• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.643-646
• /
• 2002

Experimental study was conducted to reveal the flow mechanism under rotating stall in an axial flow fan. For this study unsteady pressure was measured using high frequency pressure transducers mounted on the casing wall of rotor passage and total pressure fields were measured at the rotor upstream and downstream. The measured pressure signal was analyzed by Wavelet Transform and Double Phase Locked Averaging Technique. From the result of unsteady pressure field of the casing wall, one period of rotating stall was divided into three zones and the flow characteristics on each zone were described in detail. The pressure field was also analyzed in terms of the pressure distribution along pressure side and suction side of blade tip. From the result of total pressure fields at inlet and outlet of the rotor, the useful information on the characteristics of the stall cell in radial direction was provided.

• 한국유체기계학회 논문집
• /
• 제16권1호
• /
• pp.17-23
• /
• 2013

Recently so much attention has been focused on renewable energy and, since its sources to exploit are already almost saturated in the country, the practical alternative to this situation could be a micro-turbine which uses the low head and low flow. From a point of view of local micro-turbine design capacity and manufacturing technology, the problems such as the accumulation of technical skills, the expansion of related industries, the national policy expansion and the turbine efficiency to improve are still vulnerable and it's true that there are also negative views about the economic feasibility, the technicity and the operation management of the micro-turbine. However, if the improvement can be done in technology of low-head double regulation micro-turbine to generate more outputs and the operation management can be reliably realized, the micro-turbine will be re-evaluated as an appliable source of renewable energy, even the output is small, and by a paradigm shift, it could realize a power generation as an economic and rational system.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.432-438
• /
• 2002

In order to design and analyze the performance of an axial-flow pump it is necessary to know the flow deviation, deflection angle and pressure loss coefficient as a function of the angle of incidence for the hydrofoil section in use. Because such functions are unique to the particular section, however, general correlation formulae are not available for the multitude of hydrofoil profiles, and such functions must be generated by either experiment or numerical simulation for the given or selected hydrofoil section. The purpose of present study is to generate design correlations for hydrofoils with double circular arc (DCA) camber by numerical analysis using a commercial code, FLUENT. The cascade configuration is determined by a combination of the inlet blade angle, blade thickness, camber angle, and cascade solidity, and a total of 90 cascade configurations are analyzed in this study. The inlet Reynolds number based on the chord and the inlet absolute velocity is fixed at 5${\times}$10$\^$5/. Design correlations are formulated, based on the data at the incidence angle of minimum total pressure loss. The correlations obtained in this way show good agreement with the experiment data collected at NASA with DCA hydrofoils.

• 한국토양비료학회지
• /
• 제28권2호
• /
• pp.154-159
• /
• 1995

차광의 효과가 있다고 알려져 있는 비닐 하우스내에서의 질소다비재배시 일조부속으로 인한 배추의 가식부위내 $NO_3^-$ 집적량의 변화를 밝히고자 차광정도를 달리한 하우스내에서의 질소수순별 처리를 두어 배추 수량과 가식부위내의 $NO_3^-$ 함량을 분석한 결과, 보비구, 배비구 모두 전일광 조건에 비해 15% 차광조건에서 엽장 엽폭, 엽수, 근장, 근폭 근중 및 수량이 최고에 달했으나 30% 이상의 차광조건에서는 오히려 감소하였다. 배추의 최고 수량은 452g으로서 배비구+차광 15% 처리구에서 나타났다. 전일광조건에서 $NO_3^-$ 집적량이 $4,373mg\;kg^{-1}$으로 높았던 외부중록은 차광처리에 따른 $NO_3^-$ 집적량의 증가폭이 적었으나, $NO_3^-$ 집적량이 $1,159mg\;kg^{-1}$, $212mg\;kg^{-1}$으로 낮았던 내부엽중륵 및 내부엽신은 $3,492mg\;kg^{-1}$, $2,435mg\;kg^{-1}$으로 3배, 11.5배로 상승하였다. 차광조건의 경우 엽신보다는 중륵이 내부보다는 외부 가식부위의 $NO_3^-$ 집적량이 많았으며 외부중륵($4,872mg\;kg^{-1}$) >내부중륵($2363mg\;kg^{-1}$) >외부엽신($1.405mg\;kg^{-1}$) >내부엽신($727mg\;kg^{-1}$)의 순으로 낮았다. 15% 까지의 차광에서 보비구의 가식부위별 $NO_3^-$ 집적량은 지상부 지하부 생육 및 수량과 비례적인 증가를 나타냈으나. 배비구의 경우 가식부위인 지상부, 지하부 및 수량의 증가폭 보다 $NO_3^-$ 집적량 증가가 더 컸고, 30%이상의 차광조건에서는 지상부, 지하부 생육 및 수량은 감소하나 오히려 $NO_3^-$ 집적량은 더욱 급격히 증가하였다. 외부엽 중륵의 경우 배비구는 차광정도에 관계없이 $5,000-6,000mg\;kg^{-1}$ 내외에서 일정한 수준을 유지하였으나 보비구는 차광정도가 증가할수록 $NO_3^-$ 집적량도 증가하였다. 결론적으로 비닐하우스내에서의 과다한 질소시비는 바람직 하지 않으며 중륵이 얇은 신품종 배추의 개발보급과 배추이용시 가식부위중 $NO_3^-$ 집적량이 가장 높은 외부엽 엽신과 중륵 부위의 제거가 바람직하다고 판단되었다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권2호
• /
• pp.127-135
• /
• 2009

A conventional centrifugal pump causes a drastic deterioration of air-water two-phase flow performances even at an air-water two-phase flow condition of inlet void fraction less than 10% in the range of relatively low water flow rate. Then we have developed a two-phase flow centrifugal pump which consists of a tandem arrangement of double rotating cascades and blades of outer cascade have higher outlet angle more than $90^{\circ}$. In design of the two-phase flow pump for various sized and operating conditions, similarity relations of geometric dimensions to hydraulic performances is very useful. The similarity relations of rotational speed, impeller diameter and blade height are investigated for the developed impeller in the present paper. As the results, the similarity law of rotational speed and impeller diameter is clarified experimentally even in two-phase flow condition. In addition, influences of blade height on air-water two-phase flow performances indicate a little difference from the similarity relations.

• Elastomers and Composites
• /
• 제33권1호
• /
• pp.27-36
• /
• 1998

The surface of wiper blade(W/B) rubber was chlorinated by chemical treatment method using the hydrochloric acid(HCI) and sodium hypochlorite(NaOCl). From the results of contact angle measurement, friction coefficient measurement, and ATR-IR spectra, the surface characteristics of chlorinated W/B rubber with time of chlorination were studied. Contact angles for W/B rubber with increasing time of chlorination and chlorine concentration were measured for the water and ethylene glycol. From the results, contact angle fell rapidly with increasing time of chlorination and chlorine concentration, reaching a constant value after about 10min. And the wettability of W/B rubber surface by means of chlorination has been improved. For an unchlorinated W/B rubber, the friction coefficient with time of chlorination decreased from 1.27 to 0.20~0.23 on full chlorination. As the results it was considered that abrasion resistance of W/B rubber surface has been also improved. The values of pH and $Cl^-$ ion concentration in a chlorine treatment solution decreased as the extent of chlorination of W/B rubber surface increased. From the results of ATR-IR spectra, it was observed that C=C double band of W/B rubber surface transformed into C-Cl band, but quantitative determination of the extent of chlorination was not feasible because of the complexity of chlorination reactions.

• 한국유체기계학회 논문집
• /
• 제5권3호
• /
• pp.15-24
• /
• 2002

This paper presents an experimental study on the unsteady flow phenomena such as leakage flow and rotating stall which have influences on the performance and stability of an axial flow fan. For this study, unsteady pressure were measured using high frequency pressure transducers mounted on the easing wall of rotor passage and analyzed by Double Phase-Locked Averaging Technique. As the flow rate was reduced to near stall point, the pressure difference between the pressure and the suction side of the blade was increased especially new the leading edge and the lowest pressure zone of suction side was gradually developed. From the result of unsteady pressure field on the casing wall, one period of rotating stall was divided into three zones and the flow characteristics on each zone were described in detail.

• 열처리공학회지
• /
• 제34권1호
• /
• pp.1-9
• /
• 2021

The martensitic stainless steel has excellent corrosion resistance and higher strength by quenching and tempering heat treatment. It has been widely used as blade material due to these properties. The hardness and impact toughness of martensitic stainless steel depended strongly on tempering temperatures. The 12Cr martensite stainless steel (SS 410) tempered about 540℃ showed temper embrittlement. To know cause of temper embrittlement in terms of phase identification, a detailed analysis of electron diffraction patterns during TEM observations has been carried out on the <110>α-Fe and <113>α-Fe zone axes for temper embrittlement specimen. The double electron diffraction spots at 1/3(211) and 2/3(211) positions were observed. The lattice space between individual diffraction spots was about 3.5 Å and this value coincide with three times to α-bcc lattice space (1.17 Å). The area which found double diffraction spots was judged metastable "zone" similar to the omega phase and induced embrittlement of SS410 material.

• 한국항공우주학회지
• /
• 제36권10호
• /
• pp.969-978
• /
• 2008

선형 캐스케이드 실험장치에서 블레이드간에 주기조건을 만족하면서 적은 개수의 블레이드를 적용하는 것은 실험의 정확도 향상뿐만 아니라 실험수행에 여러 장점을 제공한다. 따라서 본 연구에서는 유로를 캐스케이드 피치의 두 배 넓이로 설정하고 두 개의 블레이드만을 설치하였을 때 주기조건이 얻어지도록 하는 벽면의 형상설계에 관한 연구를 수행하였다. 이를 위하여 주기조건에서 얻어진 블레이드 표면에서의 마하수와 동일한 결과가 얻어지도록 목적함수를 설정하였으며, 설계변수로는 벽면의 형상과 관련이 있는 12개의 변수를 선정하였다. 벽면의 설계를 위하여 기울기 기반의 최적화법을 사용하였으며, 목적함수에 민감한 변화를 나타내는 영역의 조정과 가중치를 사용하였다. 이러한 방식으로 얻어진 결과에서 주기조건과 동일한 유동특성이 얻어질 수 있음을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.121-126
• /
• 2001

An accelerating flow field through a compressor cascade is studied numerically by unsteady computational simulation. The two-dimensional Navier-Stokes equations for compressible flow is used for the study of unsteady high incidence angle flow, with preconditioning scheme to cover the wide range of Mach number and $\kappa-\omega$ model for the turbulent viscous flow analysis. A DCA(double circular arc) compressor blade is accelerated artificially in this study to understand the unsteady effect by comparing the present results with the existing steady-state experimental and computational results. Also, the accelerating flow field during the starting phase of gas turbine is studied with actual experimental data for the understanding of flow field and performance characteristics at off-design condition.