• Advances in pediatric surgery
• /
• 제2권1호
• /
• pp.68-71
• /
• 1996

Esophageal atresia(EA) with a double tracheoesophageal fistula(TEF) is rare. It accounts for only 0.7% of all cases of EA and TEF. A male newborn weighing 2860g was born by normal vaginal delivery at 41 weeks' gestation to a 27-year-old mother who had a normal pregnancy. But immediately developed recurrent choking and respiratory distress. Feeding tube was inserted and chest X ray showed the feeding tube coiled in the proximal pouch(T-2 level). With a preoperative diagnosis of EA and distal TEF, the thoracotomy was performed on the third day of life. At thoracotomy, TEF was proved to be a double fistula. Both fistulas were divided and an esophageal anastomosis was performed. The postoperative course was uncomplicated until the eighth postoperative day when a minor anastomotic leak. The patient was discharged at 103 days of age.

• 한국지열·수열에너지학회논문집
• /
• 제6권1호
• /
• pp.9-16
• /
• 2010

The aim of this study is to verify the performance of water-to-air multi-heat pump system with a vertical U-tube GLHX(U-tube system) and a double tube GLHX(double tube system), which were installed in a school building located in Asan. For analyzing the performance of the GSHP system, we monitored various operating da~ including the water temperature of inlet and outlet of the ground heat exchanger, mass flow rate, and power consumption. Daily average COP of the single U-tube system and the double tube system were 4.5 and 4.2 at cooling mode and were 3.5 and 3.8 at heating mode. As a result, We know that performance of water-to-air multi-heat pump unit is reliable at actual condition operated in a part load conditions for all day.

• 한국태양에너지학회 논문집
• /
• 제21권4호
• /
• pp.63-71
• /
• 2001

This work has been carried out to find the ideal operating conditions for solar vacuum tube collectors which are widely used at present. Various types of solar collectors including a flat plate one were experimentally tested and examined to determine their thermal efficiencies and operating characteristics. Generally, solar vacuum tubes can be classified into two groups according to their design features. Of these, one is characterized by the insertion of a metallic device(such as a finned heat pipe) in an evacuated glass tube for the collection and transportation of solar energy. The other utilizes double glass tubes where the smaller one is contained inside the bigger one and soldered to each other after the small gap between them is evacuated. Both of these solar collectors are designed to minimize convection heat losses by removing the air which is in direct contact with the absorber surface. The performance of the former type can be readily analyzed by applying the relevant correlations developed for flat plate solar collectors. This has been demonstrated in the present study for the case of a solar collector where a heat pipe is inserted in an evacuated tube.

• 설비공학논문집
• /
• 제16권11호
• /
• pp.1092-1100
• /
• 2004

This paper presents the effect of opening configuration on the thermal behavior and air pattern of earth tube system. The earth tube system is a fresh air load reduction system by using underground double floor space for air-conditioning. In order to analyze the effect of opening configuration on thermal performance of this system and air pattern in underground double floor space quantitatively, we used a model dealing with tree-dimensional profile of wind velocity and temperature in underground double floor space. In conclusion, it is confirmed that heat exchange of a fresh air is mainly performed with upper and lower wall in underground double floor space, and that heat exchange area increased by installing the opening near the wall.

• 한국군사과학기술학회지
• /
• 제12권6호
• /
• pp.760-767
• /
• 2009

This thesis focuses on the study of high-power, coupled-cavity traveling-wave tube(CCTWT) for radar applications. The CCTWT employed a reentrant double-slot staggered RF cavity structure. Computational analysis of the X-band, double-slot staggered structures is carried out through the use of HFSS code, which solves Maxwell's equations fully in three-dimensions. The non-linear, large-signal performance of CCTWTs are predicted from numerical simulations using a three-dimensional particle-in-cell code, MAGIC3D. With beam voltage set to 12.7~13kV and beam current at 300mA, the CCTWT produces a saturated radiation power of 350~430W, corresponding to an electronic efficiency of 8.9~11.2% and a gain of 23.7~24.2dB within a frequency range of 7.9~8.4GHz.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.212-219
• /
• 2002

In the frontal collision of cars, front parts of cars such as engine rail and side members that are composed of hatted section tubes should absorb most of the collision energy far the passenger compartment not to be deformed. For these reasons the study on the collapse characteristics, maximum crushing load and energy absorption capacity of hatted section tubes are needed. In this study, top hatted section tubes and double hatted section tubes are investigated. The maximum crushing load of hatted section tubes is induced from plastic buckling stress of plates by considering that the hatted section tubes are composed of plates with each different boundary conditions and that its material has a strain hardening effect. On this concept maximum crushing load equations of hatted section tubes are derived and verified by experiments. from the results of experiment, the differences of collapse characteristics between top hatted section tube and double hatted section tube are analysed. And mean crushing loads of hatted section tubes from experiments are compared with other theory.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.571-597
• /
• 2016

A new unified design formula for calculating the composite compressive strength of the axially loaded circular concrete filled double steel tubular (CFDST) short and slender columns is presented in this paper. The formula is obtained from the analytic solution by using the limit equilibrium theory, the cylinder theory and the "Unified theory" under axial compression. Furthermore, the stability factor of CFDST slender columns is derived on the basis of the Perry-Robertson formula. This paper also reports the results of experiments and finite element analysis carried out on concrete filled double steel tubular columns, where the tested specimens include short and slender columns with different steel ratio and yield strength of inner tube; a new constitutive model for the concrete confined by both the outer and inner steel tube is proposed and incorporated in the finite element model developed. The comparisons among the finite element results, experimental results, and theoretical predictions show a good agreement in predicting the behavior and strength of the concrete filled steel tubular (CFST) columns with or without inner steel tubes. An important characteristic of the new formulas is that they provide a unified formulation for both the plain CFST and CFDST columns relating to the compressive strength or the stability bearing capacity and a set of design parameters.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.567-570
• /
• 2006

A numerical study has been carried out for a solar water heater which consists of double skin solar vacuum tubes. Water is heated as it flows through the coaxial fluid conduit inserted in each tube. The space between the exterior of the fluid conduit and the glass tube is tilled with antifreeze solution. This is to facilitate heat transfer from the solar heated absorber surface to water and to prevent the functional problems due to freezing in frigid weather conditions. A one-dimensional steady state model is fully described which will be used to develop three-dimensional model using STAR-CD. These models could be used efficiently in designing double skin solar collector tubes with different geometrical parameters other than those considered in the present analysis. Results show a good agreement when compared with other experimental data demonstrating the reliability of the one-dimensional model employed.

• 복합신소재구조학회 논문집
• /
• 제4권3호
• /
• pp.13-21
• /
• 2013

In this study, uniaxial compression tests were performed to investigates the stress-strain relations of Double Skinned Composite Tubular Columns reinforced with steel tube. The confined concrete has been known as the strength of concrete increases significantly. Specimens reinforced with outer and inner steel tube were tested by uniaxial compression test. To investigate the influence of concrete strength increase by confining conditions in steel tubes, 8 specimens with different thickness of tube, hollowness ratio and concrete strength were tested and compared with other researcher's concrete material model.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.128-133
• /
• 2006

This study is focused on the skill to prevent RIB (Rigid Inflatable Boat) from sinking. For better ability to prevent sinking, single hypalon tube is replaced by double TPU (Thermoplastic Polyurethane) tube that is excellent at frictional wear strength and oil-resisting qualities. High buoyant materials are arranged in empty spaces of ship so that ship's spare buoyancy is increased. And for restoration of stable position of ship, the self-righting system is installed. Aluminium alloy is used for increasing hull strength.