• 한국수자원학회논문집
• /
• 제50권6호
• /
• pp.419-427
• /
• 2017

산지하천 하상에서 흔히 발견되는 호박돌에 작용하는 항력은 하천의 거동과 반응을 예측하는 데 있어서 중요하나 이를 위한 항력계수 연구는 미흡한 실정이다. 본 연구는 호박돌의 항력 실험을 통해서 호박돌 형상과 항력계수의 관계를 분석하였다. 호박돌의 장축과 단축이 흐름방향을 따를 때 항력계수에 미치는 형상계수의 영향을 분석하였다. 항력계수는 장축보다 단축에서 더 크며 호박돌의 등가직경 Reynolds 수가 증가하면 감소하였다. 항력계수와 등가직경 Reynolds 수의 관계에서 결정계수는 단축보다 장축에서 더 크다. 이는 호박돌 형상의 불규칙성에 따른 항력이 축에 따라 변화하기 때문인 것으로 판단된다. 항력분포 변화는 호박돌의 교호진동을 초래하였다. 그 진폭은 $R_{ep}$가 약 12,000에서 급격히 증가하였으며 장축보다 단축에서 더 큰 것으로 나타났다.

• 한국추진공학회지
• /
• 제21권1호
• /
• pp.98-103
• /
• 2017

본 논문은 비행시험의 결과를 이용하여 항력 및 항력감소 분석을 위한 항력계수 산출기법에 대하여 기술하였다. 2차원 탄도운동방정식의 역산을 통하여 비행시험을 이용한 항력계수 산출방법에 대하여 정리하였으며 155 mm 탄의 비행시험을 통하여 이론적인 항력계수와 시험결과로부터 산출된 항력계수를 비교하여 항력계수 산출 기법에 대한 검증을 수행하였다. 항력감소제가 적용된 탄의 비행시험결과를 이용하여 항력계수 산출 및 항력감소 양상을 분석하였다.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.369-376
• /
• 1996

Variations of the drag and lift forces of a circular cylinder in a planar turbulent jet were experimentally investigated. The force was directly measured using the load cell and estimated by integrating the pressure distribution on the cylinder. As the cylinder moves outward from the center of the jet, the direction of lift force changes and the drag force decreases. Reynolds number, the ratio of cylinder's diameter to half width of jet had effect on maximum drag coefficient and the location where the direction of lift changes.

• 한국농공학회지
• /
• 제35권4호
• /
• pp.76-85
• /
• 1993

The purpose of this study was to analyze the wind force distribution on the two single-span arched plastic house depending upon the house spacing and wind direction, which may provide the fundamental criteria for the structural design. In order to specify the wind force distribution, the variation of the wind force coefficients, the mean wind force coefficients and the drag force coefficients were estimated from the wind tunnel test data. The results obtained are as follows : 1. At the wind direction of 90$^{\circ}$, there was a typical span interval at which the maximum negative pressure was occured at the edge of the inside walls. 2. In the consideration of wind loads, the wind force coefficients estimated from independent single-span arched plastic house should not be directly applied to the structural design on the double houses separated. 3. The average maximum negative wind force on the inside walls was occured at the wind direction of 90$^{\circ}$, and the variations depending on the span intervals was not significant. 4. The average maximum drag force was occured at the wind direction of 300, and the magnitude of drag force was more significant at the first house. As the distance between two houses was increased, the drag force was slightly increased for every wind direction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.253-258
• /
• 2001

Control of drag force on a circular cylinder using a detached splitter plate is numerically studied for laminar flow. A splitter plate with the same length as the cylinder diameter(d) is placed horizontally in the wake region. Its position is described by the gap ratio(G/d), where G represents the gap between the cylinder base point and the leading edge of the plate. The drag varies with the gap ratio; it has the minimum value at a certain gap ratio for each Reynolds number. The drag sharply increases past the optimum gap ratio; this seems to be related to the sudden change in the bubble size in the wake region. This trend is consistent with the experimental observation currently available in case of turbulent flow. It is also found that the net drag coefficient significantly depends on the variation of base suction coefficient.

• 한국항공우주학회지
• /
• 제48권7호
• /
• pp.489-495
• /
• 2020

충격파 터널에서 항력 측정을 위하여 가속도계 기반 시스템을 설계 및 구축하고, 마하 6 유동조건에서 원뿔형 모델의 항력계수를 측정하였다. 항력 측정 시스템의 마찰력을 보정하기 위하여 간단하고 직관적인 교정 방식을 제시하고, 항력 측정 결과를 단순 원뿔형 모델의 전산유체역학 해석 결과와 비교, 분석하였다. 다양한 형상의 지지대를 이용하여 지지대에 의한 항력 측정 간섭 영향을 파악하고 이를 최소화하기 위한 디자인을 제시하였다. 수정된 지지대를 이용하여 항력계수를 측정한 결과, 지지대에 의한 항력계수 오차가 작아지는 것이 확인되었다.

• 한국항공우주학회지
• /
• 제42권7호
• /
• pp.616-621
• /
• 2014

저궤도에서 운용되는 위성은 대기 저항에 의한 연료소모가 크며, 연료소모는 임무수명 및 발사무게에 영향을 미치게 되어 위성 형상에 따른 항력의 예측이 중요하다. 본 논문에서는 직접모사법을 이용하여 파라볼릭 안테나를 탑재한 저궤도 위성의 임무고도의 변화와 받음각에 따른 항력 및 항력 계수의 변화를 살펴보았다. 저궤도의 희박 기체의 거동을 모사하는 직접모사법의 적용성을 검증하기 위해 스타샤인(Starshine) 위성의 비행데이터를 이용하여 고도, 대기와 표면의 상호작용에 따른 항력 계수를 비교하였다. 결론적으로 계산결과로부터 저궤도 위성의 정밀한 궤도수명 계산에 적합한 항력 계수를 도출하였다.

• Wind and Structures
• /
• 제34권1호
• /
• pp.137-149
• /
• 2022

In this paper, the fluctuating lift and drag forces on 5:1 rectangular cylinders with two different geometric scales in three turbulent flow-fields are investigated. The study is particularly focused on understanding the influence of the ratio of turbulence integral length scale to structure characteristic dimension (the length scale ratio). The results show that both fluctuating lift and drag forces are influenced by the length scale ratio. For the model with the larger length scale ratio, the corresponding fluctuating force coefficient is larger, while the spanwise correlation is weaker. However, the degree of influence of the length scale ratio on the two fluctuating forces are different. Compared to the fluctuating drag, the fluctuating lift is more sensitive to the variation of the length scale ratio. It is also found through spectral analysis that for the fluctuating lift, the change of length scale ratio mainly leads to the variation in the low frequency part of the loading, while the fluctuating drag generally follows the quasi-steady theory in the low frequency, and the slope of the drag spectrum at high frequencies changes with the length scale ratio. Then based on the experimental data, two empirical formulas considering the influence of length scale ratio are proposed for determining the lift and drag aerodynamic admittances of a 5:1 rectangular cylinder. Furthermore, a simple relationship is established to correlate the turbulence parameter with the fluctuating force coefficient, which could be used to predict the fluctuating force on a 5:1 rectangular cylinder under different parameter conditions.

• 대한기계학회논문집B
• /
• 제30권3호
• /
• pp.278-286
• /
• 2006

Experiments were conducted to estimate the performance of drag force type vertical axis wind turbine with an opening-shutting rotor. It was operated by the difference in drag force generated on both sides of the blades. The rotational speed was measured by a tachometer in a wind tunnel and the tunnel wind speed was measured by using a pilot-static tube and a micro manometer. The performance test for a prototype was accomplished by calculating power, power coefficient, torque coefficient from the measurement of torque and rpm by a dynamometer controller. Various design parameters, such as the number of blades(B), blade aspect ratio(W/R), angle of blades$(\alpha)$ and drag coefficient acting on a blade, were considered for optimal conditions. At the experiment of miniature model, maximum efficiency was found at N=15, $\alpha=60^{\circ}$ and W/R=0.32. The measured test variables were power, torque, rotational speed, and wind speeds. The data presented are in the form of power and torque coefficients as a function of tip-speed ratio V/U. Maximum power was found in case of $\Omega=0.33$, when the power and torque coefficient were 0.14 and 0.37 respectively. Comparing model test with prototype test, similarity law by advance ratio for vertical axis wind turbine was confirmed.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.144-148
• /
• 1998

Using a test apparatus developed Lrt the laboratory, frictional characteristics of natural rubbers have been analyzed by experimental study. Friction coefficient has been calculated from the measured normal force and friction force under various speeds, loads, and temperatures. The relations between the various operating conditions and friction coefficients have been verified. Especially, drag friction due to the visco-elastic behavior of the rubber has been observed in this analysis.