• 제목/요약/키워드: Double-density

검색결과 734건 처리시간 0.028초

1018 nm 파장의 고출력 Yb 광섬유 레이저 (High-power Operation of a Yb Fiber Laser at 1018 nm)

  • 오예진;박혜미;박종선;박은지;김진필;정훈;김지원;김태형;정성묵;김기혁;양환석
    • 한국광학회지
    • /
    • 제32권5호
    • /
    • pp.209-214
    • /
    • 2021
  • 본 논문에서는 단파장 영역인 1018 nm에서 최고 출력 626 W를 가진 고출력 이터븀(ytterbium, Yb) 첨가 광섬유 레이저에 대해 보고한다. Yb 광섬유 레이저에서 이득률이 낮은 단파장 영역인 1018 nm에서 레이저를 발진시키기 위한 조건을 이론적으로 조사해보고, 광섬유 끝 단단면 조건에 따른 되먹임 신호를 측정하여 안정적인 레이저 발진 조건에 대하여 연구하였다. 그 결과를 바탕으로 제작한 단일 공진기 구조의 Yb 광섬유 레이저 시스템으로부터 729 W의 펌프 출력에서 최고 출력 626 W의 1018 nm 파장 레이저 출력을 안정적으로 얻을 수 있었으며 그때 기울기 효율은 86.6%로 측정되었다. 본 연구에서 얻은 1018 nm 파장의 Yb 광섬유 레이저 결과는 지금까지 국내에서 보고된 1030 nm 이하 단파장에서 발진된 Yb 광섬유 레이저 출력 중 가장 높은 출력이며, 세계적으로도 상용 Yb 광섬유와 광부품을 사용한 결과 중 가장 높은 출력에 해당된다. 그리고 향후 더 높은 출력을 얻기 위한 방법에 대해 논의하고자 한다.

Impact of lattice versus solid structure of 3D-printed multiroot dental implants using Ti-6Al-4V: a preclinical pilot study

  • Lee, Jungwon;Li, Ling;Song, Hyun-Young;Son, Min-Jung;Lee, Yong-Moo;Koo, Ki-Tae
    • Journal of Periodontal and Implant Science
    • /
    • 제52권4호
    • /
    • pp.338-350
    • /
    • 2022
  • Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

$CuGaSe_2$ 단결정 박막 성장과 광전류 특성 (Growth and Photocurrent Properties of $CuGaSe_2$ Single Crystal)

  • K.J. Hong
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
    • /
    • pp.81-81
    • /
    • 2003
  • The stochiometric mixture of evaporating materials for the CuGaSe$_2$ single crystal thin films were prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal CuGaSe$_2$, it was found tetragonal structure whose lattice constant no and co were 5.615$\AA$ and 11.025$\AA$, respectively. To obtains the single crystal thin films, CuGaSe$_2$ mixed crystal was deposited on throughly etched GaAs(100) by the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were 61$0^{\circ}C$ and 45$0^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about 0.5${\mu}{\textrm}{m}$/h. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by pizoelectric scattering in the temperature range 30K to 150K and by polar optical scattering in the temperature range 150K to 293K. The optical energy gaps were found to be 1.68eV for CuGaSe$_2$ single crystal thin films at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation then the constants in the Varshni equation are given by a=9.615$\times$ 10$^{-4}$ eV/K, and $\beta$=335K. From the photocurrent spectra by illumination of polarized light of the CuGaSe$_2$ single crystal thin films. We have found that values of spin orbit coupling ΔSo and crystal field splitting ΔCr was 0.0900eV and 0.2498eV, respectively. From the PL spectra at 20K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be 0.0626eV and the dissipation energy of the acceptor-bound exciton and donor-bound exciton to be 0.0352eV, 0.0932eV, respectively.

  • PDF

PEMFC 전극촉매 Pt/C와 PtCo/C의 촉매 지지체 열화비교 (Comparison of Catalyst Support Degradation of PEMFC Electrocatalysts Pt/C and PtCo/C)

  • 오소형;한유한;정민철;유동근;박권필
    • Korean Chemical Engineering Research
    • /
    • 제61권3호
    • /
    • pp.341-347
    • /
    • 2023
  • PEMFC(Proton Exchange Membrane Fuel Cells)에서 PtCo/C 합금 촉매가 성능이나 내구성에서 우수하여 많이 사용되고 있다. 그러나 높은 전압에서(1.0~1.5 V) 평가되는 촉매 지지체 내구성에 관한 연구는 별로 보고 되지 않았다. 본 연구에서는 PtCo/C 촉매와 Pt/C 촉매에 촉매 지지체 가속 열화 프로토콜을 적용한 후 내구성을 비교하였다. 1.0↔1.5V 전압 변화 사이클 반복 후에 촉매 비활성도(Mass activity)와 전기화학적 활성면적(ECSA), 전기이중층 용량(DLC), Pt 용해와 입자 성장 등을 분석하였다. 전압변화 2,000 사이클 후 PtCo/C 촉매는 Pt/C 촉매에 비해 0.9 V에서 촉매 무게당 전류밀도가 1.5배 이상 감소하였다. 이와 같은 결과는 PtCo/C 촉매의 카본지지체의 열화 속도가 Pt/C 촉매보다 높기 때문이었다. Pt/C 촉매는 PtCo/C 촉매보다 촉매층의 ECSA 감소가 1.5배 이상 높았지만 Pt/C 촉매의 카본 지지체 부식이 작아 I-V 성능 감소가 작았다. PtCo/C 촉매의 고전압 내구성 향상을 위해서는 카본 지지체 내구성 향상이 필수적임을 보였다.

Hot Wall Epitaxy(HWE)에 의한 $AgInSe_2$단결정 박막 성장과 특성에 관한 연구 (The study of growth and characterization of $AgInSe_2$ single crystal thin film by hot wall epitaxy)

  • 홍광준
    • 한국결정성장학회지
    • /
    • 제9권2호
    • /
    • pp.197-206
    • /
    • 1999
  • 수평 전기로에서 $AgInSe_2$다결정을 합성하여 HWE(Hot Wall Epitaxy) 방법으로 $AgInSe_2$ 단결정 박막을 반절연성 GaAs(100) 위에 성장하였다. $AgInSe_2$단결정 박막은 증발원과 기판의 온도를 각각 $610^{\circ}C$, $450^{\circ}C$로 성장하였다. 이때 성장된 단결정 박막의 두께는 3.8$\mu\textrm{m}$였다. 단결정 박막의 결정성의 조사에서 20 K에서 측정한 광발광 스펙트럼은 884.1nm(1.4024eV) 근처에서 excition emission 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 회절곡선(DCXD)의 반폭치(FWHM)도 125arcsec로 매우 작은 값으로 측정되어 최적 성장 조건임을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293K에서 각각 $9.58{\times}10^{22} electron/m^3,\; 3.42{\times}10^{-2}m^2/V{\cdot}s$였다. $AgInSe_2$단결정 박막의 광전류 단파장대 봉우리들로부터 20K에서 측정된 $\Delta$Cr(Crystal field splitting)은 0.12eV, $\Delta$So(spin orbit coupling)는 0.29 eV였다. 20K에서 얻어진 광발광 봉우리들 중에서 881.1nm(1.4071 eV)와 882.4nm(1.4051 eV)는 free exciton$E_x$의 upper polariton과 lower polariton인$E_x^U$$E_x^L$를 의미하며, 884.1nm(1.4024 eV)는 donor-bound exciton emission에 의한 $I_2$봉우리를, 885.9nm(1.3995 eV)는 acceptor-bound exciton emission에 의한 $I_1$ 봉우리를 각각 나타내었다. 또한 887.5nm(1.3970 eV)에서 관측된 봉우리는 DAP(donor-acceptor pair)에 기인하는 광발광 봉우리로 해석되었다.

  • PDF

Hot wall epitaxy법에 의한 MgGa2Se4 단결정 박막 성장과 광학적 특성 (Growth and optical properties for MgGa2Se4 single crystal thin film by hot wall epitaxy)

  • 문종대;홍광준
    • 한국결정성장학회지
    • /
    • 제21권3호
    • /
    • pp.99-104
    • /
    • 2011
  • 단결정 성장을 위한 $MgGa_2Se_4$ 다결정은 수평 전기로에서 합성하였으며, 결정구조는 rhombohedral이고 격자상수 $a_0$는 3.953 ${\AA}$, $c_0$는 38.890 ${\AA}$였다. $MgGa_2Se_4$ 단결정박막은 HWE(Hot Wall Epitaxy) 방법으로 반절연성 GaAs(100)기판에 성장시켰다. 단결정박막의 성장 조건은 증발원의 온도 $610^{\circ}C$, 기판의 온도 $400^{\circ}C$에서 진행되었으며 성장 속도는 0.5 ${\mu}m/h$였다. 단결정박막의 결정성은 이중 결정 x-선 회절곡선의 반폭치와 X-선 회절무늬의 ${\omega}-2{\theta}$로부터 구하여 최적 성장 조건을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293 K에서 각각 $6.21{\times}10^{18}/cm^3$, 248 $cm^2/v{\cdot}s$였다. $MgGa_2Se_4$/SI(Semi-Insulated) GaAs(100) 단결정 박막의 광흡수 스펙트럼을 10 K에서 293 K까지 측정하였다. 광흡수 스펙트럼으로부터 구한 에너지 갭 $E_g(T)$는 varshni 공식 $E_g(T)=E_g(0)=({\alpha}T^2/T+{\beta})$을 잘 만족함을 알 수 있었다. 여기서 $E_g(0)=2.34\;eV$, ${\alpha}=8.81{\times}10^{-4}\;eV/K$, ${\beta}=251\;K$였다.

Ecosysteme de I′Etang de Berre (Mediterranee nord-occidentale) : Caracteres Generales Physiques, Chimiques et Biologiques

  • Kim, Ki-Tai
    • 환경생물
    • /
    • 제22권2호
    • /
    • pp.247-258
    • /
    • 2004
  • Climatological, hydrological and planktonical research studies, measurements of primary production and photosynthetic efficiency from December 1976 to December 1978 have been carried out in two brackish lakes: Lake Etang de Berre and Lake Etang de Vaine located in the French Mediterranean coast, in the region of Carry-le-Rouet located on the north-west Mediterranean near Marseilles, and in fresh water inflows from 4 Rivers (Touloubre, Durance, Arc, Durancole) to Lake Etang de Berre. Physico-chemical parameters were measured for this study: water temperature, salinity, density, pH, alcalinity, dissolved oxygen (% saturation), phosphate, nitrate, nitrite, silicate etc. Diverse biological parameters were also studied: photosynthetic pigments, phaeopigments, specific composition and biomass of phytoplankton, primary pelagic production etc. Climatical factors were studied: air-temperature, solar-radiation, evaporation, direction (including strength) of winds, precipitation and freshwater volume of the four rivers. The changes in Lake ‘Etang de Berre’ ecosystem depend on the quality of the water in the Durance River, and on the effects of seawater near the entrance of the Caronte Canal. The water quality of the lake varies horizontally and vertically as a result of atmospheric phenomena, maritime currents and tides. The distribution of water temperatures is generally heterogeneous. Southeasterly winds and the Northeasterly Mistral wind are important in the origins of circulated and mixed water masses. These winds are both frequent and strong. They have, as a result, a great effect on the water environment of Lake Etang de Berre. In theory, the annual precipitation in this region is well over eight times the water mass of the lake. The water of the Durance River flows into Lake Etang de Berre through the EDF Canal, amounting to 90% of the precipitation. However, reduction of rainfall in dry seasons has a serious effect on the hydrological characteristics of the lake. The temperature in the winter is partially caused by the low temperature of fresh water, particularly that of the Durance River. The hydrological season of fresh and brackish water is about one month ahead of the hydrological season of sea water in its vicinity. The salinity of Lake Etang de Berre runs approximately 3$\textperthousand$, except at lower levels and near the entrance to the Caronte Canal. However, when the volume of the Durance River water is reduced in the summer and fall, the salinity rises to 15$\textperthousand$. In the lake, the ratio of fresh water to sea water is six to one (6:1). The large quantities of seston conveyed by rivers, particularly the Durance diversion, strongly reduce the transparency in the brackish waters. Although the amount of sunshine is also notable, transparency is slight because of the large amount of seston, carried chiefly by Tripton in the fresh water of the Durance River. Therefore, photosynthesis generally occurs only in the surface layer. The transparency progressively increases from freshwater to open seawater, as mineral particles sink to the bottom (about 1.7kg $m^{-2}a^{-1}$ on the average in brackish lakes). The concentration of dissolved oxygen and the rate of oxygen saturation in seawater (Carry-le-Rouet) ranged from 5.0 to 6.0 $m\ell$ㆍ.$1^{-1}$, and from 95 to 105%, respectively. The amount of dissolved oxygen in Etang de Berre oscillated between 2.9 and 268.3%. The monographs of phosphate, nitrate, nitrite and silicate were published as a part of a study on the ecology of phytoplankton in these environments. Horizontal and vertical distributions of these nutriments were studied in detail. The recent diversion of the Durance River into Lake Etang de Berre has effected a fundamental change in this formerly marine environment, which has had a great impact in its plankton populations. A total of 182 taxa were identified, including 111 Bacillariophyceae, 44 Chlorophyceae, and 15 Cyanophyceae. The most abundant species are small freshwater algae, mainly Chlorophyceae. The average density is about $10^{8}$ cells $1^{-1}$ in Lake Etang de Berre, and about double that amount in Lake Etang de Vaine. Differences in phytoplankton abundance and composition at the various stations or at various depths are slight. Cell biovolume V (equivalent to true biomass), plasma volume VP (‘useful’ biomass) and, simultaneously. the cell surface area S and S/V ratio through the measurement of cell dimensions were computed as the parameters of phytoplankton productivity and metabolism. Pigment concentrations are generally very high on account of phytoplankton blooms by Cyanophyceae, Chlorophyceae and Cryptophyceae. On the other hand, in freshwaters and marine waters, pigment concentrations are comparatively low and stable, showing slight annual variation. The variations of ATP concentration were closely related to those of chlorophyll a and phytoplankton blooms only in marine waters. The carbon uptake rates ranged between 38 and 1091 mg$Cm^{-2}d^{-1}$, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2310 mg$Cm^{-2}d^{-1}$, with an average of 810, representing 290 mg$Cm^{-2}$, per year 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2-year period. The values obtained from marine water(Carry-le-Rouet) ranged from 23 to 2 337 mg$Cm^{-2}d^{-1}$, with a weighted average of 319, representing about 110 gCm$^{-2}$ per year. The values in brakish water (Etang de Berre) ranged from 14 to 1778 mg$Cm^{-2}d^{-1}$, with a weighted average of 682, representing 250 mg$Cm^{-2}$ per year and 38 400 tons per year of photosynthesized carbon for the whole lake.

무여과순환수 탱크 이용 Tilapia의 고밀도 사육실험 (High Density Tilapia Culture in a Recirculating Water System without Filter Bed)

  • 김인배
    • 한국수산과학회지
    • /
    • 제16권2호
    • /
    • pp.59-67
    • /
    • 1983
  • 1982년 5월 18일부터 10월21일까지 부산수산대학 양어장에서 Tilapia를 여과조가 없는 순환사육시설에 고밀도로 수용하고 그 성장도, 사료효율, 수질 등 이에 관련되는 문제점 등을 검토하였다. 그리고, 또 이 실험결과에 입각하여 사업적 생산타당성을 아울러 제시하였다. 수질에 있어서는 수온 $22.8{\sim}29.1^{\circ}C$의 범위였고, 암모니아는 일반적으로 10ppm을 약간 넘는 수준이었다. 사육탱크내에서 녹색 plankton을 유지할려고 수차에 걸쳐서 녹색수를 주수하였으나 그때 마다 $2{\sim}3$일 내로 투명해졌다. 이것은 아마 Tilapia의 plankton포식에 의한 것 같고, Tilapia의 고밀도 수용하에서는 녹색수유지는 곤란할 것으로 생각되었다. 사료효율은 처음의 쇠약기를 제외하고는 F.C. $0.9{\sim}l.2$의 범위였고, 평균은 1.1이었다. 이 때 사용한 사료는 일부는 단백질함량 $25\%$의 연구실제조 사료였고 대부분은 동 $39\%$의 시중상품잉어사료였다. 성장중 자체 번식은 완전히 억제되었다. 이것은 밀도효과라고 인정되었으며, 사육중 밀도는 최하 $1m^2$당 10kg 최고 40.7 kg 범위였다. 공간이용효과는 대단히 높았다. 1일순생산이 가장 높았던 제3실험구의 경우는 1일평균 6.206kg 였으므로 연간 1ha당 3235톤의 순생산에 해당된다. 이 때의 평균수온은 $28.4^{\circ}C$였고 암모니아농도는 10ppm정도였다. 총 6개의 실험구중 실험초 $1m^2$당 15kg이상 실어서 사육한 것을 대상으로 사업적 경제성검토를 하였다. 이번 실험에 사용한 시설전부(8탱크 총면적 $56m^2$)를 이용했다고 가정하면 200일 사육에 평균 5,639kg 생산된다고 계산되어 경영적 측면에서도 타당성이 있는 것으로 결론지어졌다.

  • PDF

산민달팽이(Incilaria fruhstorferi) 수정관 내강 상피조직의 계절에 따른 미세구조적 변화 (Ultrastructural Changes of the Vas Deferens Epithelium by Season in a Slug Incilaria fruhstorferi)

  • 장남섭;정계현;한종민
    • 한국동물학회지
    • /
    • 제39권4호
    • /
    • pp.400-409
    • /
    • 1996
  • 산민달팽이(Incilaria fruhstorferi)의 웅성생식기관인 수정란을 봄과 여름 등 계절별로 나누어 관찰한 결과는 다음과 같았다. 산민달팽이 봄개체의 수정관은 0.4mm정도의 근육질로 구성된 관상구조물로, 내강은 3갈래로 갈라져 있고, 전체 모습은 팔랑개비형태와 같았다. 그러나 여름개체인 경우에도 역시 근육질의 관상구조물로 구성되어 있었으나 내강은 4갈래로 갈라져 있었다. 광학현미경 관찰에서 수정란의 내강상피세포는 불규칙한 형태로서, 세포들은 m-b 이중염색에서 강한 methlenophilia를 보이거나, 반응 업는 밝은 부분이 교대로 배열되어 나타나는 현상을 보였다. 그러나 여름개체의 수정관 내강상피세포는 비교적 규칙적인 세포들로 배열되어 있으며 m-b 이중염색체에서 세포들은 강한 methlenophilia를 나타낸 봄개체와는 달리 밝게 관찰되어 서로 다른 양상을 보였다. 전자현미경 관찰에서도 봄개체의 내강세포는 불규칙한 섬모원주상피세포로서 전자밀도는 매우 높아 검게 관찰되고 이들이 소지한 핵도 그 형태가 불규칙하였으며, 세포들은 다양한 크기의 원형 또는 타원형의 공포들로 가득차 있었다. 반면, 여름개체의 내강세포는 키가 큰 섬모원주 상피세포와 섬모원형 상피세포 그리고 불규칙형 세포들로 이루어져 있었는데 세포들은 전자밀도가 낮아서 모두 밝게 관찰되고 포식작용이 활발한 몇 개의 용해소체만이 관찰될 뿐이었다. 또한 수정관의 내강은 계절에 관계없이 모두 각각 400$\mu$m 두께의 두터운 환상근육층으로 둘러싸여 있었는데 특히 여름개체의 환상근육층 사이에는 비교적 타원형의 vesicular cell이 관찰되고, 이들은 m-b이중염색체에서 약한 basophilia를 나타내었다. 그러나 봄개체에서는 vesicular cell 대신 원형의 결과과립들만이 관찰되어 두 개체 사이에 서로 다른 양상을 보였다.

  • PDF

Hot wall epitaxy(HWE) 방법에 의한 CuGaTe$_2$단결정 박막 성장과 특성에 관한 연구 (The study of growth and characterization of CuGaTe$_2$single crystal thin films by hot wall epitaxy)

  • 홍광준;이관교;이상열;유상하;정준우;정경아;백형원;방진주;신영진
    • 한국결정성장학회지
    • /
    • 제10권6호
    • /
    • pp.425-433
    • /
    • 2000
  • 수평 전기로에서 $CuGaTe_2$다결정을 합성하여 HWE 방법으로 $CuGaTe_2$단결정 박막을 반절연성 GaAs (100) 위에 성장하였다. $CuGaTe_2$단결정 박막은 증발원과 기판의 온도를 각각 $670^{\circ}C$, $410^{\circ}C$로 성장하였다. 이때 단결정 박막의 결정성이 10K에서 측정한 광발광 스펙트럼은 954.5 nm(1.2989 eV) 근처에서 exciton emission 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)도 139arcsec로 가장 작게 측정되어 최적 성장 조건임을 알 수 있었다. Hall효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293 K에서 각각 $8.72{\times}10{23}$$\textrm m^3$, $3.42{\times}10^{-2}$ $\textrm m^2$/V.s였다. 상온에서 $CuGaTe_2$단결정 박막의 광흡수 특성으로부터 에너지 띠간격이 1.22 eV였다. Bandedge에 해당하는 광전도도 peak의 온도 의존성은 varshni 관계식으로 설명되었으며, varshni 관계식의 상수값은 $E_g$(0) = 1.3982 eV, $\alpha$ = $4.27{\times}10^{-4}$eV/K, $\beta$ = 265.5K로 주어졌다. $CuGaTe_2$단결정 박막의 광전류 단파장대 봉우리들로부터 10K에서 측정된$\Delta$cr(crystal field splitting)은 0.0791 eV, $\Delta$s.o(spin orbit coupling)는 0.2463 eV였다. 10K에서 광발광 봉우리의 919.8nm(1.3479 eV) free exciton($E_x$), 954.5nm(1.2989 eV)는 donor-bound exciton 인 $I_2(D^0,X)$와 959.5nm(1.2921 eV)는 acceptor-bound exciton 인 $I_1(A_0, X)$이고, 964.6nm(1.2853 eV)는 donor-acceptor pair(DAP) 발광, 1341.9nm(0.9239 eV)는 self activated(SA)에 기인하는 광발광 봉우리로 고찰되었다.

  • PDF