• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.74-80
• /
• 2014

This paper describes the development of the dual-thrust flight motor for enhancing the hit probability of unguided rockets. We designed dual-thrust flight motor by shape modification of the double base propellant with high burning rate, and confirmed the dual-thrust performance by static firing tests. The test results showed the thrust ratio of about 1:7.6 between sustaining phase and boosting phase, and had a quietly normal dual-thrust characteristics. And the results showed that there was not the fire extinction phenomenon of propellant due to the pressure drop.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.138-141
• /
• 2010

A study to reduce the ignition peak pressure of gas generator for the missile launching system was accomplished. The igniter, as the energy release device for igniting the propellant, is aimed at simultaneous ignition of bundled 3-layered propellant grain without unstable burning. In case of our gas generator which must use the double-base propellant with low ignition property, the fast ignition of propellant and reduction of initial peak pressure should be required for the satisfaction of ejection velocity and acceleration condition. By applying MTV ignition charge for the igniter of gas generator, we accomplished all system performance requirements.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.1
• /
• pp.78-85
• /
• 1999

Burning characteristics of solid propellants embedded with four kinds of metal wires(Ag, Cu, Al, Ni-Cr wire) were studied with varying wire diameters(O.10.8 mm) lot N-5 propellant. It was found that the order of the burning rate increment ratio($r_w$/$r_sb$) was Ag wire > Cu wire > Al wire> Ni-Cr wire which was the same as the order of the magnitude of thermal diffusivity. The burning rate increment ratio($r_w$/$r_sb$) of N-5 propellant was less than that of composite Propellant because of the difference of adiabatic flame temperature and flame structure. When Ag, Cu and Al wire having high thermal diffusivity were embedded in N-5 propellant, the plateau and mesa characteristics of the double base propellant were disappeared, but not disappeared in the case of propellant embedded with Ni-Cr wire due to its poor thermal conductivity.

• Clean Technology
• /
• v.22 no.3
• /
• pp.190-195
• /
• 2016

The thermal decomposition of waste energetic materials such as TNT, RDX and composition B in a commercial rotary kiln has previously been carried out. As part of the demilitarization process, the thermal decomposition of homogeneous double base propellant (DB) used in M8 and consisting predominantly of nitrocellulose and nitroglycerine is examined with respect to a number of operating conditions. A single condensed phase reaction with 4 species and 365 gas phase reactions and 59 species are considered. Simulation results show the sensitivity of the thermal decomposition of DB with temperature and velocity. At relatively low velocity with constant inlet hot air temperature, temperature in the rotary kiln was found to be highest, 953 K and 1300 K for cases 3 and 6 respectively. Illustrating that optimum operating temperature can be achieved by controlling the inlet velocity without additional cooling systems.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1994.04a
• /
• pp.23-26
• /
• 1994

130mm D.B. 추진기관의 고온 시험에서 나타난 극심한 이상 연소 현상을 해결하기 위해 미세한 고체 입자들을 연소 가스에 분산시켜 불안정 연소를 억제하는 particulate damping 효과를 연구하였다. 고체 입자로서 효과적인 것으로 알려진 $K_2$$SO_4$. ZrC, Graphite를 CTPB, HTPB 고분자 물질에 충진시켜 epoxide, isocyanate 반응기와 가교 반응을 일으킴으로써 고무상의 탄성체 성질을 갖게 하는 $K_2$$SO_4$/CTPB, ZrC/Graphite/HTPB, ZrC/Graphite/AP/HTPB, ZrC/AP/HTPB 조성의 연소 안정제를 개발하였다. 이 연소 안정제는 외경 17mm, 길이 1000mm의 안정봉 형태로 제작하여 모타의 중심 cavity에 조립한 후 지상 연소 시험을 통하여 성능을 확인하였다. 시험 결과, 조성에 AP를 포함시켜 연소 안정제에 일정한 연소 속도를 부여하여 추진제 grain 연소 동안 고체 입자를 연소 가스에 분산되게 설계한 ZrC/Graphite/AP/HTPB, ZrC/AP/HTPB 조성의 연소 안정제가 불안정 연소 억제에 효과적인 것으로 나타났다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.369-374
• /
• 2011

To solve the combustion instability, especially chuffing phenomena, happened during development process of the drive-away motor that was required for cold launch system of missile, we tried various technical approaches and performed ground firing tests. The supplying content or method of ignition energy, generally that is deeply related with the chuffing phenomena, does not affect suppression of the chuffing, but the addition of 2% ZrC as a damping material is effective to suppress the chuffing. Therefore we could newly experience a special solution of the combustion instability in double base propellant.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.125-128
• /
• 2010

A pyrotechnic igniter with a relatively simple configuration was developed to secure the stable and reliable ignition of the gas generator in space launch vehicles. It was designed not only to provide a sufficient heat flux for the propellant ignition but also to ensure a structural safety under the conditions of very high temperatures and pressures. The burning tests of the igniters have been performed to decide several design parameters, and consequently the performance tests have proved that the pyrotechnic igniter developed in this study meets the design requirements.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.93-98
• /
• 2012

To solve the combustion instability, especially chuffing phenomena, happened during development process of a drive-away motor that was required for cold launch system of missile, various technical approaches have been performed through ground firing tests. The ignition energy or its supply system, generally closely related with the chuffing phenomena, does not affect suppression of the chuffing, but the increase of characteristic length($L^*$) as well as the addition of 2% ZrC as a damping material is effective to suppress the chuffing. Therefore we could have a typical experience on the combustion instability in double base propellant.