• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.498-506
• /
• 2010

The neutral section was installed in order to prevent conflict with different phase angle source in electric railway catenary system. The speed of electric train reduced due to coasting operation by notch off when it passed the neutral section. And, the catenary wire was damaged and the accident might be happened because of the arc generation when the electric train passed the neutral section with notch on condition. This project has a goal to develop the automatic changeover system using by noncontactless semiconductor device in neutral section of catenary system so that the train pass as notch-on condition. In this first year, we obtain as following results such as domestic and international systems applications and completion requirements, development and analysis of stability for automatic changeover system, design of static switching device on automatic changeover system in neutral section and drawing up interface design and specifications according to equipment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.837-841
• /
• 2000

Spinning process is a chipless metal forming method for axi-symmetric parts, which is more economical, efficient and versatile method of producing parts than the other sheet metal forming process such as stamping or deep drawing. It is a point deformation process where a metal disc. cylinderical workpiece. or preform in contact with a rotating chuck is plastically deformed by axial or axial-radial Motions of a tool or roller. in this study the variation of spring back with respect to various forming roller corner radius(Rr) and angle of roller holder($\alpha$) is investigated. Good as a result will help to get more precise shape by control of spring back.

• The Journal of Korean Physical Therapy
• /
• 제14권3호
• /
• pp.24-44
• /
• 2002

Traction has been used since ancient times in the treatment of painfull spinal conditions, but the literature on traction and its clinical effectiveness Is limited. Traction can be defined as a drawing or pulling tension applied to a body segment. Cervical traction is a technique that applies a longitudinal force of the cervical spine and associated structures. Goals of traction include reduction of radicular signs and symptoms associated with conditions such as disk protrusion, degenerative disk disease, lateral stenosis, muscle spasm, and subluxations. The various mechanical factors most relevant to cervical traction are organized and discussed. The factors presented are 1) angle of pull, 2) Traction force, 3) duration of traction, 4) neck position and clinical application, and 5) frequency of treatment. It should allow physical therapists to adjust traction protocol to match the patient's symptoms and diagnosis. The purpose of this study is to provide a comprehensive overview of the cervical traction and treatment guidelines.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.194-197
• /
• 1997

The texture of a 0.25mm dia high-carbon(0.73%) steel wire made by drawing the patented and brass coated 1.4mm wire through 22 dies with a die-angle of 12$^{\circ}$has been measured. The ideal fiber texture was obtained in the center layer, while the circular texture and the near fiber texture having {111}<110> and weak {112}<110> components were obtained in the intermediate and surface layers, respectively. The circular texture was approximated by {110}<110> plus {110}<114>. The texture could be predicted by the Taylor-Bishop-Hill theory coupled with FEM for deformation.

• 소성∙가공
• /
• 제26권3호
• /
• pp.162-167
• /
• 2017

The tensile surface residual stress in the multi-pass drawn wire deteriorates the mechanical properties of the wire. Therefore, the evaluation of the residual stress is very important. Especially, the axial residual stress on the wire surface is the highest. Therefore, the objective of this study was to propose an axial surface residual stress prediction model of the multi-pass drawn steel wire. In order to achieve this objective, an elastoplastic finite element (FE) analysis was carried out to investigate the effect of semi-die angle and reduction ratio of the axial surface residual stress. By using the results of the FE analysis, a surface residual stress prediction model was proposed. In order to verify the effectiveness of the prediction model, the predicted residual stress was compared to that of a wire drawing experiment.

• 한국의류학회지
• /
• 제22권3호
• /
• pp.303-311
• /
• 1998

We developed a pattern drafting computer program using a popular CAD program for the purpose of the automatic manufacturing and education based on the concept of the easy -order-system which can easily reflect body characteristics and design favors of individuals to the ready-made clothing. The programs were written in Auto LISP which can utilise most of frictions of the Auto CAD, and the result of the design for an full-pleated skirt was shown. Also, we devised an easy way to set the location of reference points by inputting of tangential angle only for the use of the cubic spline curve which can represent body shape very well. Finally, by marking down all of symbols needed in manufacturing process, we completed the automatic pattern drafting program to make it useful as an industrial pattern without any amendment or correction in cutting and sewing operation.

• 한국태양에너지학회 논문집
• /
• 제22권2호
• /
• pp.1-10
• /
• 2002

This study is a study on the building integrated method of Photovoltaic. It was analyzed into a basic installation condition and an integrated form in this study. And it was confirmed through the 3D simulation & drawing work of an integrated situation to the real domestic building. The Photovoltaic installation of the country to an optimal efficiency for the year must be installed to the due south with an angle of thirty degrees. And also a module spacing must be more than doubled from the bottom to the top of module to prevent from efficiency falling by a shadow of photovoltaic module in a roof setting of flat roof. If Photovoltaic module is an adequate material that is a basic requirement as a building's finishing material, it's not only an efficiency of alternation with an existing finishing material but also a building's design element.

• 한국전문물리치료학회지
• /
• 제21권3호
• /
• pp.1-10
• /
• 2014

The aim of this study was to investigate the effect of hip external rotation angle on pelvis and lower limb muscle activity during prone hip extension. Sixteen healthy men were recruited for this study. Each subject performed an abdominal drawing-in maneuver (ADIM) in a prone position, and extended the dominant hip at three different hip external rotation angles ($0^{\circ}$, $20^{\circ}$, $40^{\circ}$) with a $30^{\circ}$ hip joint abduction. Activity of the gluteus maximus (G Max), gluteus medius (G Med), and hamstring (HAM) and the G Max/HAM and G Med/HAM ratios were determined with surface electromyography (EMG). The EMG signal was normalized to 100% maximum voluntary isometric contractions (MVICs) and expressed as %MVIC. Data were analyzed by one-way repeated analysis of variance (alpha level=.05) and the Bonferroni post hoc test. Significant differences in G Max and G Med muscle activity were noted among the three different hip external rotation angles. G Max muscle activity increased significantly at both $40^{\circ}$ (p=.006) and $20^{\circ}$ (p=.010) compared to a $0^{\circ}$ hip external rotation angle. G Med muscle activity increased significantly at $20^{\circ}$ (p=.013) compared to a $40^{\circ}$ hip external rotation angle. The G Max/HAM activity ratio increased significantly at both $40^{\circ}$ (p=.004) and $20^{\circ}$ (p=.014) compared to a $0^{\circ}$ hip external rotation angle. The G Med/HAM activity ratio increased significantly at $20^{\circ}$ (p=.013) compared to a $40^{\circ}$ hip external rotation angle. In conclusion, $40^{\circ}$ and $20^{\circ}$ hip external rotation angles are recommended to increase G Max activity, and $20^{\circ}$ hip external rotation is advocated to enhance G Med muscle activity during prone hip extension with ADIM and $30^{\circ}$ hip abduction in healthy subjects.

• 폴리머
• /
• 제26권3호
• /
• pp.335-343
• /
• 2002

블렌드 (PET/PETG 70/30 블렌드) 수지는 폴리에틸렌테레프탈레이트 (PET)와 폴리에틸렌테레프탈레이트 글리콜 (PETG)을 무게 비 70/30으로 혼합하여, 이축 압출기를 사용하여 제조하였다. 미연신 필름은 이 블렌드와 순수 PETG 수지를 압축성형기로 각각 용융 압축시켜 제조하였고 연신 필름은 미연신 필름을 모세관 레오메타를 사용하여 연신시켜 제조하였다. 제조된 블렌드 연신 필름과 PETG 연신 필름의 결정성, 수축율, 열적, 동역학적 및 기계적 특성을 X-선 회절분석기, 오븐기, DSC, 및 인장시험기를 사용하여 조사하였다. 블렌드와 PETG필름의 결정화도와 밀도는 연신비와 연신 속도의 증가와 더불어 증가하였으나 반면 연신 온도 증가와 더불어 감소하였다 또한 블렌드 필름의 결정화도와 밀도는 PETG 필름보다 높게 나타났다. 두 필름의 인장강도와 인장탄성률은 연신비 및 연신 속도 증가와 더불어 증가하였고 연신온도 증가에 따라 감소하였다. 또한 블렌드 필름의 인장강도와 인장탄성률이 PETG 필름 보다 높게 나타났다. 두 필름의 수축율은 연신비와 연신 속도가 증가할수록 감소하였고 미연신 블렌드 필름의 수축율이 순수 PET 필름보다 600% 증가함을 보였다.

• 한국전문물리치료학회지
• /
• 제25권4호
• /
• pp.27-36
• /
• 2018

Background: We developed a novel integrative lumbar stabilization technique that combines lumbar extension (LE) exercise with abdominal drawing-in maneuver (ADIM) to ameliorate low back pain (LBP) associated with neuromuscular imbalance and instability, based on the collective evidence of contemporary spinal rehabilitation. Objects: The specific aim of the present study was to investigate the effects of LE exercise with and without ADIM on core muscle strength, lumbar spinal instability, and pain, as well as functional characteristics in individuals with LBP using advanced radiographic imaging techniques. Methods: patients with mechanical LBP (N = 40, 6 males; $35.1{\pm}7.6years$) were recruited and randomly assigned either to the combined LE and ADIM (experimental group) or the LE alone (control group). Outcome measures included the visual analog scale, the modified Oswestry Disability Index, muscle strength imbalance (MSI), and radiographic imaging. The lumbar intervertebral displacement (LID), intervertebral (IV) and total lumbar extension (TLE) angles were calculated to evaluate the lumbar segmental instability. Results: The experimental group showed significant differences in the L3-L4, L5-S1 LIDs, L4-L5 and L5-S1 IV angles, and TLE angle as compared to the controls (p<.05). Immediate pain reduction and muscle strength imbalance ratio were significantly different between the groups (p<.05). Conclusion: These results suggest that the addition of ADIM significantly increased lumbar spinal stabilization in individuals with LBP, thereby reducing pain associated with functional lumbar flexion during daily activities.