• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.842-847
• /
• 2007

In this study, for the purpose of estimating the resisting moment of sloped ground based on level ground fall down safety equation in design specification, compute it depends on penetration depth of concrete pile applying modulus of foundation about the angle of internal friction, cohesion, unit weight of soil, classes of the ground, sandy or clay soil, and verify established study using L-Pile Plus13.8. Also, select four cases that characteristics of soil depending on the soil grade is considered and compute the 12m length concrete pile's resisting moment of the ground those angle is changing from $0^{\circ}{\sim}35^{\circ},\;step\;5^{\circ}$. In the result, identify that the resisting moment of ground decreases depending on ground slope. Thus, increasing of penetration depth is required.

• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.80-86
• /
• 2009

The Cu-bearing PFS-700 steel which has yield strength over 700 MPa was developed to replace the existing submarine structural material, HY-100. The PFS-700 steel has a combination of good mechanical properties and superior weldability. Becaus of that, it can be welded without pre-heating. The application of PFS-700 steel to submarine or battle ship will give a great reduction of cost by omitting pre-heating or lowering pre-heat temperature. To develop pre-heating free welding consumables that match and take advantage of PFS-700 steel, new welding consumables have been designed for the GMAW, SAW processes and explosion bulge test(EBT) was conducted to see the reliability of welded structure. All welds were made without pre-heating, and the inter-pass temperature was below $50^{\circ}C$ for SAW50 and $150^{\circ}C$ for GMAW and SAW150. All EBT specimens show over 14% thickness reduction without through-thickness crack or crack propagation to the hole-down area. Tensile properties for all welding conditions show higher(GMAW) or similar values(SAW50, SAW150) to the base metal. Charpy impact values for the weld metal also show 163.5J(GMAW), 95.4J(SAW50) and 69.0J(SAW150), which meet the goal(higher than 50J) of this project.

• The Korean Journal of Physiology and Pharmacology
• /
• v.23 no.6
• /
• pp.529-537
• /
• 2019

Lung cancer is the most common cause of cancer deaths worldwide and several molecular signatures have been developed to predict survival in lung cancer. Increasing evidence suggests that proliferation and migration to promote tumor growth are associated with dysregulated ion channel expression. In this study, by analyzing high-throughput gene expression data, we identify the differentially expressed $K^+$ channel genes in lung cancer. In total, we prioritize ten dysregulated $K^+$ channel genes (5 up-regulated and 5 down-regulated genes, which were designated as K-10) in lung tumor tissue compared with normal tissue. A risk scoring system combined with the K-10 signature accurately predicts clinical outcome in lung cancer, which is independent of standard clinical and pathological prognostic factors including patient age, lymph node involvement, tumor size, and tumor grade. We further indicate that the K-10 potentially predicts clinical outcome in breast and colon cancers. Molecular signature discovered through $K^+$ gene expression profiling may serve as a novel biomarker to assess the risk in lung cancer.

• The Korean Journal of Pain
• /
• v.34 no.4
• /
• pp.447-453
• /
• 2021

Background: Provocative discography (PD) is a test that is useful in diagnosing discogenic pain (DP). In this study, to diagnose DP, we used a posterolateral approach of needle placement and followed pressure criteria laid down by the Spine Intervention Society. The aim was to identify the correlation between magnetic resonance imaging (MRI) findings (desiccation, high intensity zone and change in shape and size of the disc) and the results of PD. Methods: Records of 50 patients who underwent PD for DP were analyzed. A total of 109 PDs were performed, with 54 suspect and 55 control discs. Alternate pain generators were ruled out. Results: A total of 35 suspect discs were positive on PD. The mean disc pressure in the suspect disc was 31.9 ± 7.9 psi (range, 15-44). Of the 50 patients who underwent PD, 35 had positive MRI findings. A significant positive correlation was found only between disc desiccation and discography result (r = 0.6, P < 0.001). Logistic regression analysis revealed that only desiccation successfully predicted the result of discography (OR = 26.5, P < 0.001); a high intensity zone and a disc protrusion/extrusion had an OR 2.3 and 1.24, respectively. Disc desiccation of Pfirmann grade 3 or more had a sensitivity and specificity of 0.93 and 0.64 respectively in identifying painful discs; the positive likelihood ratio was 2.58 while the negative likelihood ratio was 0.11. Conclusions: In patients with DP, disc desiccation is the most useful MRI feature that predicts a painful disc on PD.

• Animal Bioscience
• /
• v.36 no.9
• /
• pp.1327-1335
• /
• 2023

Objective: When evaluating individuals with the same parent and no phenotype by pedigree best linear unbiased prediction (BLUP), it is difficult to explain carcass grade difference and select individuals because they have the same value in pedigree BLUP (PBLUP). However, single step GBLUP (ssGBLUP), which can estimate the breeding value suitable for the individual by adding genotype, is more accurate than the existing method. Methods: The breeding value and accuracy were estimated with pedigree BLUP and ssGBLUP using pedigree and genotype of 408 Hanwoo cattle from 16 families with the same parent among siblings produced by fertilized egg transplantation. A total of 14,225 Hanwoo cattle with pedigree, genotype and phenotype were used as the reference population. PBLUP obtained estimated breeding value (EBV) using the pedigree of the test and reference populations, and ssGBLUP obtained genomic EBV (GEBV) after constructing and H-matrix by integrating the pedigree and genotype of the test and reference populations. Results: For all traits, the accuracy of GEBV using ssGBLUP is 0.18 to 0.20 higher than the accuracy of EBV obtained with PBLUP. Comparison of EBV and GEBV of individuals without phenotype, since the value of EBV is estimated based on expected values of alleles passed down from common ancestors. It does not take Mendelian sampling into consideration, so the EBV of all individuals within the same family is estimated to be the same value. However, GEBV makes estimating true kinship coefficient based on different genotypes of individuals possible, so GEBV that corresponds to each individual is estimated rather than a uniform GEBV for each individual. Conclusion: Since Hanwoo cows bred through embryo transfer have a high possibility of having the same parent, if ssGBLUP after adding genotype is used, estimating true kinship coefficient corresponding to each individual becomes possible, allowing for more accurate estimation of breeding value.

• Geomechanics and Engineering
• /
• v.36 no.1
• /
• pp.51-69
• /
• 2024

Currently, composite lining mountain tunnels in China are generally classified based on the [BQ] method for the surrounding rock grade. Increasingly, tunnel field construction is replicated indoors for scale down model tests. However, the development of analogous materials for model tests of composite lining tunnels with different surrounding rock grades is still unclear. In this study, typical Class III and V surrounding rock analogous materials and corresponding composite lining support materials were developed. The whole processes of excavation-support dynamics of the mountain tunnels were simulated. Data on the variation of deformations, contact pressures and strains on the surrounding rock were obtained. Finally, a comparative analysis between model tests and numerical simulations was performed to verify the rationality of analogous material development. The following useful conclusions were obtained by analyzing the data from the tests. The main analogous materials of Class III surrounding rock are barite powder, high-strength gypsum and quartz sand with fly ash, quartz sand, anhydrous ethanol and rosin for Class V surrounding rock. Analogous materials for rockbolts, steel arches are replaced by aluminum bar and iron bar respectively with both shotcrete and secondary lining corresponding to gypsum and water. In addition, load release rate of Class V surrounding rock should be less than Class III surrounding rock. The fenestration level had large influence on the load sharing ratio of the secondary lining, with a difference of more than 30%, while the influence of the support time was smaller. The Sharing ratios of secondary lining in Class III surrounding rock do not exceed 12%, while those of Class V surrounding rock exceed 40%. The overall difference between the results of model tests and numerical simulations is small, which verifies the feasibility of similar material development in this study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.19-20
• /
• 2023

The pre-qualification system related to floor impact noise is considered ineffective, and thus, the introduction of a post-verification system is being prepared. This is because the performance, which was notarized in the qualification test due to various reasons, was not uniformly confirmed on building construction fields. Industry practitioners perceive that this is due to the influence of factors such as the flatness, levelness and/or thickness of the floor. However, it is very difficult to confirm such facts in a short period of time on the fields, and since the practical application of technology to measure and evaluate quantitatively and the establishment of a system are insufficient, it cannot be said to be a problem that can be brought to the surface. In fact, even when considering the conventional measurement of the dynamic modulus of elasticity, measurements are performed under controlled variables, such as placing a 200mm×200mm buffer material on a flat test-floor. However, in the fields, it is common to lay down larger productions(for example, 900mm×600mm) on the bare floor where significant variables are not controlled, and to construct finishing layers corresponding to the pre-qualified floor system without separately confirming the realization of the dynamic modulus of elasticity in the field conditions. In this study, spatial information of the bare floor on the field was measured and evaluated through a laser scanner. Technical methods for assessing the smoothness, flatness, and thickness of construction surfaces were reviewed, providing key insights for grading the quality of construction based on these criteria. Through further detailed and thorough investigations, it is expected that results suitable for practical application and systematization will be derived.

• Journal of Hospice and Palliative Care
• /
• v.18 no.2
• /
• pp.128-135
• /
• 2015

Purpose: As the National Health Insurance Service (NHIS) began to cover home oxygen therapy (HOT) services from 2006, it is expected that the new services have contributed to overall positive outcome of patients with chronic obstructive pulmonary disease (COPD). We examined whether the usage of HOT has helped slow down the progression of COPD. Methods: We examined hospital claim data (N=10,798) of COPD inpatients who were treated in 2007~2012. We performed ${\chi}^2$ tests to analyze the differences in the changes to respiratory impairment grades. Multiple logistic regression analysis was used to identify factors that are associated with the use of HOT. Finally, a generalized linear mixed model was used to examine association between the HOT treatment and changes to respiratory impairment grades. Results: A total of 2,490 patients had grade 1 respiratory impairment, and patients with grades 2 or 3 totaled 8,308. The OR for use of HOT was lower in grade 3 patients than others (OR: 0.33, 95% CI: 0.30~0.37). The maintenance/mitigation in all grades, those who used HOT had a higher OR than non-users (OR: 1.41, 95% CI: 1.23~1.61). Conclusion: HOT was effective in maintaining or mitigating the respiratory impairment in COPD patients.

• Radiation Oncology Journal
• /
• v.18 no.4
• /
• pp.293-299
• /
• 2000

Purpose :We conducted a prospective non-randomized clinical study to evaluate the efficacy and toxic of the preoperative concurrent chemoradiotherapy for locally advanced unresectable rectal cancer. Materials and Methods: Between January 1995 and June 1998, 37 conecutive patients with locally unresectable advanced rectal cancer were entered into the study. With 3- or 4- fields technique, a total of 45 Gy radiation was delivered on whole pelvis, followed by 5.4 Gy boost to the primary tumor in some cases. Chemotherapy was done at the first and fifth week of radiation with bolus i.v. 5-Fluorouracil (FU) 370$\~$450 mg/m$^{2}$, days 1$\~$5, plus Leucovorin 20 mg/m$^{2}$, days 1$\~$5. OF 37 patients, 6 patients did not receive all planned treatment course (refusal in 4, disease progression in 1, metastasis to lung in 1). Surgical resection was undergone 4$\~$6 weeks after preoperative concurrent chemoradiotherapy. Results :Complete resection rate with negative margins was 94$\%$ (29/31). Complete response was seen in 7 patients (23$\%$) clinically and 2 patients (6$\%$) pathologically. Down staging of tumor occured in 21 patients (68$\%$). Treatment related toxicity was minimal except grade III & IV leukopenia in 2 patients, respectively. Conclusion : Preoperative concurrent chemoradiotherapy in locally advanced rectal cancer was effective in inducing down staging and complete resection rate. Treatment related toxicity was minimal. Further follow up is on-going to determine long term survival following this treatment.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.395-406
• /
• 2009

Fifty four Hanwoo steers in final fattening period were assigned to 3 groups control, top dressed $PROSOL^{(R)}$ as an emulsifier (TP) and DSP group (experimental diet made to down spec of nutrients with $PROSOL^{(R)}$, which is sodium stearoyl-2-lactylate), based on the body weight (647.96${\pm}$41.31 kg) and months of age (27.3${\pm}$0.8 mo), and the experiment was conducted to establish the reasonable fattening method of Hanwoo steers for 91 days. Average daily body gains during trial were 0.94, 0.84 and 0.98 kg in control, TP and DSP, respectively (P=0.011). DDMI/ADG of TP group tend to lightly improving compared to control and DSP group (P=0.692). There was no effect of supplementation of the $PROSOL^{(R)}$ in concentrates on growth rate, feed efficiency and shrinkage in Hanwoo steers during the short final fattening period. MQI from TP and DSP was not different based on the rib-eye area and carcass weight in carcass than that from control. Back fat thickness tended to be thicker than control (P>0.05). Marbling score, texture and maturity for TP and DSP was abundantly to increase compared to control (P<0.003). There was significantly increment in supplemented $PROSOL^{(R)}$ (P<0.0001). The meat quality grade of control, TP and DSP were 2.94, 3.78 and 4.50, respectively. Related to this result, the auction price (carcass/kg) were gained significantly (P<0.003) from control (17,560), TP (18,586) and DSP (19,266 won) so which the monetary return was the highest in DSP and the differences was recognized between TP and DSP. Percentage over 1st grade appeared in control, TP and DSP were 55.4, 88.9 and 100.0%, respectively. These results supported the hypothesis that supplementation of emulsifier improve the marbling score and the carcass quality grade by increased digestibilities of the feed fat in Hanwoo steers in fattening period.