• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.498-506
• /
• 2010

The neutral section was installed in order to prevent conflict with different phase angle source in electric railway catenary system. The speed of electric train reduced due to coasting operation by notch off when it passed the neutral section. And, the catenary wire was damaged and the accident might be happened because of the arc generation when the electric train passed the neutral section with notch on condition. This project has a goal to develop the automatic changeover system using by noncontactless semiconductor device in neutral section of catenary system so that the train pass as notch-on condition. In this first year, we obtain as following results such as domestic and international systems applications and completion requirements, development and analysis of stability for automatic changeover system, design of static switching device on automatic changeover system in neutral section and drawing up interface design and specifications according to equipment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.837-841
• /
• 2000

Spinning process is a chipless metal forming method for axi-symmetric parts, which is more economical, efficient and versatile method of producing parts than the other sheet metal forming process such as stamping or deep drawing. It is a point deformation process where a metal disc. cylinderical workpiece. or preform in contact with a rotating chuck is plastically deformed by axial or axial-radial Motions of a tool or roller. in this study the variation of spring back with respect to various forming roller corner radius(Rr) and angle of roller holder($\alpha$) is investigated. Good as a result will help to get more precise shape by control of spring back.

• The Journal of Korean Physical Therapy
• /
• v.14 no.3
• /
• pp.24-44
• /
• 2002

Traction has been used since ancient times in the treatment of painfull spinal conditions, but the literature on traction and its clinical effectiveness Is limited. Traction can be defined as a drawing or pulling tension applied to a body segment. Cervical traction is a technique that applies a longitudinal force of the cervical spine and associated structures. Goals of traction include reduction of radicular signs and symptoms associated with conditions such as disk protrusion, degenerative disk disease, lateral stenosis, muscle spasm, and subluxations. The various mechanical factors most relevant to cervical traction are organized and discussed. The factors presented are 1) angle of pull, 2) Traction force, 3) duration of traction, 4) neck position and clinical application, and 5) frequency of treatment. It should allow physical therapists to adjust traction protocol to match the patient's symptoms and diagnosis. The purpose of this study is to provide a comprehensive overview of the cervical traction and treatment guidelines.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.194-197
• /
• 1997

The texture of a 0.25mm dia high-carbon(0.73%) steel wire made by drawing the patented and brass coated 1.4mm wire through 22 dies with a die-angle of 12$^{\circ}$has been measured. The ideal fiber texture was obtained in the center layer, while the circular texture and the near fiber texture having {111}<110> and weak {112}<110> components were obtained in the intermediate and surface layers, respectively. The circular texture was approximated by {110}<110> plus {110}<114>. The texture could be predicted by the Taylor-Bishop-Hill theory coupled with FEM for deformation.

• Transactions of Materials Processing
• /
• v.26 no.3
• /
• pp.162-167
• /
• 2017

The tensile surface residual stress in the multi-pass drawn wire deteriorates the mechanical properties of the wire. Therefore, the evaluation of the residual stress is very important. Especially, the axial residual stress on the wire surface is the highest. Therefore, the objective of this study was to propose an axial surface residual stress prediction model of the multi-pass drawn steel wire. In order to achieve this objective, an elastoplastic finite element (FE) analysis was carried out to investigate the effect of semi-die angle and reduction ratio of the axial surface residual stress. By using the results of the FE analysis, a surface residual stress prediction model was proposed. In order to verify the effectiveness of the prediction model, the predicted residual stress was compared to that of a wire drawing experiment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.303-311
• /
• 1998

We developed a pattern drafting computer program using a popular CAD program for the purpose of the automatic manufacturing and education based on the concept of the easy -order-system which can easily reflect body characteristics and design favors of individuals to the ready-made clothing. The programs were written in Auto LISP which can utilise most of frictions of the Auto CAD, and the result of the design for an full-pleated skirt was shown. Also, we devised an easy way to set the location of reference points by inputting of tangential angle only for the use of the cubic spline curve which can represent body shape very well. Finally, by marking down all of symbols needed in manufacturing process, we completed the automatic pattern drafting program to make it useful as an industrial pattern without any amendment or correction in cutting and sewing operation.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2002

This study is a study on the building integrated method of Photovoltaic. It was analyzed into a basic installation condition and an integrated form in this study. And it was confirmed through the 3D simulation & drawing work of an integrated situation to the real domestic building. The Photovoltaic installation of the country to an optimal efficiency for the year must be installed to the due south with an angle of thirty degrees. And also a module spacing must be more than doubled from the bottom to the top of module to prevent from efficiency falling by a shadow of photovoltaic module in a roof setting of flat roof. If Photovoltaic module is an adequate material that is a basic requirement as a building's finishing material, it's not only an efficiency of alternation with an existing finishing material but also a building's design element.

• Physical Therapy Korea
• /
• v.21 no.3
• /
• pp.1-10
• /
• 2014

The aim of this study was to investigate the effect of hip external rotation angle on pelvis and lower limb muscle activity during prone hip extension. Sixteen healthy men were recruited for this study. Each subject performed an abdominal drawing-in maneuver (ADIM) in a prone position, and extended the dominant hip at three different hip external rotation angles ($0^{\circ}$, $20^{\circ}$, $40^{\circ}$) with a $30^{\circ}$ hip joint abduction. Activity of the gluteus maximus (G Max), gluteus medius (G Med), and hamstring (HAM) and the G Max/HAM and G Med/HAM ratios were determined with surface electromyography (EMG). The EMG signal was normalized to 100% maximum voluntary isometric contractions (MVICs) and expressed as %MVIC. Data were analyzed by one-way repeated analysis of variance (alpha level=.05) and the Bonferroni post hoc test. Significant differences in G Max and G Med muscle activity were noted among the three different hip external rotation angles. G Max muscle activity increased significantly at both $40^{\circ}$ (p=.006) and $20^{\circ}$ (p=.010) compared to a $0^{\circ}$ hip external rotation angle. G Med muscle activity increased significantly at $20^{\circ}$ (p=.013) compared to a $40^{\circ}$ hip external rotation angle. The G Max/HAM activity ratio increased significantly at both $40^{\circ}$ (p=.004) and $20^{\circ}$ (p=.014) compared to a $0^{\circ}$ hip external rotation angle. The G Med/HAM activity ratio increased significantly at $20^{\circ}$ (p=.013) compared to a $40^{\circ}$ hip external rotation angle. In conclusion, $40^{\circ}$ and $20^{\circ}$ hip external rotation angles are recommended to increase G Max activity, and $20^{\circ}$ hip external rotation is advocated to enhance G Med muscle activity during prone hip extension with ADIM and $30^{\circ}$ hip abduction in healthy subjects.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.335-343
• /
• 2002

Blend resin (PET/PETG 70/30 blend) of poly (ethylene terephthalate) (PET) and poly (ethylene terephthalate glycol) (PETG) of weight percent 70/30 was prepared by a twin-screw extruder. Undrawn films of the blend and pure PETG were made by melt-press in hot press. Drawn films were made by capillary rheometer. Crystallinity, shrinkage, thermal, dynamic mechanical, and mechanical properties of these blends and PETG drawn films were investigated by wide angle X-ray diffractometer, dry oven, DSC thermal analyzer, and tensile tester. The crystallinity and density of these films increased with increasing draw ratio and draw rate but decreased with increasing draw temperature. The crystallinity and density of the blend films were higher than those of PETG films. The tensile strength and tensile modulus of these drawn alms increased with increasing draw ratio and draw rate but decreased with increasing draw temperature. The tensile strength and tensile modulus of blend films were higher than those of PETG films. Shrinkage of PETG md blend films decreased with draw ratio and draw rate. Shrinkage of undrawn blend film was 600% higher than that of pure PET film.

• Physical Therapy Korea
• /
• v.25 no.4
• /
• pp.27-36
• /
• 2018

Background: We developed a novel integrative lumbar stabilization technique that combines lumbar extension (LE) exercise with abdominal drawing-in maneuver (ADIM) to ameliorate low back pain (LBP) associated with neuromuscular imbalance and instability, based on the collective evidence of contemporary spinal rehabilitation. Objects: The specific aim of the present study was to investigate the effects of LE exercise with and without ADIM on core muscle strength, lumbar spinal instability, and pain, as well as functional characteristics in individuals with LBP using advanced radiographic imaging techniques. Methods: patients with mechanical LBP (N = 40, 6 males; $35.1{\pm}7.6years$) were recruited and randomly assigned either to the combined LE and ADIM (experimental group) or the LE alone (control group). Outcome measures included the visual analog scale, the modified Oswestry Disability Index, muscle strength imbalance (MSI), and radiographic imaging. The lumbar intervertebral displacement (LID), intervertebral (IV) and total lumbar extension (TLE) angles were calculated to evaluate the lumbar segmental instability. Results: The experimental group showed significant differences in the L3-L4, L5-S1 LIDs, L4-L5 and L5-S1 IV angles, and TLE angle as compared to the controls (p<.05). Immediate pain reduction and muscle strength imbalance ratio were significantly different between the groups (p<.05). Conclusion: These results suggest that the addition of ADIM significantly increased lumbar spinal stabilization in individuals with LBP, thereby reducing pain associated with functional lumbar flexion during daily activities.