• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2158-2167
• /
• 2018

This paper analyzed the magnetic field produced by the cylindrical stator coils of permanent magnet spherical motor (PMSM). The elliptic equations about the vector magnetic potential were given. Given that the eddy current effects are neglected, the magnet field of the PMSM is regarded as irrotational field, which can be calculated by scalar magnetic potential. The current density of cylindrical stator coil was proposed based on the definition of current density. The expression of current density of stator coil was obtained according to the double Fourier series decomposition and spherical harmonic functions. Then the magnetic flux density for scalar magnetic potential was derived. Further, the influence of different parameters on radial flux density was also analyzed. Finally, the results by the analytical method in this paper were validated by finite element analysis (FEA).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.138-147
• /
• 2007

Recently, framed structure is increasingly being used as apartment structure due to the advantages during remodeling. Therefore, the use of lightweight panel as separating wall is increasing. To construct lightweight panel structures with sound insulation performance appropriate to the conditions of each field, measurement of sound reduction index(SRI) through panel structures should be performed. In this study, measurement of SRI through 46 kinds of panel structures was performed in the condition of various factors such as surface density, air space and absorber. The result showed that SRI of panel structures was generally higher by increasing of surface density. In the case of double panel with no absorber, SRI at below critical frequency was gradually increased according to rise of air space. Double panel with absorber make remarkable improvement in SRI at low frequency, but there is a little difference compared with SRI of double panel with no absorber over critical frequency.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.187-194
• /
• 2005

An analysis of the 1/f or flicker noise in FD n-channel Double Gate SOI MOSFET is proposed. In this paper, the variation of power spectral density (PSD) of the equivalent noise voltage and noise current with respect to frequency, channel length and gate-to-source voltage at various temperatures and exponent $C(i.e\;1/f^c$ is reported. The temperature is varied 125 K from to room temperature. The variation of PSD with respect to channel length down to $0.1{\mu}m$ technology is considered. It is analyzed that l/f noise in FD n-channel Double Gate SOI MOSFET is due to both carrierdensity fluctuations and mobility-fluctuations. But controversy still exits to its origin.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.238-243
• /
• 2013

In this paper, a novel approach for optimized installation and operations of battery energy storage system (BESS) and electric double layer capacitor (EDLC) modules for the renewable energy based intermittent generation is presented for them to be connected with an electric power grid. In order to make use of not merely the high energy density of battery but also the high power density of EDLC modules, it is very useful to devise the hybrid system which combines BESS and EDLC modules. The proposed method adopts the linear programming to calculate the optimized capacity as well as the quadratic programming to transmit the optimal operational signals to BESS and EDLC modules. The efficiency of this methodology will be demonstrated in the experimental study with the real data of wind speed in Texas.

• 연구논문집
• /
• 통권31호
• /
• pp.127-133
• /
• 2001

In chromium electrodeposition, crack is inevitably accompanied by chromium layer. Behavior of crack formation and crack density were different from the plating conditions such as current density, temperature, waveform of applied current and so on. And cracks have an influence on the corrosion resistance of chromium deposit, because corrosion occurs through the network of cracks between deposit and substrate. Therefore, many researches have been achieved in order to remove the cracks in chromium deposit. Formation of double layers, Cr/Cr and Ni/Cr were investigated to increase corrosion resistance of chromium deposit in this study. As pretreatment prior to outer chromium coating, acid pickling and current control method were examined. Cracks in cross-section of each sample were observed with SEM and CASS(Copper modified acetic acid salt spray) test was performed to evaluate corrosion resistance. It was found that corrosion resistance of Cr/Cr and Ni/Cr double layers were superior to Cr or Ni single layer from the results of CASS test.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.288-297
• /
• 2019

The specimens were heat treated at 180℃, 190℃, 200℃, 210℃ and 220℃ to observe the change of the physical properties of the double raschel pile fabric. The density, tensile strength, weight, elongation, dyeing characteristics, fabric surface morphology and cross sectional shape were observed by heat treatment temperature. Compared with untreated samples, weight, density and tensile strength were increased with increasing heat treatment temperature. No increase was observed at 220℃. In the case of elongation, it increased to 190℃ but thereafter it could not be observed. In the case of uprightness of brushed hair, it was observed that the gap between the yarns was narrowed and the density was increased and the straightness of the yarn and pile yarn was improved by widening the heat treatment temperature. As a result, it was observed that the uprightness was remarkably improved and the bulky properties was increased. It was also observed that the increase of the dyeability was observed with increasing the heat treatment temperature.

• Journal of Electrochemical Science and Technology
• /
• 제9권1호
• /
• pp.20-27
• /
• 2018

We describe a redox-enhanced electric double-layer capacitor (EDLC) that turns the electrolyte in a conventional EDLC into an integral, active component for charge storage-charge is stored both through faradaic reactions with soluble redox-active molecules in the electrolyte, and through the double-layer capacitance in a porous carbon electrode. The mixed-redox electrolyte, composed of vanadium and iodides, was employed to achieve high power density. The electrochemical reaction in a supercapacitor with vanadium and iodide was studied to estimate the charge capacity and energy density of the redox supercapacitor. A redox supercapacitor with a mixed electrolyte composed of 0.75 M NaI and 0.5 M $VOSO_4$ was fabricated and studied. When charged to a potential of 1 V, faradaic charging processes were observed, in addition to the capacitive processes that increased the energy storage capabilities of the supercapacitor. The redox supercapacitor achieved a specific capacity of 13.44 mAh/g and an energy density of 3.81 Wh/kg in a simple Swagelok cell. A control EDLC with 1 M $H_2SO_4$ yielded 7.43 mAh/g and 2.85 Wh/kg. However, the relatively fast self-discharge in the redox-EDLC may be due to the shuttling of the redox couple between the polarized carbon electrodes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.235-238
• /
• 1996

An inverted double channel AIGaAs/lnGaAs/GaAs heterostructure grown by LP-MOCVD is demonstrated and discussed. Sheet carrier densities in excess of $4.5{\times}10^{12}cm^{-2}$ at 300K are obtained with a hall mobility of $5010cm^2/V{\cdot}s$. The proposed device with a $1.8{\times}200{\mu}m^2$ gate dimension reveals an extrinsic transconductance as high as 320 mS/mm and a saturation current density as high as 820 mA/mm at 300K. This is the highest current density ever reported for GaAs MODFET's with the same gate length. Significantly improvements on gate voltage swing (up to 3.5 V) and on reverse breakdown voltage (-10V) are demonstrated due to inverted structure.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1989년도 춘계 학술대회지
• /
• pp.114-115
• /
• 1989

• Structural Engineering and Mechanics
• /
• 제4권5호
• /
• pp.541-552
• /
• 1996

This paper is concerned with the structural optimization problem of maximizing the compressive buckling load of orthotropic rectangular plates for a given volume of material. The optimality condition is first derived via variational calculus. It states that the thickness distribution is proportional to the strain energy density contrary to popular claims of constant strain energy density at the optimum. An engineers physical meaning of the optimality condition would be to make the average strain energy density with respect to the depth a constant. A double cosine thickness varying plate and a double sine thickness varying plate are then fine tuned in a one parameter optimization using the Rayleigh-Ritz method of analysis. Results for simply supported square plates indicate an increase of 89% in capacity for an orthotropic plate having 100% of its fibers in $0^{\circ}$ direction.