• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.251-263
• /
• 2008

In this paper, we report an analytical modeling and 2-D Synopsys Sentaurus TCAD simulation of ion implanted silicon carbide MESFETs. The model has been developed to obtain the threshold voltage, drain-source current, intrinsic parameters such as, gate capacitance, drain-source resistance and transconductance considering different fabrication parameters such as ion dose, ion energy, ion range and annealing effect parameters. The model is useful in determining the ion implantation fabrication parameters from the optimization of the active implanted channel thickness for different ion doses resulting in the desired pinch off voltage needed for high drain current and high breakdown voltage. The drain current of approximately 10 A obtained from the analytical model agrees well with that of the Synopsys Sentaurus TCAD simulation and the breakdown voltage approximately 85 V obtained from the TCAD simulation agrees well with published experimental results. The gate-to-source capacitance and gate-to-drain capacitance, drain-source resistance and trans-conductance were studied to understand the device frequency response. Cut off and maximum frequencies of approximately 10 GHz and 29 GHz respectively were obtained from Sentaurus TCAD and verified by the Smith's chart.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1167-1174
• /
• 2008

Vertical drain method, which is one of the soft ground improvement methods, shorten s drain path to accelerate consolidation process and is applied in many sites. At a recent, composite discharge capacity experiment that analyze discharge amount by consolidation behavior with overburden pressure of soft ground in laboratory, simulates similarly with actuality. Geotechnical engineering problems such a s soft ground improvement are solved by numerical analysis by development of computer and numerical analysis techniques. Numerical analysis does that result is contrary by user's inexperience for choice of constitution model and application of analysis method. Therefore, this thesis experiments on composite discharge capacity test and study discharge capacity of drain and consolidation behavior of soft ground installed prefabricated vertical drain boards. Also, This thesis studied reasonable input parameters and constitution model by compare results of composite discharge capacity test and numerical analysis using PLAXIS that is 2D finial element numerical analysis program.

• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.121-128
• /
• 2014

Development of the economic methods and the design of the standard sections needs the more project fund and land than ever leads to the objection of enlarging canal arrangement to need economic construction method development and standard design for supporting it. The objective of this study was to evaluate the performance of selected sediment reduction methods to reduce sediment discharges from drain and irrigation of different land types (Mountain, Flatten, Reclaimed land). This study was carried out to analysis for the soil loss and sediment of drain and irrigation by comparing RUSLE method and amount of sediment from amount of dredging data of Korea Rural Corporation. The results of study were analyzed and summarized as follow. Size of soil sediment from the upper region of drain and irrigation of mountains bigger than lower region. But in case of flatten and reclaimed land, size of soil sediment from the upper and lower region of drain and irrigation did not classified. In case of comparison drain and irrigation without classifying of land type, size of soil sediment from irrigation is bigger than drain.

• 한국지반공학회지:지반
• /
• 제8권1호
• /
• pp.67-80
• /
• 1992

본 연구에서는 시간에 따른 공사하중의 크기 변화가 다양할 경우에, smear zone및 well resistance의 영향을 모두 고려하여 설계시에 요구되는 모래기등 영향원의 반지름(즉, 모래기둥의 설치간격)을 결정하기 위한 해석법을 제시하였다. 이를 위해 단순선형점증하중의 경우에 대해 제시된 Olson의 해석법(smear zone 및 well resistance의 영향을 모두 무시한 경우)을 변형하였으며, 아울러 제시된 해석법을 토대로 설계에 관련된 여러가지 변수가 모래기end의 설치간격에 미치는 영향을 조건별로 분석하였다.

• 한국통신학회논문지
• /
• 제28권7A호
• /
• pp.451-466
• /
• 2003

Untethered nodes in mobile ad-hoc networks strongly depend on the efficient use of their batteries. In this paper, we propose a new metric, the drain rate, to forecast the lifetime of nodes according to current traffic conditions. This metric is combined with the value of the remaining battery capacity to determine which nodes can be part of an active route. We describe new route selection mechanisms for MANET routing protocols, which we call the Minimum Drain Rate (MDR) and the Conditional Minimum Drain Rate (CMDR). MDR extends nodal battery life and the duration of paths, while CMDR also minimizes the total transmission power consumed per packet. Using the ns-2 simulator and the dynamic source routing (DSR) protocol, we compare MDR and CMDR against prior proposals for power-aware routing and show that using the drain rate for power-aware route selection offers superior performance results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 가을 학술발표회 논문집
• /
• pp.141-148
• /
• 1996

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.500-505
• /
• 2000

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Neverthless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the characteristics of attenuation and propagation of Sand Drain Method in construction field. On the basis of measurement value, we analysed about prediction possibility of Sand Drain Method. This study also present a basic data found a effective plans for Sand Drain Method.

• 센서학회지
• /
• 제26권2호
• /
• pp.79-84
• /
• 2017

The drain current of the SB MOSFET was analytically modeled by an equation composed of thermionic emission and tunneling with consideration of the image force lowering. The depletion region electron concentration was used to model the channel electron concentration for the tunneling current. The Schottky barrier width is dependent on the channel electron concentration. The drain current is changed by the gate oxide thickness and Schottky barrier height, but it is hardly changed by the doping concentration. For a GaN SB MOSFET with ITO source and drain electrodes, the calculated threshold voltage was 3.5 V which was similar to the measured value of 3.75 V and the calculated drain current was 1.2 times higher than the measured.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.128-133
• /
• 2009

Brain drain of scientists and technologists to the United States from other countries is a phenomenal issue due to the potential developmental impacts it could have on sending countries. Immigration policies undoubtedly play the major part to shape the human resource outcomes. There has been a common sense explanation to the brain drain trend, which states that the lower English language requirements in the scientific and technology jobs compared to other high skill brain drain jobs offer immigrants more favorable employment opportunities. These and other language related variables are used with standard human capital model variables to assess the validity of the common sense proposition.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.1043-1050
• /
• 2014

물이 채워진 원통 용기를 회전시킨 후 배수하면 일정시간이 지난 후 공기기둥이 발생한다. 용기의 크기, 초기 회전 속도나 교반 속도, 배수구 모양 등의 배수조건에 따라 공기기둥의 발생 여부나 발생시간이 달라진다. 본 연구에서는 2 단으로 구성된 계단형 배수구를 가진 원통 용기에서 물이 배수되는 과정을 수치해석적으로 연구하였다. 하부에 위치한 배수구 1 단은 길이와 반경이 고정되어 있고, 상부에 위치한 2 단은 길이와 반경을 변화시켰다. 2 차원 격자계에 축대칭 조건을 적용하여 원통 용기 내부의 배수유동을 해석하였다. 물과 공기의 자유표면 모양을 추적하여 수위 변화를 관찰하였으며, 배수구 2단의 형상이 공기기둥 발생시간과 내부 유동구조 변화에 미치는 영향을 확인하였다.