• Composites Research
• /
• v.35 no.3
• /
• pp.188-195
• /
• 2022

This paper proposes a multiscale process-structural analysis methodology and applies to a battery housing part made of the short fiber-reinforced and fabric-reinforced composite layers. In particular, uncertainties of the material properties within the microscale representative volume element (RVE) were considered. The random spatial distribution of matrix properties in the microscale RVE was realized by the Karhunen-Loeve Expansion (KLE) method. Then, effective properties of the RVE reflecting on spatially varying matrix properties were obtained by the computational homogenization and mapped to a macroscale FE (finite element) model. Morever, through the hybrid process simulation, a FE (finite element) model mapping residual stress and fiber orientation from compression molding simulation is combined with one mapping fiber orientation from the draping process simulation. The proposed method is expected to rigorously evaluate the design requirements of the battery housing part and composite materials having various material configurations.

• International Journal of Costume and Fashion
• /
• v.15 no.2
• /
• pp.79-91
• /
• 2015

Creativity is an ever-increasing research area related to fashion design, namely the documentation and dissemination of creative scholarship. The purpose of this project is to apply creative bridge or creative leap theory to the development of an existing designer's garment collection using the creative design process of an architect. A single case study design was used to investigate the phenomenon of design process creative leap using a direct observation. Results indicate the difficult challenge of producing new and individualized silhouettes for the marketability of clothing, it is apparent that new methods of fostering creativity in designers through non-traditional approaches would benefit the education of apparel designers. Through targeted design practice, educators and practitioners can apply the principles of scientific inquiry into design processes to solve a problem, address a challenge, or create based on personal inspirations.

• Composites Research
• /
• v.16 no.4
• /
• pp.29-35
• /
• 2003

In this paper. various tow parameters such as equivalent tow thickness, amplitude of longitudinal tow and tow intervals were investigated and compared with each other by using microscopic observation to find out the exact deformation patterns between both directions of the fabric structure(Longitudinal and Transverse Directions). And those observation results were compared with bias extension. biaxial tests results with dry fabric which has the same tow structure as the draped helmet materials and also compared with prepreg specimen which is cured by autoclave moulding without vacuum and pressure condition. Specimens for the observation were taken from draped helmet which is made of fabric composite(Five Harness Satin Weave). From the observation results, it was found that there are different deformation pattern between tow directions and effect of geometric condition on the deformation of the fabric materials during draping process was verified.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1399-1408
• /
• 2011

This study analyzes the current educational curricula in the field of clothing construction to provide some fundamental information for developing more appropriate educational courses and to activate the fashion business. A total of 82 different departments related to fashion and apparel were selected from four-year domestic universities and the curricula recently posted on their internet websites were analyzed by descriptive statistics. More than half (53.7%) of the 82 departments were offering classes in the clothing construction field for 3 credits and 4 class hours. College affiliation of the departments that offered curricula in the clothing construction field was classified into 5 categories: the arts (34), human ecology (22), natural sciences (14), humanities/culture (9), and others (3). Human ecology category showed the highest results in the average class hours (3.9), the number of classes in the clothing construction field (7.6), and the percentage of the classes in the clothing construction field out of all major classes offered by the clothing department (19.9%). All 82 departments were classified into 3 categories of: fashion design (32), clothing (28), and fashion business (22). The clothing category showed the highest results in the average credits (2.8), class hours (3.8), the number of classes offered by the clothing construction field (7.6), and the percentage of the classes that offer clothing construction education out of all major classes offered by the clothing department (19.9%). The educational contents of clothing construction area were classified into 8 different categories of: basic theory and sewing, clothing construction, flat pattern, draping, tailoring and advanced clothing construction, pattern CAD, sewing science and apparel manufacturing process, and clothing construction for special needs. Among these categories, the draping category constituted 21.7% as the largest part. In addition, the distribution of classes offered by 4 academic years were analyzed into 8 different categories.

• Composites Research
• /
• v.22 no.4
• /
• pp.20-26
• /
• 2009

In the current study, thermoforming and compression analysis were carried out for the woven composite egg-box panel with the non-orthogonal constitutive material model, which is proposed by Xue et al. The material model is implemented in commercial engineering software, LS-DYNA, with a user subroutine. Directional properties in non-orthogonal coordinates are determinedusing the deformation gradient tensor and the material modulus matrix in local coordinate is updated at eaeh corresponding time step. After the implemented non-orthogonal constitutive model is verified by the bias extension test, the egg-box panel simulations are performed. The egg-box panel simulations are divided into two categories: thermoforming (draping) and crushing. The finite element model for crushing analysiscan be obtained using the displacement result of thermoforming process.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.139-142
• /
• 2004

The fabric composite rings for nozzle parts of solid rocket motors should be thick to endure high temperature and pressure of combustion gas. Since the thermal residual stresses developed during manufacturing of the axi-symmetric composite structures increase as the thickness increases and eventually induce failures during storage and operation, the estimation of the residual stresses is indispensable for design and manufacture of the thick composite nozzle parts. In this paper, thick fabric rings made of carbon fabric phenolic composites were fabricated in a hydroclave and in an autoclave using a multi-step pre-compaction process to minimize draping. The residual stresses distributed in the rings were measured by the radial-cut method and it was found that the compaction reduces the residual stresses in the composite ring.

• Human Ecology Research
• /
• v.58 no.2
• /
• pp.215-228
• /
• 2020

Underlying dress forms for high coverage patterns are very important in the dress industry. Size 9 from brand D was chosen according to the analysis that it was the best option because a dress should have a large allowable range in one size. The criteria for selection were the dress form with a waist circumference of 63.50 centimeters, which is close to the standard size of women in Korea. Brassieres for dresses were included to enhance the aesthetic value of the correction process in producing a basic dress pattern. An experimental torso pattern was applied to evaluate the fit and suitability of the dress form that was also later verified in the process of the dress works. Three dresses were produced and presented on the chosen study dress form. The research procedures are as follows. First, the sell-through rates and feedbacks were collected from the dress form vendor. Second, a literature survey on dresses and a dress company investigation were conducted. Third, the amount of body dimension changes due to the use of a bra in the dresses were examined. Fourth, after the correction of the dress form, the torso pattern was made by draping. Fifth, the torso experimental clothing made of muslin material was evaluated. Sixth, the dress works of the top design were presented using the size 9 basic pattern developed by brand D.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.776-786
• /
• 2016

This study intends to suggest production process of circular knitted jackets and dimensional change data of finished clothes after washing. the study provides pattern design method of circular knitted jackets by applying dimensional change. By doing so, the purpose of this study is to increase production efficiency through accurate order in consideration of loss amount of the fabrics in production. With the three fabric materials selected, this study investigated dimensional change of circular knitted jackets after sewing and washing by varying the parts to be attached to padding cloth and with or without inner lining. As for the fabric F-C (including the spandex, thicker and weightier than the other two fabrics), front width shrunk by 4.6%, which showed the biggest shrinkage among the jackets made of test fabrics. Then it suggested design methods of circular knitted jacket patterns to which dimensional change is applied according to materials, and analyzed the amount of fabric required for production by comparison of the materials. When using the fabric F-C without inner lining, there is big dimensional change and more than double amount of fabric is required. It is expected that the research results will be a basic data for pattern design and production process of circular knitted clothing.

• The Research Journal of the Costume Culture
• /
• v.17 no.3
• /
• pp.396-406
• /
• 2009

Drapery costume started with using one fabric to loosely wrap around one's body without using technical skills or needlework. Drapery becomes a beautiful and indeterminate form of pleated costume which determines the costume silhouette and serves as an essential component for the composition of artistic costume. The purpose of this study was to examine the aesthetic characteristics of drapery costume using literature review. The study methods include considerations of the formation process of drapery costume with the analysis of costume in pictures. For modern costume designs, the study analyzed the designer's dress with a focus on drapery forms, which appeared in the collections from 2001 to 2007. First, drapery costume contains the beauty of human body. Drapery costume reveals the smallest movement of the body. The beauty of drapes, which is naturally revealed along the curve of the body, and the pleats which form on the soft cloth create the beauty of body. Second, drapery costume has rhythmical beauty. Drapery pleats feature not only functions, but also unique formativeness that provides rhythmicity and regular or irregular direction effects by line. Third, drapery costume features elegant beauty. Bias cutting by draping can effectively express the elegant characteristics of the fabric. In making a piece of clothing, the composition method can express elegant beauty by covering up the shortcomings of the fitting and by fitting to the body line without cutting the fabric, or fitting it by bias cutting.

• Journal of Fashion Business
• /
• v.19 no.6
• /
• pp.28-41
• /
• 2015

Properties of textile fabrics influence the appearance, aesthetics, and performance of garment. Drape and related properties of fabrics affect profoundly the static and dynamic appearance during wearer's movement. The three dimensional shape of the folded structure often deforms with time or with subtle vibration around the fabric specimen during the drape measurement. Due to the uneven and complex nature of fabrics, the overall shape of the fabric specimen on the drape tester often becomes unstable. There is a need to understand the fundamental mechanisms of how draping may generate pleasing forms. Two drape test methods, conventional Cusick drape test, and in-built drape tester, based on a depth camera, are compared. Fabric specimens including cotton, linen, silk, wool, polyester, and rayon are investigated for the fabric drape and other physical/mechanical parameters. Drape coefficient values of fabric specimens are compared based on the final drape images, together with the intermediate 3D drape images of the specimens during elevation process of the drape tester equipped with a stepper motor system. The correlation coefficient between the data based on the two methods is reasonably high. Another advantage from the depth camera system is that it allows further analysis of three-dimensional information regarding the fabric drape shape, including the shape of nodes or crest and trough.