• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.26-32
• /
• 2020

Concrete recycling is becoming mandatory rather selective due to depletion of constructional materials and increase of concrete waste. Studies on recycling concrete are conducted in various point of view for long time. However, standard or guideline of many countries for the application of recycled aggregate concrete(RAC) has restrictions such as low replacement rate of coarse aggregate and no fine aggregate allowed due to inferior material properties of recycled aggregate. This study intends to figure out the feasibility of casting natural aggregate concrete(NAC) and RAC separately in a structural member. In making RAC, replacement rate of coarse aggregate was 50, 100% in RAC and treatment of interface of two concretes is introduced. RAC treatment of recycled aggregate or inclusion of additives was not done as it can increase embodied energy of concrete work. Double-shear test with uniformly distributed loading was adopted to evaluate shear strength at the interface of two concretes. After curing it was hard to distinguish interface of two concretes. Experimental result revealed that specimen with higher replacement rate showed higher shear-to-compressive strength ratio, which is possibly attributed to coarse aggregate size and roughness of sheared section. Further study on the effect of various parameters is required and subsequent research activity is on-going.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.393-399
• /
• 2016

We have successfully fabricated 3D (3-dimensional) nanostructures of $TiO_2$ coated with a $g-C_3N_4$ layer via hydrothermal and sintering methods to enhance photoelectrochemical (PEC) performance. Due to the coupling of $TiO_2$ and $g-C_3N_4$, the nanostructures exhibited good performance as the higher conduction band of $g-C_3N_4$, which can be combined with $TiO_2$. To fabricate 3D nanostructures of $g-C_3N_4/TiO_2$, $TiO_2$ was first grown as a double layer structure on FTO (Fluorine-doped tin oxide) substrate at $150^{\circ}C$ for 3 h. After this, the $g-C_3N_4$ layer was coated on the $TiO_2$ film at $520^{\circ}C$ for 4 h. As-prepared samples were varied according to loading of melamine powder, with values of loading of 0.25 g, 0.5 g, 0.75 g, and 1 g. From SEM and TEM analysis, it was possible to clearly observe the 3D sample morphologies. From the PEC measurement, 0.5 g of $g-C_3N_4/TiO_2$ film was found to exhibit the highest current density of $0.12mA/cm^2$, along with a long-term stability of 5 h. Compared to the pristine $TiO_2$, and to the 0.25 g, 0.75 g, and 1 g $g-C_3N_4/TiO_2$ films, the 0.5 g of $g-C_3N_4/TiO_2$ sample was coated with a thin $g-C_3N_4$ layer that caused separation of the electrons and the holes; this led to a decreasing recombination. This unique structure can be used in photoelectrochemical applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.965-970
• /
• 2005

In this paper, SPDT Tx/Rx MMIC switch applicable to IEEE 802.11a WLAN systems is designed and fabricated using a specific designed epitaxial layered pHEMT wafer and ETRI's $0.5{\mu}m$ pHEMT switch process. The SPDT switch exhibits a low insertion loss of 0.68dB, high isolation of 35.64dB, return loss of 13.4dB, power transfer capability of 25dBm, and 3rd order intercept point of 42dBm at frequency of 5.8GHz and control voltage of 0/-3V. The comparison of the measured performances with commercial products based on the GaAs pHEMT technology for low voltage operating at ${\pm}$ 3V/0V shows that the return loss is somewhat inferior to the commercial products and insertion loss is compatible with each other however, isolation characteristics are much better than in conventional chips. Based on these performances, we can conclude that the developed SPDT switch MMIC has an enough potential for IEEE802.11a standard 5 GHz-band wireless LAN applications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1738-1742
• /
• 2003

The whole plant of crop maize was chopped and ensiled in double-layered polyethylene bags to determine the influence of residual sugar on the fermentation of lactic acid and aerobic stability by L. buchneri in whole crop maize silage made in airstress condition. There were a total of six treatments used in this experiment as follow: added 25 g de-mineralised water per kg chopped maize serving as control (con), 37.5 g glucose solution containing 12.5 g glucose ($g_1$), 75 g glucose solution containing 25 g glucose ($g_2$), 25 g, L,.buchneri suspension intended for $10^6$ cfu $g^{-1}$ (L.b.), $g_1$+L.b. and $g_2$+L.b. All silos were opened at day 91 after ensiling for measuring the pH values, microbiological enumeration, fermentative products and aerobic stability. The dry matter loss increased significantly (p<0.01) due to inclusion of sugar or L. buchneri. The lower lactic acid concentrations were observed (p<0.01) in silages inoculated with L. buchneri only or in combination with sugar addition than the correspondent uninoculated silages. Compared with control silage, ethanol production was about 3 or 6-fold higher due to addition 12.5 or 25 g glucose per kg chopped maize at ensiling. The silages added with sugar contained less acetic acid concentration (p<0.01) than control, but silages inoculated with L. buchneri showed the contrary effects (p<0.01) at different sugar levels. No butyric acid was found in uninoculated silages, silages inoculated with L. buchneri. producted more propionic acid, 1-propanol and butyric acid. Lactic acid bacteria counts increased markedly (p<0.01) due to inoculation with L. buchneri, whereas it was reduced (p<0.01) by added sugar. No significant difference was observed in count of yeast, but inoculation with L. buchneri shows a decreasing trend. Mould count in all silages was less than 2 (log cfu $g^{-1}$). The added sugar had negative effects on aerobic stability of maize silage made under air-stress conditions, whereas inoculation with L. buchneri improves (p<0.01) the aerobic stability.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.286-290
• /
• 2008

As the number of mobile device users increases, many researches on peer-to-peer(P2P) systems in mobile environments have been carried out. In this paper, we propose a couple of double-layered P2P file sharing systems to overcome the 'flooding' problem in previous mobile P2P systems. We classify peers into two groups, super peers and sub-peers to establish new routing tables. A super peer manages its sub-peers in the systems. The first proposed system partitions the service area into small cells, each of which is a square. Each super peer is located near the center of the square. The second system selects super peers which have the largest number of adjacent peers. As file transmission and file searches are managed mainly by super peers, unnecessary multi-broadcasting could be avoided. The experimental results show that the proposed systems outperform a typical file sharing system in terms of the amount of message traffic with about $1.2{\sim}1.6$ times improvement on the average.

• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.355-362
• /
• 2017

The Nongso tomb of Sunchang was built in a relatively deep place; hence there was little damage from grave robbers. The tomb was completely filled with a large amount of charcoal, and therefore the wooden coffin was excavated in relatively good condition. On the basis of the structure of the tombs, excavated artifacts, and radiocarbon dating results, the tomb is estimated to be from between the late Goryeo and the early Joseon period. The wooden coffin excavated is double-layered structures consisting of an outer coffin and an inner coffin. The outside of the wooden coffin is thickly lacquered and decorated with yellow letters and white motifs. An analysis of the pigments' components revealed that the major component of the letters was gold (Au) and the major component of the motifs was silver (Ag). The coffin lacquer had three layers: a pigment layer, a yellowish-brown layer, and a black layer. The wooden bases of the coffins were painted with a black substance, such as soot, as mineral elements were not detected in the black layer. The yellowish-brown layer is presumed to be refined lacquer. From the analysis of the structure of the layers and pigments, we can estimate the method was adopted for making lacquer for wooden coffin. It is assumed that the method used gold leaf and gold powder. The form of the pigment and the internal structure are likely to be gold leaf, but the shape of the surface letters appears to have been formed using gold powder. This study will serve as important information for understanding lacquer making techniques at the time of the tombs' construction by confirming the making method through reproduction experiments using gold leaf and gold powder.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.145-152
• /
• 2013

As a typical construction material, concrete has been used in building all kinds of structures since the late $19^{th}$ century. Although it was recognized to secure durability as long as the regulations on design and construction have been reasonably complied, the trends of life-shortening and deterioration have frequently occurred due to all kinds of the external effects that have been experienced during the procedures of using the structures. To make matters even worse, deterioration of the concrete structures according to deterioration can not be controlled any more. Finally, the reality is that repair and maintenance are necessary in the maintenance aspect of the concrete structure. In this study, CRM(Chemical Resistance of Laminating Reinforcement Method), which had been developed to reinforce the surface of concrete and specially improve chemical resistance performance, has been applied to enhance the existing repairing and maintenance method. Therefore, the result has been drawn with comparison and analysis of the specimens applied with the general repairing and maintenance method and CRM through a variety of durability test in this study. With the result of the test, durability of the specimen applied with CRM has been more improved than the existing repairing and maintenance method, which is judged as because of the laminating effect due to reinforcement of epoxy impregnated of alkali-resistance fiber and double layered fiber reinforced seat.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.283-288
• /
• 2021

Due to the 4th Industrial Revolution and the Digital Revolution, many changes are being made in the manufacturing method and structure in the field of plastic arts and crafts. Therefore, in this study, we tried to present a new work method suitable for this era by effectively utilizing the digital technology called 3D printer. For this study, first of all, the theoretical background of 3D printing technology was understood, and prior studies on the use cases of 3D printing technology were summarized. Based on this, three types of craft molds were produced using a 3D printer. As a result of the study, there were characteristics that appear respectively depending on the thickness or overlapping of the craft molds using 3D printing technology. First, in the case of the thickness of the craft molds, the thinner the strength, the weaker the strength, but there was an advantage in that it was easier to take out the contents of the molds. However, it was determined that the thick craft molds was stable to contain the dense and heavy material. Second, in the case of overlapping of craft molds, the advantages of both thin and thick molds were obtained as a result of using a double-layered molds. However, there was a disadvantage that the surface of the contents taken out was not smooth, so that post-processing was necessary. In future research, I hope to deal with the material of the filament used in 3D printers.

• English & American cultural studies
• /
• v.9 no.1
• /
• pp.273-295
• /
• 2009

As Oedipa Mass, the heroine of Thomas Pynchon's The Crying of Lot 49, is apparently associated with Oedipus, the hero in Sophocles' tragedy, this paper aims to show some of their similarities in quest theme and plot development as well as in the use of dramatic irony. Oedipus the King opens with a priest's pleas to relieve the Theban people from a plague and the king's promise to rid its cause by avenging the murder of the former king, as told by the oracle. Lot 49 begins as a Los Angeles law firm informs Oedipa that she is named as the executrix in her former lover Inverarity's will to sort out the mogul's estate. Ironically, however, Oedipus' investigation reveals himself to be the very cause of the national disaster, the murderer for whom he searched. Likewise, Oedipa starts her inquiry dedicating herself to make sense out of what Inverarity had left behind, only to find that the legacy was America. Sophocles and Pynchon both employ dramatic irony to provide a controlling principle for plot development in their works. In Oedipus the King, Sophocles creates mounting tension as well as distance between the reader's knowledge and the protagonist's ignorance, compressing the play's action into the moment that Oedipus discovers his real identity. For dramatic irony, however, Pynchon tends to work through authorial comments and utilize allegorical meanings of the characters' names, directing his novel at illuminating Oedipa's discovery of Inverarity's legacy as well as the meaning of Tristero, an underground postal service system. Unlike Oedipus the King that proceeds on a single line of action, Lot 49 develops in esoteric, multi-layered allusions and intricately-interrelated double strains involving Oedipa's roles as executrix and quester. At the end of Sophocles' tragedy, Oedipus stabs his eyes and decides to live in exile, realizing that, blinded, he begot his children through his mother; Oedipa comes to a painful realization that she allowed her former lover to create death-orienting America without her diversity and moral system in old times. As Oedipa now discovers herself through her search for Tristero, her tragic spirit lies in her determination to confront her binary choices between two Americas: transcendence or entropy, the Tristero possibility or Inverarity's America. Ultimately, Oedipa tries to find who will be the bidder for the Tristero forged stamps designated as lot 49, awaiting the auctioneer's cry and the "crying" of a new-born America.

• Conservation Science in Museum
• /
• v.30
• /
• pp.1-22
• /
• 2023

This study aims to document the conservation treatment of the fine-hemp official headgear housed by the National Museum of Korea, and to reconsider its existing name following the restoration of the original form of the damaged cultural heritage asset. The headgear consists of a single inner frame with a vertical line at the front, a single outer frame surrounding the inner frame, and a double-layered headband that spans the circumference of the wearer's head and joins the inner and the outer frames. This study applied a conservation treatment to the men's undyed hemp headgear of the Joseon Dynasty in order to remove contaminants and foreign substances on the surface and repair the partially deteriorated and damaged fabric, thereby restoring and stabilizing the original shape and preparing it for exhibitions. The hemp headgear was sewed both by hand and with a sewing machine. Although its overall composition and style are similar to the same type of official headgear from the Joseon Dynasty, the use of a sewing machine supports the assumption that it was produced in the early 1900s. This study identified similarities between the overall composition and shape of the fully-preserved hemp official headgear and those of the jangbogwan, a type of men's official headgear worn by Confucian scholars as part of their everyday attire, and compared it with the shape of jangbogwan seen in documentary records, illustrations, prior research, and portraits from the Joseon Dynasty, as well as with the characteristics of extant jangbowan artifacts, eventually concluding that it is appropriate to classify and name the headgear as a jangbogwan.