1 |
Park, G., Park, C., Jin, Y., Choi, H., Byun, J. and Hwang, K., "Ethylene Transverse Jets in Supersonic Crossflows," Journal of Propulsion and Power, Vol. 31, No. 3, 2015, pp. 773-788.
DOI
|
2 |
Chang, W. K., Park, G., Jin, Y. and Byun, J., "Shock Impinging Effect on Ethylene Flameholding," Journal of Propulsion and Power, Vol. 32, No. 5, 2016, pp. 1230-1239.
DOI
|
3 |
Chang, E. W. K., Yang, S., Park, G. and Choi, H., "Ethylene Flame-holding in Double Ramp Flows," Aerospace Science and Technology, Vol. 80, 2018, pp. 413-423.
DOI
|
4 |
Park, G., Byun, J., Choi, H., Jin, Y., Park, C. and Hwang, K., "High Speed Propulsion System Test Research Using a Shock Tunnel," Journal of the Korean Society of Propulsion Engineers, Vol. 18, No. 5, 2014, pp. 43-53.
DOI
|
5 |
Kim, K., Park, G. and Jin, S., "Flameholding Characteristics of Ethylene-fueled Model Scramjet in Shock Tunnel," Acta Astronautica, Vol. 161, 2019, pp. 446-464.
DOI
|
6 |
Kim, I., Lee, S., Park, G. and Lee, J. K., "Overview of Flow Diagnosis in a Shock Tunnel," International Journal of Aeronautical and Space Sciences, Vol. 18, No. 3, 2017, pp. 425-435.
DOI
|
7 |
Park, G., Hruschka, R., Gai, S. L. and Neely, A. J., "Flow Establishment Behind Blunt Bodies at Hypersonic Speeds in a Shock Tunnel," Proceeding of SPIE 7126, 28th International Congress on High-Speed Imaging and Photonics, 2008, 71260I.
|
8 |
Vadassery, P., Joshi, D. D., Rolim, T. C. and Lu, F. K., "Design and Testing of an External Drag Balance for a Hypersonic Shock Tunnel," Measurement, Vol. 46, No. 7, 2013, pp. 2110-2117.
DOI
|
9 |
Lee, S., Song, H., Park, G. and Lee, J. K., "Freefalling Heated Sphere in a Shock Tunnel," AIAA Journal, Vol. 55, No. 11, 2017, pp. 3995-3998.
DOI
|
10 |
Park, J., Chang, W. K. and Park, G., "Freefall Force Measurement in a Shock Tunnel," Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 44, No. 6, 2016, pp. 463-467.
DOI
|
11 |
Neely, A. J., West, I., Hruschka, R., Park, G. and Mudford, N. R., "Determining Aerodynamic Coefficients from High Speed Video of a Freeflying Model in a Shock Tunnel," Proceeding of 28th International Congress on High-Speed Imaging and Photonics, Vol. 7126, 2008, 71260H.
|
12 |
Sahoo, N., Mahapatra, D. R., Jagadeesh, G., Gopalakrishnan, S. and Reddy, K. P. J., "An Accelerometer Balance System for Measurement of Aerodynamic Force Coefficients over Blunt Bodies in a Hypersonic Shock Tunnel," Measurement Science and Technology, Vol. 14, No. 3, 2003, pp. 260-272.
DOI
|
13 |
Yang, Y., Kim, I. and Park, G., "Experimental and Numerical Study of Oxygen Catalytic Recombination of SiC-coated Material," International Journal of Heat and Mass Transfer, Vol. 143, 2019, 118510.
DOI
|
14 |
Sahoo, N., Mahapatra, D. R., Jagadeesh, G., Gopalakrishnan, S. and Reddy, K. P. J., "Design and Analysis of a Flat Accelerometer-based Force Balance System for Shock Tunnel Testing," Measurement, Vol. 40, No. 1, 2007, pp. 93-106.
DOI
|
15 |
Lee, S., Oh, B. S., Kim, Y. J. and Park, G., "High-altitude Environment Simulation of Space Launch Vehicle Including a Thruster Module," Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 46, No. 10, 2018, pp. 791-797.
DOI
|
16 |
Song, H., Lee, S., Lee, J. K. and Park, G., "Attitude Angle and Drag Coefficient Measurements of Free-falling Hemisphere Using a Visualization Technique," Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 45, No. 8, 2017, pp. 619-626.
DOI
|
17 |
Jo, S. M., Shim, H., Park, G., Kwon, O. J. and Kim, J. G., "Temperature Determination in a Shock Tube Using Hydroxyl Radical AX Band Emission," Physics of Fluids, Vol. 31, No. 2, 2019, 026109.
DOI
|
18 |
Hong, Z., Davidson, D. F. and Hanson, R. K., "Contact Surface Tailoring Condition for Shock Tubes with Different Driver and Driven Section Diameters," Shock Waves, Vol. 19, No. 4, 2009, pp. 331-336.
DOI
|
19 |
Saravanan, S., Nagashetty, K., Hegde, G. M., Jagadeesh, G. and Reddy, K. P. J., "Schlieren Visualization of Shock Wave Phenomena over a Missile-shape Body at Hypersonic Mach Numbers," Journal of Aerospace Engineering, Vol. 225, No. 1, 2011, pp. 26-34.
|