• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.27-36
• /
• 2004

Contemporary objectives for steel rod rolling processing are increasingly complex and often contrasting i.e. obtaining a desired product with optimum combination of properties such as strength, toughness and formability at lower cost. Low-alloy steel rods have been produced with several heat treatments for drawing and forging processes at room temperature. In order to reduce these heat treatments much of the researches concerning of high temperature mechanical behavior of steel rods have been conducted at wire rod mill of POSCO. In this present work, optimizations of rolling temperature and cooling rate for JS-SCM435 are performed to eliminate softening heat treatment(Low Temperature Annealing) for drawing process. The results from the optimization changed the microstructure of rods after rod rolling from Bainite with high tensile strength of 1000Mpa to Pearlite and Ferrite with appropriate strength of 750Mpa that is equivalent tensile strength after softening heat treatment.

• 한국전자통신학회논문지
• /
• 제14권2호
• /
• pp.433-438
• /
• 2019

본 논문에서는 기계 서비스 부품 도면에서 숫자를 인식하기 위하여 입력 영상에 대한 전처리와 딥러닝 모델을 제안한다. 서비스 부품 도면의 숫자를 인식하는데 있는 지시선과 도형에 의한 오검출 또는 오인식을 개선하기 위하여 수학적 형태학 필터링 전처리를 한다. 숫자 인식을 위하여 VGG-16 모델을 축소 변형한 7 개의 계층을 가지는 VGG 모델을 적용함으로써 인식 성능을 개선한다. 서비스 부품 도면의 숫자 인식 실험 결과, 제안하는 방법이 인식률 95.57%, 정확도는 92.82%로 종래의 방법에 현저히 개선된 결과를 얻었다.

• 대한건축학회논문집:계획계
• /
• 제34권2호
• /
• pp.59-66
• /
• 2018

The purpose of this study is to investigate the method on improving the frequency of use and satisfaction rate of the community facilities and to evaluate relation between improving the frequency of use and satisfaction rate of the community facilities and improving the sense of community in apartments. The research subjects of this study is the four public lease apartments which is built around same period with same design guide. The survey method is a questionnaire survey, a experimental study, focus group interview, an analysing drawing. The result of study is as follows. The first, the frequency of use and satisfaction rate have been effected by the operation management system as well as the physical circumstance. The second, The frequency of use and satisfaction rate of the community facilities have had positive correlation with sense of community. The third, multimedia room and conference room with low usability need to change a multipurpose space such as cafe, classroom for learning on artistic topic with high demand from occupant. Finally, a mindset shift is required for architects to inspire community facilities as an important mediated space improving the sense of community by suggesting spaces for leisure and hobby activities.

• 한국결정성장학회지
• /
• 제11권5호
• /
• pp.197-202
• /
• 2001

여러 조건에서 제조된 poly(ethylene terephthalate) 필름 시편들로부터 열처리 및 냉연신 조건이 시편의 물성에 미치는 영향을 조사하였다. 상온에서 만능시험기을 사용하여 미열처리 및 열처리된 시편들을 0.5에서 500 mm/min의 cross-head 속도로 단계적 연신을 행한 결과, 약 50, 72 및 $129^{\circ}C$에서 열처리된 시편들의 응력-변형 곡선에서는 응력 진동이 발생되지만, 약 $83^{\circ}C$에서 30분 동안 열처리된 시편의 응력-변형 곡선에서는 응력 진동이 발생되지 않음을 알 수 있었다. 시차 주사 열량기를 사용하여 $10^{\circ}C$/min의 승온 속도에서 열분석을 행하였고, 시편들의 유리전이온도, 결정화 피크, 용융 잠열, 결정화도를 측정하였다. 1 Hz의 주파수대에서 $1.5^{\circ}C$/min의 승온 속도로 multiple-function internal friction pendulum으로 시편들의 동적 기계분석도 수행하였으며, 미열처리, 열처리 및 연신 시편들의 순서대로 탄성계수 값이 증가함을 알 수 있었다.

• 토지주택연구
• /
• 제8권4호
• /
• pp.257-266
• /
• 2017

LH has been using ultra high strength reinforcing bars (SD500 and SD600), since 2011. Such a change requires an adjustment of the old extra rates of bar splice to reflect use of ultra high strength reinforcing bars, as these rates had been set based on SD400 bars. It is particularly difficult to calculate precisely rebar lap-splice locations for large areas, such as those in apartment buildings. This research aims to adjust the extra rates of bar splice to reflect a reasonable rate; the rebar lap-splice length is not an exact estimation, but instead, an extra rates of bar splice is set and the rebar lap-splice length is increased by 2% (D 10) - 7% (025) depending on the bar size. The subjects of this study are LH apartments undergoing frame construction. We studied the quantity estimations from the design drawings, and analyzed the settlement quantities of construction field. The results of the study revealed that, when each of the quantities are analyzed, consider adjusting the extra rates of bar splice of some rebar to 1% - 3.5%. This was caused by an overuse of reinforcing bars in onsite construction and the use of supporting bars that have not been reflected in the documents, among other reasons. Based on the results of our study, an improvement plan for the current extra rates of bar splice seems to be necessary, cutting or raising the rate depending on the analysis of the data. Through this study, we expect to contribute to the calculation of reasonable construction costs, improvements in the quality of rebar work, and improvements in the capacity of design techniques for apartment buildings.

• 한국융합학회논문지
• /
• 제10권5호
• /
• pp.85-94
• /
• 2019

본 연구는 체간안정화 운동인 복부 드로잉-인 기법을 융합한 가슴압박이 요통예방과 가슴압박 질에 미치는 영향을 분석하기 위해 119구급대원(응급구조사) 15명을 대상으로 동작분석, 근전도, 가슴압박 질을 분석하였다. 자료는 SPSS 21.0으로 정규분포(Kolmogorov-Smirnov 및 Shapiro-Wilk 검정)을 실시하였고 가슴압박 형태에 따른 전 후 대응표본 T 검정(paired T-test), 측정시점 차이분석은 일원배치 분산분석(one-way ANOVA), 사후검증은 LSD를 활용하였다. 연구결과 복부 드로잉-인 상태로 가슴압박을 하면 근활성도 및 가슴압박 성공률에서 유의한 차이를 보였다. 따라서 향후 구급대원의 요통을 예방하면서 가슴압박 성공률도 높일 수 있는 심폐소생술 교육에 대한 연구가 필요하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.546-551
• /
• 1997

In sheet metal forming, since the surface area of workpiece is apparently larger than the volume of it, the surface condition of the sheet metal is much varied. The formability of sheet metal is decided by the forming limit and the macroscopic suface defect as like fracture and wrinkle, and microscopic asponent, The factors affected in forming limit are stain herdening exponent, strain-rate scnsitivity exponent, anisotropic coefficient. The increasing of surface roughness is decresed the forming limit curve. It is known that the greater plastic deformation the more surface roughness by Kienzle, Osadaka. The purpose of this study is to investigate the influences of surface roughness in a uniaxial tension and the traperzoidal-shaped box drawing.

• 경영과학
• /
• 제34권2호
• /
• pp.57-66
• /
• 2017

The purpose of this study is to analyze the multidimensional productivity of the shipbuilding performance and to explain the role of different factors, such as man-hour, dock period, number of building block, launching process rate, automatic welding percent, and drawing fault rate which are important production-related variables in most shipbuilding companies. The shipbuilding productivity is obtained using Data Envelopment Analysis (DEA) approach. Then, a Tobit model is considered to measure the influence of different factors on the measured productivity. The results reveal that this productivity measure can substitute a representative shipbuilding productivity index (CGT/man-hour) in shipbuilding industries. Also, this multidimensional productivity analysis using DEA and Tobit reveals complex relationships between production-related variables and CGT and sale.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.38-47
• /
• 1996

Sectional analysis program for plane strain or axisymmetric geometry of aluminum alloy sheet metals was developed. For modeling the anomalous behavior of aluminum alloy, Barlat's strain rate potential and Hill's 1990 non-quadratic yield theory arranged under the plane stress assumption were employed. 2-D rigid-viscoplastic FEM formulation based on the bending-augmented membrane theory was derived, solving simultaneously force equilibrium as well as non-penetration condition. Isotropic hardening law was also assumed for yielding behavior. To verify the validity and availability of the developed program, 2-D stretch/draw forming process for plane strain geometry and cylindrical cup deep drawing process for axisymmetric geometry were simulated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.44-54
• /
• 1994

A variational formulation and the associated finite elemet equations have been derived for general three-dimensional deformation of a planar anisotropic rigid-plastic sheet metal which obeys the strain-rate potential proposed by BARLAT et al [13]. By using the natural convected coordinate system, the effect of geometric change and the rotation of planar anisotropic axes are considered efficiently. In order to check the validity of present formulation, a cylindrical cup and a square cup deep drawing test was modeled. good agreement was found between the FE simulation and the experiment. The results have shown that the present formulation for planar anisotropic deformation can be efficiently applied to the analysis of sheet metal working processes for planar anisotropic nonferrous metals.