• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.119-128
• /
• 1998

In this paper, nonsteady state shaped drawing process has been investigated using the three-dimensional rigid-plastic finite element method. In order to analyze the shaped drawing process, a method to define straight converging die considering straight die part, die radius part and bearing part has been proposed. In addition, the modeling of initial billet and the generation procedure of mesh system have been suggested. The three-dimensional rigid-plastic finite element simulation has been performed for a square sectional drawing process and its result has been confirmed in comparison with the existing experimental one. Also, for the same process conditions, the effect of perimeter ratio in the shaped drawing process has been investigated.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.796-802
• /
• 2018

In order to remove rust and impurities from surface of raw SUS circular bar, peeling machine is used to make lustrous and clean surface of SUS circular bar. Drawing process system is used to manufacture SUS hexagonal bar. SUS hexagonal bar have been widely used to make hexagonal bolt/nut, adapter and fittings and so on. The purpose of this study is to investigate the stabilities for guide bar of clamp in drawing process system. As the results, the guide bar showed structural stability in cases of below load of 50 Ton and over hook radius of 3.0mm. Further as the thickness of guide bar hooking with jaw was increased, minimum safety factor was decreased.

• Transactions of Materials Processing
• /
• v.25 no.6
• /
• pp.390-395
• /
• 2016

GDI fuel rail is component of GDI system which directly fuel with high pressure in the engine combustion chamber. And it is required to high strength and dimensional accuracy. Multi roll-die drawing process consists of the idle roll-die and drawing die in tandem. In the course of drawing with roll-die, deformation takes place between the idle roller pair or pairs. The friction force decreases with the idle roll-die, enabling the reductions to be risen in one step. In this study, the caliber of 4-roll was designed into pass schedule that made the draw force at the exit of the drawing die be equal. In order to compensate for over-filling area, the roll caliber was modified using the result of FE-analysis. The results of FE-analysis and experiment show that the proposed design method can be used to effectively design the multi roll-die process, leading to an accurate shape and correct dimensions of the final within an allowable tolerance of ${\pm}0.08mm$. Furthermore, the productivity was evaluated by comparing with multi roll-die drawing process and conventional multi shape drawing process. The result was confirmed that it has an efficiency of about 2 times than conventional process in terms of time.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.96-102
• /
• 2021

Hexagonal bolt, nut, fittings, and high-pressure valves with special alloy play an important role in many industrial products. Numerical analysis was conducted to obtain data for designing a new drawing system. This study aims to predict the rolling force of the new drawing system compared to that of the established drawing system. The rolling force of the new drawing system was predicted using numerical analysis by assuming that it is in proportion to deformation. The rolling forces of Mo, Ti, and W were approximately 1.4, 0.5, and 2.5 times those of SUS. Because the values of ultimate strength of special alloys were more close to numerical analysis, the values of ultimate strength could be used to predict the rolling force of the new drawing system without numerical analysis in field.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.1
• /
• pp.9-17
• /
• 2002

The study is insufficient on process planning of the elliptical deep drawing product. Thus, in this present study, the expert system for elliptical deep drawing products was constructed by using process sequence design. The expert system was developed to be based on the general concept of each entity. The system was developed in this work consists of sixth modules. The first one is a shape recognition module to recognize non-axisymmetric products and to generate Entity_list. The second one is three dimensional (3-D) modeling module to calculate the surface area for non-axisymmetric products. The third one is a blank design module to create suggested blanks of three shapes with the identical surface area. The fourth one is shape design module based on the production rules that play the most important role in an expert system for manufacturing. The production rules are generated and upgraded by inter- viewing field engineers, plastic theory and experiments. The fifth and sixth ones are a graphic module to visualize results of the expert system and a post module to rise user's convenience, respectively. According to constructed the expert system for process sequence design, it was possible to reduce the lead time.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.59-70
• /
• 1999

This paper deals with automated computer-aided process planning by which designers can determine operation sequences even if they have little experience in the design of press working products. The computer-aided process planning in hot forging, deep drawing and blanking requires many kinds of technical and empirical skills based on investigation and collection of the knowledge of their processes. An approach to the CAPP system is based on the knowledge-based rules and the process knowledge base consisting of process planning rules is built. The methodology adopted to develop the system is elaborated in this paper. This system has been written in AutoLISP on the AutoCAD with a personal computer and provides powerful capabilities for process planning of hot forging, cold forging, deep drawing and blanking products.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.296-300
• /
• 2003

Design of drawing dies used in real industrial environments. It was designed by CAD software in many small & medium companies, but many products require various types, and sizes. Therefore, many companies are required to reduce process time and design mistakes. In this paper, for the automatic design of drawing dies, Design process considered that easy to team and use. which are used with Visual LISP/DCL language in a commercial CAD package, AutoCAD. It has adopted GUI in design system, and has applied DCL language. The system is based on the knowledge base system which is involved a lot of expert's know-how We have built database of design type and detail sizes. The automatic design system requires basic product type and sizes. Then the system accesses to the database and find out sizes by comparing with input parameters and generate drawing dies file.

• IE interfaces
• /
• v.9 no.1
• /
• pp.41-52
• /
• 1996

As part of effort to reduce the process time from design to manufacture and delivery, the concept of CE(concurrent engineering) has been applied to design process. In this research, the drawing information management system (DIMS) was developed based on CE. The system can distribute electronic documents of drawing or work instruction parallel to all reviewers simultaneously and collect their annotations through network. Mark-up functions are used for annotations on the electronic documents. DIMS is a system which integrates drawing management, engineering BOM, CAD and raster drawings, etc. In this system, a SUN workstation is interfaced with PCs by LAN. CIMCAD-2D, Image Hunter, and ORACLE RDBMS are used for CAD drawings, raster drawings, and drawing information management, respectively. As an integration tool for all the information, LINKAGE is adopted.

• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.35-42
• /
• 1989

The major purpose of this paper is a study on the effect of die profile radius on the formability of spring-type blankholder system in deep drawing process. By drawing the various materials, formability is studied by means of checking the drawing force, blankholding force variation, limiting drawing ratio and wall wrinkling phenomenon. As the die profile radius increases, the maximum drawing force and maximum blankholding force decrease regardless of lubrication condition. Because better lubrication induces blankholding force to rise, spring type blankholder system is better to protect flange wrinkling phenomenon than constant pressure type. And wall wrinkling phenomenon was not detected in experimental die radius range, so the Miyakawa's upper wrinkling limit is understimated in case of material tested.

• Journal of Intelligence and Information Systems
• /
• v.2 no.2
• /
• pp.55-68
• /
• 1996

인공 지능의 주요 분야 중 하나의 전문가시스템 기술은 현재 산업현장에서 여러 가지 분야의 문제해결에 이용되고 있다. 본 논문은 축 대칭 원통형 제품의 deep drawing 공정 설계를 위한 전문가시스템 DOX(Deep drawing Opertion eXpert)의 개발에 관한 것이다. 시스템의 입력은 원통형 제품의 형상 정보와 재질 정보이며 자동 인식 또는 수동입력의 방법으로 입력된다. 시스템은 이러한 정보를 받아들여 deep drawing 공정설계에 필요한 다수의 요소들을 결정하며, 최종결과로서 process layout 도면을 CAD 시스템에서 자동 출력한다. 개발된 전문가시스템의 지식베이스는 산업 분야 전문가의 전문 지식과 경험지식을 획득, 분석하여 구성하였으며, 추론 전략으로는 규칙기반추론(rule-based reasoning)을 이용하였다.