• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.193-197
• /
• 2001

This paper presents a novel circuit topology of the double two-switch forward type high frequency transformer linked soft-switching PWM DC-DC power converter with tapped inductor filters that can operate under a condition of the low peak voltage stress across the power semiconductor devices and lowered peak current stress through the transformer for some high power applications. This circuit topology of an interleaved two-switch forward soft-switching power converter is proposed in the order to minimize an idle circulating current due to the tapped inductor filter without of any additional active auxiliary resonant-assisted snubber circuits, such as active resonant DC link snubbers and AC link snubbers, active resonant commutation leg link snubbers. The unique advantages of this power converter are less power circuit components and power semiconductor devices, constant frequency PWM scheme, cost effective configuration and wider soft-switching PWM operation range under PWM power regulations load variations. The practical effectiveness of the proposed soft-switching converter circuit topology is tested by simulations and is proved by experimental results received from the 500W-100kHz breadboard setup.

• Korean Journal of Veterinary Service
• /
• v.40 no.1
• /
• pp.67-70
• /
• 2017

A 4 months old, intact male Shih-tzu was referred to the Veterinary Medical Teaching Hospital of Chungnam National University for evaluation of the cause of cardiac murmur and syncope. Thoracic radiography revealed right-sided cardiomegaly. Echocardiography showed marked hypertrophy of right ventricular free wall and obstruction of right ventricular outflow tract, indicating double chambered right ventricle (DCRV). The dog was medicated with atenolol and sildenafil for DCRV, however, clinical signs did not control by medication. Balloon dilation for DCRV was performed to ameliorate patient's clinical signs. The peak systolic pressure gradient across the obstruction region was decreased and clinical signs was improved by balloon dilation procedure. This is the first case report of balloon dilation for the treatment of canine DCRV in South Korea.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.86-89
• /
• 2002

Blue light activates proton pump, and creates electrical gradient across the plasma membrane and drives $K^{+}$ uptake in stomatal guard cells. In this presentation, we provide evidence for regulatory mechanisms of the pump and the identification of blue light receptor. The pump is shown to be the plasma membrane H$^{+}$- ATPase and is activated through phosphorylation of the C-terminus. Phosphorylation occurred and 14-3-3 protein bound to the phosphorylation site. The binding of 14-3-3 protein was required for the H$^{+}$-ATPase activation. We also found that phot1 phot2 double mutant does not respond to blue light but other mutants respond to blue light by stomatal opening. However, all these mutants are capable of stomatal opening in the presence of fusicoccin, an activator of the H$^{+}$-ATPase. These results suggest that both photl and phot2 act as blue light receptors in guard cells.d cells.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.1008-1017
• /
• 2005

When we develop 2D pattern from replica of human body with small pieces, it is inevitable to have some replica pieces overlapped or departed. In this study, the optimized method of 2D pattern development from the 3D replica pieces was investigated using dress-form. Among six arrangement methods, anchoring two vertexes of a replica to neighboring vertexes of a next replica induces the optimized 2D pattern by evenly distributing stress across the 3D replica pieces. Anchoring neighboring vertexes resulted in automatic widening k overlapping (W & O) the interspaces among replicas of dress-form, thereby stress was distributed more evenly than any other method. W&O arrangement method was verified to be the best by examining the 3D space distribution images between body surface and twelve experimental garments.

• Journal of Chest Surgery
• /
• v.22 no.4
• /
• pp.680-686
• /
• 1989

Supravalvular aortic stenosis may be defined as an obstructive congenital deformity of the ascending aorta which originates just distal to the level of the origin of the coronary arteries. It may occur in several different anatomical form. Three type have been described; the hourglass, the hypoplastic and the membranous type, each term identifying the gross characteristic of the lesion causing by the aortic obstruction. Non cardiovascular condition commonly associated with supravalvular aortic stenosis are mental retardation, facial anomalies, hypercalcemia, etc. The diagnosis can be established preoperatively by left heart catheterization and selective angiography. Recently, we experienced a case of multiple localized supravalvular aortic stenosis involving, just above the sinus Valsalva and just proximal of the innominate artery. The surgical correction which was performed by a vertical incision across the each narrowing of aorta with replacement of diamond shaped double velour Woven Dacron patch under the CPB. He was discharged without any event.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1127-1127
• /
• 2001

The transfer of predictive models using various chemometric techniques has been reported for FTNIR and scanning-grating based NIR instruments with respect relatively dry samples (<10% water). Some of the currently used transfer techniques include slope and bias correction (SBC), direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), finite impulse transform (FIR) and wavelet transform (WT) and application of neural networks. In a previous study (Greensill et at., 2001) on calibration transfer for wet samples (intact melons) across silicon diode array instrumentation, we reported on the performance of various techniques (SBC, DS, PDS, double window PDS (DWPDS), OSC, FIR, WT, a simple photometric response correction and wavelength interpolative method and a model updating method) in terms of RMSEP and Fearns criterion for comparison of RMSEP. In the current study, we compare these melon transfer results to a similar study employing pairs of spectrometers for non-invasive prediction of soluble solid content of peaches.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.331-336
• /
• 2005

With increasing emphasis on non-conventional energy systems and autonomous power generation, development of improved and appropriate generating systems has recently taken on greater significance. This paper describes the performance analysis of a single phase self-excited induction generator (SEIG), suitable for autonomous/standby power systems. The system is also appropriate for wind energy systems and small portable systems. Both windings of the induction machine, the main and the auxiliary, are utilized. One winding will be devoted to the supply excitation current only, by being connected to the excitation capacitor, while the load is connected across the other winding. As the design of excitation, the minimum of self-excited capacitor connected auxiliary winding is determined as the suitable value using a circuit equation of auxiliary winding. For the steady state analysis, the equivalent circuit of the single-phase induction generators is used as a basis for modeling using the double-revolving field theory. The validity of the designed generator system is confirmed by experimental and computed results.

• Proceedings of the KWS Conference
• /
• 1996.05a
• /
• pp.96-98
• /
• 1996

Welding of corner area across the edge is a difficult problem in robotized arc welding system, especially when continuously-welded leakage-proof product is required. This paper presents the methodology of cooperation plan of an arc welding robot and 1 or 2 axis welding manipulators for corner area welding. Welding trajectory for the robot is generated using clothoid curves; symmetrical double clothoid curve or unsymmetrical clothoid curve depending on the nature of the workpiece. The clothoid curve is first formulated for the case of linear type positioning table and then applied to the case of rotary type manipulator. The methodology is then illustrated for practical downhand welding situations.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.921-924
• /
• 2003

A current-voltage relation for Positive Temperature Coefficient of Resistance (PTCR) ceramic was derived and compared with the experimental data. The new current-voltage relation was developed based on Heywangs double Schottky barrier model and a bias distribution across the grain boundary. The voltage limitation V < 4${\Phi}$$\sub$b/ suggested by Heywang is no longer necessary in the new expression for the voltage dependence of the resistance. The pulsed voltages were applied to the PTCR ceramic specimen in order to avoid possible temperature variation during the measurement.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.311-314
• /
• 1986

A series of tetramethyl 1-substituted benzyl-3a,7a-dihydro-1H-indole-2,3,3a,4-tetracarboxylates were prepared and their reactions with bromine were examined. The initial reaction seemed to be the formation of the intermediate N-bromo quaternary ammonium bromide. This intermediate underwent aromatization with loss of the 3a-methoxycarbonyl group. Bromine replaced the N-substituent of the p-methoxybenzyl compound and addition of bromine occurred across the $C_6-C_7$ double bond of the indole ring. Bromination of the benzyl ring and aromatization occurred for the m-methoxybenzyl compound.