• 제목/요약/키워드: Drain Pump System

검색결과 5건 처리시간 0.02초

도시 지하차도 침수 분석을 통한 강제배제시설 평가 (Evaluation of Drain Pump System by Inundation Analysis in Urban Underground Passage)

  • 이정호
    • 한국산학기술학회논문지
    • /
    • 제8권5호
    • /
    • pp.1192-1200
    • /
    • 2007
  • 도시유역의 강우 유출은 대부분 불투수지역인 도시유역의 유출 특성상 빠른 도달시간을 갖는다. 일반적으로 도시유역에서의 강우 유출은 배수펌프장으로 집수되어 하천으로 배제된다. 그러나 설계강우를 초과하는 호우가 발생하였을 때에는 배수펌프장의 용량을 초과하여 전량 하천으로 배제하기가 어려우며 따라서, 도시유역에서의 내수침수위험성이 증가하게 된다. 현행의 배수펌프장에서의 펌프 운영 기준은 배수펌프장의 집수정 또는 유수지의 수위에 따라서 가동되도록 구성되어있다. 그러나 최근 빈번히 발생하는 국지적 집중호우는 배수펌프장의 설계용량을 초과하는 경우가 대부분이며 배수펌프장이 제어할 수 없는 강우 유출은 도시유역에서의 내수침수를 발생시킨다. 본 연구에서는 도시 지하차도에서의 실제 내수침수 사례에 대한 모의를 통하여 당시 침수 발생의 요인을 분석하고 펌프 운영에 대한 변화를 통하여 배수펌프장 강제배제시설에 대하여 평가하였다.

  • PDF

전자제어 커먼레일 압축착화엔진용 고압연료펌프의 DME 적용 성능에 관한 연구 (A Study on the DME Application Performance of a High Pressure Fuel Pump for an Electric Controlled Common-rail Compression Ignition Engine)

  • 정재우;김남호;강정호;박상욱;이호길;최승규
    • 한국자동차공학회논문집
    • /
    • 제17권2호
    • /
    • pp.132-140
    • /
    • 2009
  • Recently, the interest in the development of high efficiency Diesel engine technology using alternative fuel has been on the rise and related studies are being performed. Therefore, the DME(Dimethyl Ether), an oxygen containing fuel as an alternative fuel for light oil that can be used for diesel engines since it generates very little smoke. But it is unavoidable that the modification of a fuel supply system in an engine to application of the DME fuel because of DME fuel properties. So, in this study, a DME high pressure pump for a common-rail fuel supply system has been composed and the test results of the pump have been presented. As the results of the tests, it is confirmed that DME pump inlet pressure, pump speed and common-rail pressure effects on the volumetric efficiencies of the pump. Finally, it is defined that the optimum plunger volume of a DME pump has to be extended to the minimum 150% compared to a Diesel pump plunger volume considering DME fuel properties and volumetric efficiencies characteristics at same specifications of the high pressure pump.

국내 원자력발전소의 화재사건 확률론적안전성평가에서 다중오동작 분석 연구 (A Study on the Multiple Spurious Operation Analysis in Fire Events Probabilistic Safety Assessment of Domestic Nuclear Power Plant)

  • 강대일;정용훈;최선영;황미정
    • 한국안전학회지
    • /
    • 제33권6호
    • /
    • pp.136-143
    • /
    • 2018
  • In this study, we conducted a pilot study on the multiple spurious operations (MSO) analysis in the fire probabilistic safety assessment (PSA) of domestic nuclear power plant (NPP) to identify the degree of influence of the operator actions used in the MSO mitigation strategies. The MSO scenario of the domestic reference NPP selected for this study is refueling water tank (RWT) drain down event. It could be caused by spurious operations of the containment spray system (CSS) of the reference NPP. The RWT drain down event can be stopped by the main control room (MCR) operator actions for stopping the operation of CSS pump or closing the CSS motor operated valve if the containment spray actuation signal (CSAS) is spuriously actuated. Outside the MCR, it can be stopped by operator actions for closing the CSS manual valves or motor operated valve or stopping the operation of CSS pump. The quantification result of a fire PSA model that takes into account all recovery actions for the RWT drain down event lead to risk reduction by about 95%, compared with quantification result of fire PSA model without considering them. Among the various operator actions, the recovery action for the spurious CSAS operations and the operator action for the manual valve are identified as the most important operator actions. This study quantitatively showed the extent to which the operator actions used as MSO countermeasures have affected the fire PSA quantification results. In addition, we can see the rank of importance among the operator recovery actions in quantitative terms.

설비공학 분야의 최근 연구 동향 : 2013년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2013)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제26권12호
    • /
    • pp.605-619
    • /
    • 2014
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

960MHz Quadrature LC VCO를 이용한 CMOS PLL 주파수 합성기 설계 (Design of a 960MHz CMOS PLL Frequency Synthesizer with Quadrature LC VCO)

  • 김신웅;김영식
    • 대한전자공학회논문지SD
    • /
    • 제46권7호
    • /
    • pp.61-67
    • /
    • 2009
  • 본 논문에서는 0.25-$\mu$m 디지털 CMOS공정으로 제작된 UHF대역 RFID를 위한 무선통신용 쿼드러처(Quadrature) 출력이 가능한 Integer-N방식의 PLL 주파수 합성기를 설계 및 제작하여 측정하였다. Integer-N 방식의 주파수 합성기의 주요 블록인 쿼드러처 전압제어 발진기(Voltage Controeld Oscillator, VCO)와 위상 주파수 검출기(Phase Frequency Detector, PFD), 차지 펌프(Charge Pump, CP)를 설계하고 제작하였다. 전압제어발진기는 우수한 위상노이즈 특성과 저전력 특성을 얻기 위해 LC 공진기를 사용하였으며 전압제어 가변 캐패시터는 P-channel MOSFET의 소스와 드레인 다이오드를 이용하여 설계되었으며 쿼드러처 출력을 위해 두 개의 전압제어발진기를 서로 90도 위상차를 가지도록 설계하였다. 주파수 분주기는 프리스케일러(Pre-scaler)와 아날로그 디바이스사의 칩 ADF4111을 사용하였으며 루프 필터는 3차 RC필터로 설계하여 측정하였다. 측정결과 주파수 합성기의 RF 출력 전력은 50옴 부하에서 -13dBm이고, 위상 잡음은 100KHz offset 주파수에서 -91.33dBc/Hz 이었으며, 동작 주파수영역은 최소 930MHz에서 최대 970MHz이고 고착시간은 약 600$\mu$s이다.