• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.81-91
• /
• 2018

This paper proposes a double line voltage synthesis (DLVS) strategy for three-to-five phase direct matrix converters. In the proposed strategy, the input and expected output voltages are divided into 6 segments and 10 segments, respectively. In addition, in order to obtain the maximum voltage transfer ratio (VTR), the input line voltages and "source key" should be selected reasonably according to different combinations of input and output segments. Then, the corresponding duty ratios are calculated to determine the switch sequences in different segment combinations. The output voltages and currents are still sinusoidal and symmetrical with little lower order harmonics under unbalanced or distorted input voltages by using this strategy. In addition, the common mode voltage (CMV) can be suppressed by rearranging some of the switching states. This strategy is analyzed and studied by a simulation model established in MATLAB/Simulink and an experimental platform, which is controlled by a DSP and FPGA. Simulation and experimental results verify the feasibility and validity of the proposed DLVS strategy.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.937-945
• /
• 1999

In an effort to protect a RBSC(reaction -bonded SiC) tube SiC films from methyltrichlorosilane(MTS) by low pressure chemical vapor deposition were deposited in hydrogen atmosphere on the RBSC(reaction-bonded SiC) substrates over a range of input gas ratio(${\alpha}=P_{H2}/P_{MTS}=Q_{H2}/Q_{MTS}$=1 to 10) and deposition temperatures(T=1050~1300$^{\circ}C$). At the temper-ature of 1250$^{\circ}C$ the growth rate of SiC films increased and then decreased with decreasing the input gas ratio. The microstructure of SiC films was changed from granular type structure exhibiting (111) preferred orientation in the high input gas ratios to faceted columnar grain structure showing (220) in the low input gas ratios. The similar microstructure change was obtained by increasing the deposition temperature. These results were closely related to a change of deposition mechanism. Double layer structure having granular type and faceted ciolumnar grain structure from the manipulation of mechanism. Double layer structure having granular type and faceted columnar grain structure from the manipulation of the input gas ratio without changing the deposition temperatue was successfully fabricated through in -site process.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.142-145
• /
• 2001

In the double-talk situation where both the near-end and far-end signal present, the performance of echo cancellation using the NLMS algorithm is degraded easily since it freezes the adaptation in this situation. To solve this problem, which utilize the correlation function values of input signal instead of the input signal itself, have been proposed. Because this algorithm could be used to adapt the filter's parameters continuously even in the double-talk situation, give good convergence property compared with the NLMS. In this paper, we compare and analyze its performance. The computer simulation was performed and the results showed as that ECLMS algorithms were robust and kept the desirable performance even in the double-talk situation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.28 no.1
• /
• pp.8-14
• /
• 2023

This paper proposes a PFC converter with a double step-up function using an asymmetrical PWM scheme. For the conventional PWM scheme, the input voltage range, which maintains a double step-up function, is limited because the proposed converter has different voltage gains and characteristics when the duty ratio(D) is less than 0.5. The proposed converter has a constant voltage gain regardless of the magnitude of the input voltage and can achieve output voltage balancing by using the asymmetrical PWM scheme. A 1.6-kW prototype of the proposed converter was built and tested to verify the performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2064-2071
• /
• 1998

A new digital clock level translator has been designed in order to produce a clock source of the internal logic circuits. The translator output has 50% duty ratio from small sinusoidal input such as TCXO which oscillates itself in poratable components. The circuit consists of positive and negative comparators, RS latch, charge pump, and reference vol- tage generator. It detects pulse width of the output waveform and feedbacks the control signal to the input com-parator. It detects pulse width of the output waveform and feedbacks the control signal to the input com-parator reference, producing output waveform with valid 50% duty ratio of the digital signal level. The designed level translator can be used as a sampling clock source of ADC, PLL and the colck source of the clock synthesizer. The circuit wasdesigned in a 0.8.mu.m analog CMOS technology with double metal, double poly, and BSIM3 circuit simulation model. From our experimental results, a stable operating characteristics of 50 +3% duty ratio was obtained from the sinusoidal input wave of 370 mV.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.628-633
• /
• 2014

This paper proposes a performance improvement method of the conventional double talk detection method which can operate before convergence of the echo canceller. The proposed method estimates the coefficients of the linear predictive coding(LPC) filter by using the primary input signal. The time-varying threshold for double talk detection is determined based on the LPC filter gain of the primary input signal level. The proposed method can reduce not only false detection rate which means wrong detection of single talk as double talk but also double talk detection delay. Computer simulation was performed using a long-term real speech signals. It is shown that the proposed method improves the conventional method in terms of lowering the false detection rate and shortening the detection delay.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.630-635
• /
• 2008

A dynamic model has been developed to investigate the operability of a single and double-effect solar energy assisted parallel type absorption chiller. In the study, main components and fluid transport mechanism have been modeled. Flow discharge coefficients of the valves and the pumps were optimized for the double-effect mode with solar-heated water circulated. The model was run for the single mode with solar energy supply only and the solar/gas driving double effect mode. And the cases of the double mode with and without the solar energy were compared. From the simulation results, it was found that the present configuration of the chiller is not capable of regulating solution flow rates according to variable solar energy input. And the single mode utilizing the solar energy only is not practical. It is suggested to operate the system in the double mode and the flow rate control system adaptive to variable solar energy input has to be developed.

• Journal of Welding and Joining
• /
• v.25 no.1
• /
• pp.37-41
• /
• 2007

The purpose of this study is to establish the predictive method of angular distortion of the double-sided multi-pass butt weldment achieve it, the behavior of angular distortion in the butt weldment were investigated using comprehensive finite element analyses and experiments. The angular distortion in the multi-pass butt weldment strongly depends on the welding heat input(Q) and the effective bending rigidity of the weld throat. The effective bending rigidity of the first welding pass on the backing side was defined as the function of dimensionless parameter(k) and a bending rigidity of bead-on-plate weldment. Based on the results, the predictive equation for angular distortion of multi-pass butt weldment was proposed and verified by experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1099-1102
• /
• 1996

In this paper, roll/yaw attitude control of spacecraft using a double gimbaled wheel is discussed with two feedback controllers designed. One is a PD controller with no phase difference between roll and yaw control input. The other is a PD controller with a phase lag compensator about the yaw control input. The phase lag compensator is designed as a first order system and a lag parameter is designed for the yaw angle control. There are two case simulations for each controller ; constant disturbance torques and initial errors of nutation at motion. We obtain the results through simulations that steady-state error and rising time of yaw angle are determined by the compensator. Simulation parameters used in this study are the values of KOREASAT F1.

• 전기의세계
• /
• v.26 no.1
• /
• pp.87-90
• /
• 1977

Various simulation techniques were developed in the modeling of biological system during the last decades. Mostly analog and hybrid simulation techniques have been used. The authors chose the Digital Analog Simulation (DAS) technique by using the MIMIC language to simulate the saccadic eye movement system performances on the digital computer. There have been various models presented by many investigators after Young & Stark's sampled-data model. The eye movement model chosen by the authors is Robinson's model III which shows the parallel information processing characteristics clearly to the double-step input stimuli. In the process of simulation, the parameter and constants used were based on the neurophysiological data of the human and animals. The analog model blocks were converted to the corresponding MIMIC block diagrams and programmed into the MIMIC statements. The program was run on the CDC Cyber 72-14 computer. The essential input stimulus was double-step of 5 and 10 degrees, and target durations chosen were 50,100 and 150 msec. The results obtained by the DAS technqiue were in good agreement with analog simulation carried out by other investigators as well as with the experimental human saccadic eye movement responses to double-step target movements.