing process have been carried out. Based on the research results of the width of 5.95mm model, finite element analysis for storage case of rectangular cup type was verified to the width of 4.95mm. Also, a series of manufacturing experiments for rectangular case is conducted and the deformed configuration of the rectangular drawn case are investigated by comparing with the results of the numerical analysis. And the modification of the initial blank is performed to minimize the trimmed material amount. By the application of the modified blank, the sound shape of the deformed parts is improved.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.191-194
• /
• 2006

Recently the quality improvement of the steel cord product is demanded by the tire market. After wire drawing process, produced residual stresses have a harmful effect on the durability of the wire and become the cause which decreases the quality of the product. Therefore, to improve the quality of the steel cord product, the research regarding the method of residual stress relaxation is necessary. To evaluate the quality of the drawn wire, it is important to measure the residual stress, because the residual stress decides a variety of the quality level which is demanded in the drawn wire. This study proposed a residual stress relaxation method in the drawn wire using FE analysis. The validity of the analysis results was verified by nanoindentation test.

• 대한기계학회논문집
• /
• 제15권5호
• /
• pp.1407-1416
• /
• 1991

본 연구에서는 Liu의 수식화를 바탕으로 가공 경화성을 고려하여 수식화를 재 구성하고, 유한요소 프로그램을 개발하여 평면 변형 인발문제를 극한 해석함으로써, 성형에 필요한 한계 하중 및 최적 속도장을 직접적으로 구하였다.수렴되어진 최적 속도장으로 각 요송에서의 변형률 속도, 변형률 및 격자 변형등을 수치적으로 계산함 으로써 가공에 따른 변형 특성도 파악하였다. 한계 하중은 항공기 구조용 소재인 알 루미늄 6061 재료를 이용하여 판재 인발 실험을 행함으로써 얻은 결과치와 비교 검토 하였으며, 유동 특성을 관찰하기 위하여 격자 왜곡(grid distortion) 실험을 하여 얻 은 변형 패턴과 수치 계산에서 구한 격자변형 패턴을 상호 비교하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.418-422
• /
• 2005

In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire has been investigated. Test pieces were fabricated using die series with different mean and final reduction ratio. Surface residual stresses in the axial direction were measured by X-ray diffraction, Broker's 2-dimensional GADDS system. Results were compared with stress profiles which were calculated by 3D and 2D finite element simulation, Hibbitt's ABAQUS 6.4 program in Finite Element Analysis. By means of FEA method, optimal die shape considering delta-parameter were induced and applied in order to determine die sequence designs. Balance of the drawing stresses was also introduced to optimize die sequence.

• 소성∙가공
• /
• 제15권2호
• /
• pp.153-157
• /
• 2006

In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire have been investigated. Test pieces were fabricated using die series with different mean and final reduction ratios. Surface residual stresses in the axial direction were measured by X-ray diffraction, Bruker's 2-dimensional GADDS system. The results were compared with stress profiles that were calculated by 3D and 2D finite element simulations, ABAQUS 6.4 program in finite element analysis(FEA). By means of the FEA method, optimal die shape considering delta-parameter were induced and applied in order to determine die sequence designs. Balance of the drawing stresses was also introduced to optimize die sequence.

• 한국조경학회지
• /
• 제22권1호
• /
• pp.111-119
• /
• 1994

Until now, Many studies on the traditional landscape architecture were approached to the interpretation of meanings and symbolism in terms of the traditional ideology and the view of nature. The purpose of this study was to research the principle of form included in the space planning by the analysis of the drawing figure. The principes of figure were presented in the space planning as the field of art. In the pavillion and square pond, drawing figure, based on the principle of simple proportions, shall be assured the value of being as a role of functions for planning first of all. Such principles of the functional aspect are in hormony and balance by proportion and thus a visual and structural aesthetic will be abled to refer.

• 한국기계기술학회지
• /
• 제13권1호
• /
• pp.89-94
• /
• 2011

The swivel joint is an important part in hydraulic machine. The analysis on the material was made using the EDAX method to localize the swivel joint. Also, the modeling and design drawing were finalized with application of 3 dimensional measurement and structure analysis. The prototype product based on design drawing was made with cutting and grinding process. No abnormalities were found in the prototype product through the durability test and measurement. The localized swivel joint with light weight, price reduction and diversification was developed in this study.

• 패션비즈니스
• /
• 제9권3호
• /
• pp.64-87
• /
• 2005

The purpose at this study is to develop the appropriate bodice model for Chinese women in order to contribute to the improvement of fitness at clothing products that are exported to China. The sample group was the subject of 149 persons with the standard body shape at 19-24 years old women who reside in Beijing and Shanghai, China. The data analysis is processed for statistics using SPSSWIN 10.0 PROGRAM, and the used analysis methods are technical statistics analysis, factor analysis, group analysis, and one-way ANOVA. The outcome of this study is summarized as follows. 1. Prior to develop the tight-fitting shape of bodice model, the body classification approach by the posture and type of bending and stretching is selected to use 6 index items, and the body types are classified into bent body, right body, and pull-back body. 2. The average body size of standard body shape had 3 times of wearing experiment based on the tight-fitting shape of ESMOD bodice block drawing, and the system was corrected and supplemented to present the final bodice block drawing. 3. Comparisons have been made based on the center front line, center back line and chest circumference for each of existing bodice block for Chinese women, existing bodice block for Korean women and the combination of the bodice block under this study.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.37-44
• /
• 2001

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.165-172
• /
• 1994