• Journal of Biosystems Engineering
• /
• 제31권1호
• /
• pp.9-15
• /
• 2006

Draft control is key technique in plow control system for automation of implement control system. To make the consistent draft force is an essential factor for preventing the reduction of working efficiency by tractor's slip and also improving the working efficiency. Therefore, the purpose of this study is to develop the draft sensor for draft control of plow and evaluate the usability of the algorithm of draft control system using proportional control valve. The developed draft control system could extract the draft force very well regardless of draft condition, change of setting draft force and response time in the response characteristic test. The maximum draft force at 3-Point linkage was 10,000 N and the deviation of the control system was 125.8 N in steady state condition. The developed control system worked very well with regard to the change of draft force in field and even in soil condition with soil reaction. The results of experiment showed the characteristics of response was sufficient to be used as the implement draft control system for tractor using proportional valve.

• Journal of Biosystems Engineering
• /
• 제14권4호
• /
• pp.229-241
• /
• 1989

The purposes of this study were to develop an electronic-hydraulic draft control system for tractor implements, to investigate the control performance of the system and the possibility of adaptation to the conventional tractor. Experiments were carried out to investigate the responses of the system to the step and sinusoidal inputs in draft control. The effects of control mode, hydraulic flow rate, reference deadband, and proportional constant on control performance of the system were investigated. Moreover, the effects of filtering signals from draft sensor were also investigated. The following conclusions were derived from the study; 1. In draft control, there were hunting problems in controlling the implement without filtering the draft signals. Filtering was performed by a control program of electronic controller and the control performance and stability of the system were improved significantly. 2. For the draft control system operated on on-off control mode, draft was controlled within ${\pm}27-{\pm}55kg_f$ to the reference draft when the hydraulic flow rates were 5-15 l/min. For the draft control system operated on PWM control, draft was controlled within ${\pm}27kg_f$ to the reference draft regardless of hydraulic flow rates. 3. In the frequency responses of the draft control system, control performance on PWM control mode was not better than on on-off control mode because of characteristics of hydraulic valve and drafe sensor. As the hydraulic flow rates increased for the system operated on on-off control mode, the corner frequency of amplitude attenuation increased, but the corner frequency of phase-angle change remained nearly the same. But, the system was unstable beyond the frequency of 3.1 rad/s. 4. The electronic-hydraulic hitch control system developed in this study showed superior control performance, stability and convenience compared to conventional mechanical-hydraulic hitch control system. It is considered to be a superior replacement for the conventional mechanical-hydraulic hitch control system.

• 한국산업보건학회지
• /
• 제15권1호
• /
• pp.36-44
• /
• 2005

A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank in recent years. Efficiency of push pull hood system is affected by various parameters, such as cross draft, vessel shapes, size of tanks surface, liquid temperature, and so on. Among these, velocity of cross draft might be one of the most influencing factor for determining the ventilation efficiency. To take account of the effect of cross draft velocities over 0.38m/s, a flow adjustment of ${\pm}$20% should be considered into the push and +20% into the pull flow system Although there are many studies about the efficiency evaluation of push pull hood system based on CFDs(Computational Fluid Dynamics) and experiments, there have been no reports regarding the influence of velocities and direction of cross-draft on push-pull hood efficiency. This study was conducted to investigate the influence of cross draft direction and velocities on the capture efficiency of the push-pull ventilation system. Smoke visualization method was used along with mock-up of push-pull hood systems to verify the ventilation efficiency by experiments. When the cross-draft blew from the same origins of the push flows, the efficiency of the system was in it's high value, but it was decreased significantly when the cross-draft came from the opposite side of push flows Moreover, the efficiency of the system dramatically decreased when the cross-draft of open surface tank was faster than 0.4m/s.

• 디자인학연구
• /
• 제15권1호
• /
• pp.81-92
• /
• 2002

Through network draft, it′s possible to describe curve draft with main motive in a lobby loom and to fulfill draft design more conveniently thanks to the development of computer device. Network draft was introduced by Alice Schlein, who is an American weaving artist, and I had ever published research paper on "The unfolding and development of network draft using computer dobby system" . The purpose of the next study was to develop the design of network draft while do make a design network draft in a dobby loom with 16 shafts, and could reach follow conclusion as a result of designing a variety of drafts. The initial of 4-end in a loom with 16 shafts was a basic condition to describe more perfect shape in comparison with draft in 8 shafts through the development of network. The development of draft line was essential to deride the pattern of fabric, and the pattern of draft is decided according to selecting key peg plan. Thereby, could get a variety of draft patterns derive from mix key peg plan with initial selected by developing the kind of draft line and applying diverse key peg plan. As for the variation and diversification of draft line, the shape of patters varied depending col the curve extent and connectivity of draft line and the size of curve. The pattern of network draft can be changed infinitely by free round curve of draft line. In addition, a variety of draft designs shall be developed by increasing the number of shaft, enlarging the scale of draft line, and developing more creative draft line.

• 기본간호학회지
• /
• 제18권4호
• /
• pp.463-471
• /
• 2011

Purpose: The purpose of this study was to develop nursing practice guidelines for water treatment system used in hemodialysis and to evaluate the guidelines by applying them in practice. Method: The first draft for the guidelines was developed based on advice and recommendations obtained from procedure review of critical literature. The draft was modified through evaluation by an expert group and pilot application to practice. The final draft was evaluated by the expert group using the AGREE instrument (Appraisal of Guidelines for Research and Evaluation). Results: For the pilot test using the draft guidelines, 144 samples were collected from the water treatment system and hemodialysis machines. Results showed no bacteria. Endotoxin tests and chemical tests passed the criteria. After revision of the draft guidelines and additions to the draft guidelines, the final draft was confirmed. The quality of the final draft was evaluated by 4 experts using the AGREE instrument. The mean standard score was 76.9% for the 19 items. Conclusion: The clinical guidelines developed in this research can be utilized as systematic and scientific guidelines for water treatment systems used in hemodialysis. In addition, the results of the research can contribute to improving care services.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1353-1360
• /
• 2005

Injection-molded products serve a wide range of applications in our modem lives and their significance is ever increasing. However, difficulty of communication among related companies under the present system results in increase of lead time and decrease of production efficiency. The objective of this paper is the development of a web-based draft verification system in mold design processes. Although several commercial CAD systems offer draft verification functions, those systems are very expensive and inadequate to perform collaborative works. For collaborative work under the distributed environment, the proposed system uses native file transforming of CAD data into optimal format by using the ACIS kernel and InterOp. Functions of draft verification modules are constructed over the ActiveX control using the visual C++ and OpenGL. Therefore, collaborators related to the development of a new product are able to verify the draft and undercut over the Internet without commercial CAD systems. The system helps to reduce production cost, errors and lead-time to the market. Performance of the system is confirmed through various case studies.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.62-65
• /
• 2006

Making a good model is one of the most important aspects in the field of a control system. If one makes a good model, one is now ready to make a good controller for the system. The focus of this thesis lies on system modeling, the draft system in specific. In modeling for a draft system, one of the most common methods is the 'least-square method'; however, this method can only be applied to linear systems. For this reason, the draft system, which is non-linear and a time-varying system, needs a new method. This thesis proposes a new method (the MLS method) and demonstrates a possible way of modeling even though a system has input noise and system noise. This thesis proved the adaptability and convergence of the MLS method.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.14-19
• /
• 2015

Since CAD is advertised 1980s, all across industries have been changed through engineering, manufacturing and inspection. Also marine industry has adopted not only CAD but also various IT systems to make productivity higher. This paper includes research and development to improve traditional draft reading by using IT system, it has focused to build draft database for new vessels, to improve robustness measuring weather condition and to reduce accident possibility.

• 한국중재학회지:중재연구
• /
• 제23권1호
• /
• pp.133-152
• /
• 2013

Recently, the United Nations Commission on International Trade Law (UNCITRAL) has made progress toward resolving low value, high volume disputes in international e-commerce. At the Working Group's 26th session, two draft procedural rules were addressed. The first discussed the draft of Article 9, entitled "Decision by a neutral party." This is based on the suggestion in 26th session to have a "two track" system of ODR, one including negotiation, facilitated settlement, and arbitration phrases, and the other not including an arbitration phase. The second draft procedural rule, draft Article 10, regards the language of proceedings. In most cases of international e-commerce, the decision of language of an ODR proceeding is a matter of importance, for the language parties could differ from each other. This paper examines several implications of UNCITRAL for Korea, which has unstable ODR system.

• 플랜트 저널
• /
• 제14권2호
• /
• pp.39-44
• /
• 2018

본 연구에서는 870 MW 대형 석탄화력 발전소에서 출력을 고정시키고 과잉공기비 조정만으로 통풍계통 안정 및 보일러 효율에 어떠한 변화가 있는지를 분석하였으며 이에 따른 적정 과잉공기비를 선정하였다. 과잉공기비 조정에 따라 공기예열기 압력강하, 유인송풍기 실속여유 등이 변하므로 통풍계통 안정화를 위해 적정 과잉공기비 선정은 반드시 필요하다. 따라서 본 연구에서는 과잉공기비를 통상 운전 값인 1.153에서 운전지침서상의 하한 값인 1.127까지 단계적으로 조정하여 공기예열기 압력강하, 유인송풍기 1차 실속여유, 보일러 효율, 각종 손실 등을 측정하였고 보일러 효율도 동등수준이상으로 유지하면서 통풍계통도 위험수준에서 안전하게 이격시켜 안정화에 기여할 수 있는 적정 과잉공기비를 선정하였다. 적정 과잉공기비는 운전지침서 상의 하한 값인 1.127까지 낮추어 운전하는 것이 바람직하다고 판단된다.