• 제목/요약/키워드: Downstream process

검색결과 328건 처리시간 0.027초

박리-재부착 이후의 재발달 난류경계층 II -난류 모델들에 관한 고찰- (Redeveloping Turbelent Boundary Layer after Separation-Reattachment(II) -A Consideration on Turbulence Models-)

  • 백세진;유정열
    • 대한기계학회논문집
    • /
    • 제13권5호
    • /
    • pp.999-1011
    • /
    • 1989
  • 본 연구의 목적은 첫째, 재발달 경계층에서의 난류에서지 및 난류전단응력에 대한 전달방정식들의 각 항의 측정자료들을 보다 정확히 제시하고 항들간의 균형을 비교 평가함으로써 비평형 유동으로부터 평형유동으로 회복되는 과정을 검토하고, 둘째, 대표적인 난류 모델들로써 표존 k-.epsilon.모델 및 레이놀즈 응력 모델을 사용한 수치계산을 수행함으로써 이와같은 모델들이 비평형 유동을 서술함에 있어 발생될 수 있는 문제점들을 고찰하는데 있다.

고에너지밀도용접 과정에서의 2차원 열유동에 대한 수치해석적 연구 (Numerical Study on the Two-Dimensional Heat Flow in High-Power Density Welding Process)

  • 박건중;장경천;김찬중
    • 대한기계학회논문집B
    • /
    • 제24권9호
    • /
    • pp.1166-1174
    • /
    • 2000
  • This work presents a two-dimensional quasi-steady state model to study the fluid flow and heat transfer in high-power density welding process of thin AISI-304 stainless steel plates. The enthalpy method and the finite volume method were used for a numerical analysis of the mushy region phase change as well as the heat flow at the weld pool and the heat-affected zone. The results show that the mushy region distributed around the weld pool becomes wider downstream and the surface heat losses by convection and radiation can be significant factors in welding process especially when a welding speed is relatively low.

디젤 분무의 분무 형태와 입경 분포에 관한 실험적 연구 (An experimental study on spray pattern and droplet size distribution of diesel spray)

  • 지요한;이종화;김응서
    • 오토저널
    • /
    • 제14권3호
    • /
    • pp.102-108
    • /
    • 1992
  • To clarify the structure of a diesel spray, a transient non-evaporating diesel spray injected under different ambient pressure and different injection pressure was studied. Spray tip penet- ration and spray angle were measured by taking the high speed shadowgraph of spray and Sauter mean Diameter(SMD) was also measured by light scattering technique at different positions along the spray axis and at different time from the start of injection. The effects of the operating parameters on the spray shape and SMD were investigated. By increasing the injection pressure, the spray tip penetration and the spray angle increased and the change of the ambient pressure also resulted in the considerable change in the shape of the spray. The analysis of SMD measurement showed that the atomization is a process that continues in sp- ace and time. As the injection pressure increases SMD decreases rapidly and with the increa- se of the ambient pressure the atomization process ends faster than the lower ambient press- ure and at lower pressure the atomization process continues to much farther downstream and far afterward.

  • PDF

Vortex에 의한 DSI공정 중 혼합효율 향상에 관한 연구 (A Numerical Study of $SO_2$ Efficiency Improvement in the DSI process of FGD)

  • 정진도;김장우
    • 한국분무공학회지
    • /
    • 제14권1호
    • /
    • pp.1-7
    • /
    • 2009
  • This study carried out numerical analysis of flow field of combustion gas and sorbent to test sorbent efficiency of DSI process. To provide rapid mixing for increase utilization rate of sorbent, streamwise vorticity can be introduced into the flowing streams by other means; for example, by installing vortex generators immediately downstream of the wavy trailing edge. Computing results show that the degree of sorbent dispersion depends strongly on duct structure. Highest dispersion efficiency received when vortex generator was installed inside of duct. The results presented in this study a optimum condition for the development of practical DSI process.

  • PDF

화상상관법을 이용한 증발 디젤분무의 구조해석 (Analysis on the Structure of Evaporative Diesel Spray by Using PIV Technique)

  • 염정국;정성식;하종률
    • 한국자동차공학회논문집
    • /
    • 제12권6호
    • /
    • pp.74-79
    • /
    • 2004
  • The effects of change in injection pressure on spray structure have been investigated in high temperature and pressure field. To analyze the structure of evaporative diesel spray is important in speculation of mixture formation process. Also emissions of diesel engines can be controlled by the analyzed results. Therefore, this study examines the evaporating spray structure by using a constant volume vessel. The injection pressure is selected as the experimental parameter, is changed from 72 MPa to 112 MPa with a high pressure injection system(ECD-U2). The PIV(Particle Image Velocimetry) technique was used to capture flow variation of the evaporative diesel spray. A study on the mixture formation process of diesel spray was executed by the results of flow analysis in this study. Consequentially the large-scale vortex flow could be found in downstream spray and the formed vortex governs the mixture formation process in diesel spray.

보염기가 존재하는 덕트형 연소기에서 화염의 동적 특성에 관한 연구 (Analysis of the Flame Dynamic Characteristics in the ducted Combustor with Bluff Body)

  • 정찬영;김태성;송진관;윤영빈
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.351-354
    • /
    • 2012
  • The characteristics of flame dynamics occurring near bluff body was experimentally investigated in a model combustor with V-gutter bluff body. Flashback occurs due to the change of pressure gradient in the combustor, and flashback distance depends on equivalent ratio. Unstable flames can be classified into three types depending on the flashback distance and structure. Re-stabilization takes place as the flame moves downstream. This process is supported by a strong vortex structure behind bluff body.

  • PDF

Applying Quality Function Deployment in the Apparel Industry

  • Diane M. Scheurell;Ph. D.
    • The International Journal of Costume Culture
    • /
    • 제2권2호
    • /
    • pp.14-30
    • /
    • 1999
  • Quality Function Deployment (QFD) is a product development tool used to ensure that the voice of the customer is heard and translated into products. This paper shows the applicability and usefulness of this product development tool in the apparel industry by developing an apparel example and taking it through the four matrices that encompass a QFD process.

  • PDF

Pervaporation Separation of Binary Organic-Aqueous Liquid Mixtures

  • Rhim, Ji-Won;Huang, Robert Y.M.
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1991년도 추계 총회 및 학술발표회
    • /
    • pp.1-3
    • /
    • 1991
  • A novel membrane separation process for the separation of liquid mixture is Pervaporation. The term, 'pervaporation', is a combination of permeation and evaporation, and was first introduced by kober[1] in 1917. In this technique, the liquid mixture in feed is in contact with one side of a dense non-porous membrane and after diffusing through the membrane is removed from the downstream side in the vapor phase, but is usually condensed afterwards to obtain a permeate in liquid from.

  • PDF

DEVELOPMENT OF A REAL-TIME FLOOD FORECASTING SYSTEM BY HYDRAULIC FLOOD ROUTING

  • Lee, Joo-Heon;Lee, Do-Hun;Jeong, Sang-Man;Lee, Eun-Tae
    • Water Engineering Research
    • /
    • 제2권2호
    • /
    • pp.113-121
    • /
    • 2001
  • The objective of this study is to develop a prediction mode for a flood forecasting system in the downstream of the Nakdong river basin. Ranging from the gauging station at Jindong to the Nakdong estuary barrage, the hydraulic flood routing model(DWOPER) based on the Saint Venant equation was calibrated by comparing the calculated river stage with the observed river stages using four different flood events recorded. The upstream boundary condition was specified by the measured river stage data at Jindong station and the downstream boundary condition was given according to the tide level data observed at he Nakdong estuary barrage. The lateral inflow from tributaries were estimated by the rainfall-runoff model. In the calibration process, the optimum roughness coefficients for proper functions of channel reach and discharge were determined by minimizing the sum of the differences between the observed and the computed stage. In addition, the forecasting lead time on the basis of each gauging station was determined by a numerical simulation technique. Also, we suggested a model structure for a real-time flood forecasting system and tested it on the basis of past flood events. The testing results of the developed system showed close agreement between the forecasted and observed stages. Therefore, it is expected that the flood forecasting system we developed can improve the accuracy of flood forecasting on the Nakdong river.

  • PDF