• Korean Journal of Veterinary Research
• /
• v.42 no.3
• /
• pp.403-410
• /
• 2002

This study was performed to investigate the general prepartum behavioral ethogram of Bos taurus coreanae (Hanwoo cow). In this study, 4 pregnant cows were placed in a separate area. We recorded the behaviors of the cows using time lapse VCR for 48 hours and analyzed behaviors with the scan point sampling method. We observed maintenance behaviors, social behaviors and ingestion behaviors. During the observation period, the time budgets of behaviors in order of frequency were LD(lying down, 38.2%), ST(standing, 24.7%), EA(eating, 10.7%), WA(walking, 7.2%), LR(lying down rumination, 5.6%), SR(standing rumination, 3.3%), TW(tail wagging, 3.1%) and SG(self grooming, 1.8%). The time budgets of the other behaviors such as PG(pairwise grooming), FC(fly catching) were negligible (<1%).

• Journal of Environmental Impact Assessment
• /
• v.21 no.6
• /
• pp.879-891
• /
• 2012

The objective of this study was to evaluate seasonal patterns and diel variations of fish movements in the Juksan Weir which was constructed in 2010 at the down-stream of Yeongsan-River watershed. For this study, we monitored day-and-night movement(24 Hr cycle) and seasonal fish migration(June ~ August) patterns in 2011 along with species compositions and abundances depending on the locations of the traps within the fishway. Total number of species sampled was 14 and the total number of individuals was 1,263 with only the size-fractions(as total length) of the fish < 20 cm during the study. Seasonal analysis of fish movement in the fish way showed that highest frequency in the movement occurred in June - July, which is closely associated with a spawning peak season. The most dominant species using the fishway was Squalidus chankaensis tsuchigae, and this species turned out to be 26.9% of the total in the use rate of fishway. Daily monitoring of fish movements showed that most frequent movements occurred between 18:00 PM and 21:00 PM when the fish have a feeding time generally. The migratory fish were not found in the fishway during the study. Mean current velocity during the study $0.42{\pm}0.02ms^{-1}$(n = 42), and there were no significant statistical differences(p > 0.05) among the daily and monthly velocities in the fishway. The use rate of fish passage, in terms of fish species, was 48%, compared with total sampling of fish species(29 species) at the down-river regions during the same period, indicating a low use rate. Further continuous long-term monitoring should be conducted to evaluate the impacts of the weir construction in the river.

• Genomics & Informatics
• /
• v.14 no.4
• /
• pp.196-204
• /
• 2016

Many researchers have found that one of the most important characteristics of the structure of linkage disequilibrium is that the human genome can be divided into non-overlapping block partitions in which only a small number of haplotypes are observed. The location and distribution of haplotype blocks can be seen as a population property influenced by population genetic events such as selection, mutation, recombination and population structure. In this study, we investigate the effects of the density of markers relative to the full set of all polymorphisms in the region on the results of haplotype partitioning for five popular haplotype block partition methods: three methods in Haploview (confidence interval, four gamete test, and solid spine), MIG++ implemented in PLINK 1.9 and S-MIG++. We used several experimental datasets obtained by sampling subsets of single nucleotide polymorphism (SNP) markers of chromosome 22 region in the 1000 Genomes Project data and also the HapMap phase 3 data to compare the results of haplotype block partitions by five methods. With decreasing sampling ratio down to 20% of the original SNP markers, the total number of haplotype blocks decreases and the length of haplotype blocks increases for all algorithms. When we examined the marker-independence of the haplotype block locations constructed from the datasets of different density, the results using below 50% of the entire SNP markers were very different from the results using the entire SNP markers. We conclude that the haplotype block construction results should be used and interpreted carefully depending on the selection of markers and the purpose of the study.

• Journal of Environmental Science International
• /
• v.11 no.8
• /
• pp.793-800
• /
• 2002

Butyltin (BT) compounds were measured in seawater, sediment, sediment core, settling solids, and plankton from Gwangyang Bay in 2001, Tributyltin (TBT) was detected in seawater from 1 out of the 7 seawater sampling sites and in sediment from 18 out of the 35 sediment sampling sites. The highest concentration of TBT was found in the sediment from the site near Yeosu Harbor (53 ng Sn/g dry wt), acting as the point source for TBT The mean concentrations of TBT were in the order of plankton> settling solids> sediment. The degradation indexes ([DBT]+[MBT]/[TBT]) for the plankton were less than 1, indicating the possibility of recent inputs of TBT. The indexes for the sediment and settling solids ranged from 1.14 to 8.73. The composition of the BT compounds found in the settling solids was similar to that found in the sediment. The vertical profile of the total BT compounds in the sediment was characterized by an abrupt decline from the surface. However, no butyltin compounds appeared below a depth of 10 cm, corresponding to the 1980s. Accordingly, the current results demonstrated that the levels of all butyltin species in the environment of Gwangyang Bay were relatively lower than those in other polluted coastal areas. The vertical profile also suggested a fairly recent history for the down-core.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.236-248
• /
• 2020

Objectives: The purpose of this study was to evaluate the concentrations of particulate matter generated during coffee roasting and to study various factors affecting the concentrations. Methods: Differences in concentration levels were investigated based on various factors to understand the emission rates of particulate matter over time and to compare the mass and number concentrations according to their size. Sampling was performed in closed laboratories without the operation of air conditioning or ventilation. Optical Particle Sizer(OPS) was used as a measuring device. An OPS measures using a light-scattering method. Sampling was performed for sixty minutes at one-minute intervals. The background concentration was measured for about 30 minutes before starting of coffee roasting. The concentrations of particulate matter generated during coffee roasting were monitored until roasted coffee beans were removed from the roaster and cooled down. Several factors affecting the concentrations of particulate matter were investigated, which includes the origins of green beans, the roasting level, and the input amount of green beans. Results: The results of this study may be summarized as follows: 1) There was no difference in particulate matter concentration levels by the origin of the green beans, but a statistically significant difference in concentration levels by roasting level and the input amount of green beans; The higher the roasting level, the higher was the particulate matter concentration. The more green beans we put in the roaster, the higher were the concentrations; 2) The PM10 mass concentrations increased over time. The average concentration after roasting was higher than the average concentration during roasting; 3) In the distribution of mass and number concentration by particle diameter, the majority of particles was below 2.5 ㎛. Conclusions: Persons who work in roastery cafes can be exposed to high concentrations of particulate matter. Therefore, personal exposure and risk assessment should be conducted for roastery cafe workers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.155-164
• /
• 2014

Local histogram equalization is one of the most popular ways of enhancing the local brightness features of an input image. However, local histogram equalization reveals some problems. First, undesired artifacts are produced by over-enhancing the local features. Second, the enhancement of local features does not always result in global contrast enhancement. To cope with these problems, we propose an illumination driven local histogram equalization method. First, to estimate the illumination information, the proposed method combines the input image and the blurred image produced through the process of the down-sampling and the up-sampling. Next, the proposed method adaptively adjusts the mapping function estimated by the local histogram equalization using the information of the illumination. As a result, the proposed illumination information driven local histogram equalization method simultaneously enhances the global and the local contrast levels while preventing any local artifacts. Experimental results show that the proposed algorithm outperforms the conventional methods on objective and subjective criteria.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.4
• /
• pp.158-167
• /
• 2007

Indirect illumination plays an important role for realistic image synthesis. We present a novel realtime indirect illumination rendering technique using image pyramids. Hundreds of thousands of indirect point light sources are stored into images, and then they hierarchically clustered into quad-tree image pyramids. We also introduce a GPU based top-down and breadth-first traversal of the quad-trees to approximate the illumination with clusters (set of lights). All steps entirely run on the GPU in real-time. Result images demonstrate that our method represents diffuse interreflection, especially a color bleeding effect well. We achieved interactive frame rates of tens to hundreads, without any preprocessing. We can avoid artifacts caused by sampling, and our method is seven times faster than a recently proposed sampling based method.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.2 s.42
• /
• pp.268-281
• /
• 1993

The aquatic quality of the Naktong river after two or three months in June, 1991 with phenol spillage from a electrical factory in Kumi was investigated. The samples were collected at six sites of the Naktong river basin and Kachang and Kongsan lakes. Phenol was not detected from all water samples. Turbidity was very much increased to the down stream in the Naktong river. The BOD and COD values exceeded the 2nd grade(3mg/l) of the Korean standard quality of Environmenal Water Act at the all sampling sites of the Naktong river. Especially, the value of COD at Kaejin (12.5mg/l) was poorly classified as to the 5th grade of water class for the environmental quality standards. Organophosphorous pesticides such as parathion, malathion, fenitrothion and diazinon were investigated but not detected. Diazinon was only detected at the Ilsan bridge(1.42ppb), Okkye stream(6.95ppb), Waekwan bridge(0.32ppb), Gangjung reservior(0.13ppb), Kaejin (0.05ppb). Of the carbamates such as carbanyl, isoprocarb and cabofuran, the carbofuran was detected all sites except tap water, and Kachang and Kongsan lakes. The content of heavy metals such as Cd, Pb, Zn, Fe, Mn, Hg were not exceeding for drinking water standards at the all sampling region, but only mecury was detected from Okkye stream(0.018ppb) and Kaejin (0.09ppb). In the regions of Kachang and Kongsan lakes, the content of heavy meatals were lower than that of reservior of Naktong river.

• Smart Structures and Systems
• /
• v.32 no.3
• /
• pp.135-151
• /
• 2023

Using 3D asphalt pavement surface data, a deep and multiscale network named CrackNet-M is proposed in this paper for pixel-level crack detection for improvements in both accuracy and robustness. The CrackNet-M consists of four function-specific architectural modules: a central branch net (CBN), a crack map enhancement (CME) module, three pooling feature pyramids (PFP), and an output layer. The CBN maintains crack boundaries using no pooling reductions throughout all convolutional layers. The CME applies a pooling layer to enhance potential thin cracks for better continuity, consuming no data loss and attenuation when working jointly with CBN. The PFP modules implement direct down-sampling and pyramidal up-sampling with multiscale contexts specifically for the detection of thick cracks and exclusion of non-crack patterns. Finally, the output layer is optimized with a skip layer supervision technique proposed to further improve the network performance. Compared with traditional supervisions, the skip layer supervision brings about not only significant performance gains with respect to both accuracy and robustness but a faster convergence rate. CrackNet-M was trained on a total of 2,500 pixel-wise annotated 3D pavement images and finely scaled with another 200 images with full considerations on accuracy and efficiency. CrackNet-M can potentially achieve crack detection in real-time with a processing speed of 40 ms/image. The experimental results on 500 testing images demonstrate that CrackNet-M can effectively detect both thick and thin cracks from various pavement surfaces with a high level of Precision (94.28%), Recall (93.89%), and F-measure (94.04%). In addition, the proposed CrackNet-M compares favorably to other well-developed networks with respect to the detection of thin cracks as well as the removal of shoulder drop-offs.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.152-162
• /
• 2003

In this paper, Binary to Quaternary Converter(BQC), Quaternary to Binary Converter(QBC) and Quaternary inverter circuit, which is the basic logic gate, have been proposed based on voltage mode. The BQC converts the two bit input binary signals to one digit quaternary output signal. The QBC converts the one digit quaternary input signal to two bit binary output signals. And two circuits consist of Down-literal circuit(DLC) and combinational logic block(CLC). In the implementation of quaternary inverter circuit, DLC is used for reference voltage generation and control signal, only switch part is implemented with conventional MOS transistors. The proposed circuits are simulated in 0.35 ${\mu}{\textrm}{m}$ N-well doubly-poly four-metal CMOS technology with a single +3V supply voltage. Simulation results of these circuit show 250MHz sampling rate, 0.6mW power consumption and maintain output voltage level in 0.1V.