• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1023-1026
• /
• 2005

본 논문에서는 SDR(Software Defined Radio) 시스템을 위한 Digital IF(Intermediate Frequency) Up/Down 변환기를 설계하고 성능을 평가하였다. 설계한 시스템은 AD 변환부, DA 변환부 및 Up-Down conversion 기능을 수행하는 FPGA로 구성된다. AD 변환부는 Analog Device 사의 AD6645를 사용하였으며, DA 변환부는 Analog Device 사의 AD9775를 사용하였다. Up-Down conversion 기능을 수행하는 FPGA부는 샘플된 IF 입력을 혼합기와 NCO에 의해 기저대역(DC)으로 다운 시키는 역할을 하며, 14bit의 기저대역(DC) 신호를 혼합기와 NCO에 의해 IF 출력으로 올려주는 역할을 한다. 이러한 설계는 기존의 아날로그 헤테로다인 방식에 비하여 높은 유연성 및 우수한 성능 향상을 보여준다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.764-768
• /
• 2002

In this paper, a double balanced gilbert cell MMIC mixer was realized in Tachyonics SiGe HBT technology. The fabricated mixer has 17 dB conversion gain, 9.8 dB noise figure, -4.2 dBm output 1 dB compression point, -27 dBc RF to IF isolation, and the good input, output matching characteristics. It draws 10 mA from a 3 V supply. The simulation and the measured results are closer to each other, which confirms accuracy of the model library and reliability of the process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.719-724
• /
• 2006

In this paper, we designed the double conversion down mixer by using Half-LO frequency in 2.3 GHz band. The IF frequency is obtained by supplying two LO frequencies to HEMT in both gate type and resistive type. The proposed mixer uses Half-LO frequency the same way as conventional sub-harmonic mixers. However the proposed one uses fundamental component of Half-LO frequency in first stage instead of using second harmonic components of Half-LO frequency, and the IF frequency is obtained by resistive type mixer in second stage, thereby the proposed mixer can improve linearity in comparison with conventional active mixer. We can verify that the proposed mixer has an conversion loss of 5dBm and IIP3 of 16.25dBm by using 10 dBm Power.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.104-107
• /
• 2000

We designed and implemented the RFIC(RF front-end IC) for DTV(Digital TV) tuner. The DTV tuner RF front-end consists of low noise IF amplifier fur the amplification of 900 MHz RF signal and down conversion mixer for the RF signal to 44MHz IF conversion. The RFIC is implemented on ETRI 0.8u high resistive (2㎘ -cm) and evaluated by on wafer, packaged chip test. The gain and IIP3 of IF amplifier are 15㏈ and -6.6㏈m respectively. For the down conversion mixer gain and IIP3 are 13㏈ and -6.5㏈m. Operating voltage of the IF amplifier and the down mixer is 5V, current consumption are 13㎃ and 26㎃ respectively.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1650-1656
• /
• 2018

Photons generated via spontaneous parametric down-conversion (SPDC) have broad spectrums and suffer from dispersive broadening of the temporal wave packets when they are transmitted through dispersive media. In this paper we theoretically and experimentally study the detailed amount of the temporal broadening of the two-photon wave packets generated via both type-I and type-II SPDC with ${\beta}-BaB_2O_4$ of various lengths, by transmitting them through optical fibers. We interpret the results with respect to the spectral properties of the two-photon wave packets. We believe that our results will contribute to implementing protocols involving long-range distributions of photon pairs.

• Korean Journal of Optics and Photonics
• /
• v.32 no.1
• /
• pp.29-33
• /
• 2021

We have experimentally simulated the violation of the Leggett-Garg inequality (LGI) using a heralded-single-photon source via spontaneous parametric down-conversion (SPDC) in a periodically poled potassium titanyl phosphate (PPKTP) crystal. We measured the polarization fringe as a function of the angle of the linear polarization of the photons, and analyzed the LGI according to n measurement. Simulation results for LGI based on the polarization of the heralded single photon were in good agreement with theoretical calculations.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.7-10
• /
• 2007

최근 이동통신을 이용해 다양한 서비스를 제공하기 위하여 멀티 밴드, 멀티 채널의 송수신기를 단일칩화 하기 위한 연구가 활발히 진행되고 있다. CMOS 집적 회로 기술은 가격 경쟁력이 높고 집적도가 높아 멀티 밴드, 멀티 채널 송수신기를 집적화하기에 적합하다. 그러나 0.18 ${\mu}m$ 이하의 채널 길이를 갖는 CMOS 집적 회로는 1.8 V 이하의 낮은 공급 전압을 제공함으로 높은 이득을 갖는 mixer의 구현이 어렵고, mixer에서 발생되는 2, 3차 상호 변조에 의한 왜곡으로 선형성이 문제가 된다. 이런 문제점을 해결하기 위해서 기능성 능동부하를 적용하여 선형성을 향상한 Direct Conversion Down Mixer를 설계 분석 하였다.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.272-275
• /
• 2004

A balanced single side-band (SSB) mixer employing a sub-harmonic configuration is designed for up and down conversions in K-band. The designed mixer uses anti-parallel diode (APD) pairs to effectively eliminate even harmonics of the local oscillator (LO) spurious signal. To reduce the odd harmonics of LO at the RF port, we employ a balanced configuration for LO. The fabricated chip shows 12$\pm$2dB of conversion loss and image-rejection ratio of about 20dB for down conversion at RF frequencies of 24-27.5GHz. As an up-conversion mode, the designed chip shows 12dB of conversion loss and image-rejection ratio of 20 ～ 25 dB at RF frequencies of 25 to 27GHz. The odd harmonics of the LO are measured below -37dBc.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.193-196
• /
• 2001

To reduce third-order intermodulation distortion(IMD3) generated in the down-conversion process of the mixer, predistortion technique was proposed and its performance was verified fDr Cellular band circuit. This method is based on the fact that down converted IMD3 of a down conversion mixer could be canceled by that of predistortor with a fine tuned vector modulator. Two tone test has been performed at 836 Mhz with 442 KHz separation. The results showed that IM3 level was improved about 16dB and PldB of the mixer was increased 3dB. from the above results, the suggested technique is useful to design the down converters for communication system .

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.55-62
• /
• 2008

Bandpass sampling (BPS) techniques for the direct down-conversion of RF bandpass signals have become an essential technique for software defined radio (SDR), due to their advantage of minimizing the radio frequency (RF) front-end hardware dependency. This paper proposes an algorithm for finding the minimum BPS frequency for simultaneously down-converting multiple RF signals through full permutation over all the valid sampling ranges found for the multiple RF signals. We also present a scheme for reducing the computational complexity resulting from the large scale of the purmutation calculation involved in searching for the minimum BPS frequency. In addition, we investigate the BPS frequency allowing for the guard-band between adajacent down-converted signals, which help lessen the severe requirements in practical implementations. The performance of the proposed method is compared with those of other pre-reported methods to prove its effectiveness.