• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.1-8
• /
• 1994

In this paper, a model of trellis-coded M-ary PSK (TCM/M-PSK) for digital land mobile communication is realized. Bit error rate(BER) of TCM/M-PSK is calculated theoretically in time selective fading environment due to Doppler spread in the presence of AWGN. cochannel interference. These analyses are employed the receiver with post detection diversity and the direct sequence to improve the BER performance of TCM-MPSK system. It is shown that the CNR required by the diversity reception and the direct sequece(process gain=20dB) TCM-4PSK system is reduced to about 25 dB.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.148-148
• /
• 2000

In this paper the IMM(Interacting Multiple model) algorithm using the MGEKF(Modified Gain Extended Kalman Filter) which modes are variances of the process noises is proposed to enhance the performance of maneuvering target tracking with bearing and frequency measurements. The state are composed of relative position, relative velocity, relative acceleration and doppler frequency. The mode probability is calculated from the bearing and frequency measurements. The proposed algorithm is tested a series of computer simulation runs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.126-136
• /
• 1997

When we apply the spectrally efficient quadrature amplitude modulation(QAM) to mobile communications, it is necessary to estimate and compensate the channel charac- teristics. In this paper, a new type fading estimation method for PSAM using sinc function is presented. Gaussian interpolation method has a drawback that the performance degrades rapidly if pilot symbol period increases even though pilot sysbol period is less than Nyquist sampling rate. The Wiener filter method does not degrade until pilot symbol period is equal to the Nyquist sampling rate. It is difficult for Wiener filter method to be applied to real system because autocorrelation function of channel gain, Doppler frequency and SNR(signal to noise ratio) must be known to optimize the filter coefficients. But proposed method has a similar performance to the Wiener filter method, and does not need to know the autocorrelation function of channel gain, the doppler frequency and SNR. Therefore the proposed method cna be applied to real system easily.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.970-976
• /
• 2004

In this paper, we analyze channel estimation algorithms in a RAKE receiver with MRC. There are 3 popular channel estimation algorithms, which are WMSA(Weighted Multi-Slot Averaging) algorithm, EGE(Equal Gain Estimation) algorithm, SSE(Symbol-to-Symbol Estimation) algorithm. We analyze asynchronous IMT-2000(3GPP) which employ 3 different channel estimation algorithms by HP-ADS(Advanced Design System) simulation tool. We used lakes fading channel model for the analysis. from simulation results, we could observe that the performance of WMSA algorithm is better than others in low Doppler effect(3Km/h). However, in the case of high Doppler effect(120km1h), the EGE algorithm is more efficient. In this case the simple estimator with EGE algorithm seems to be more useful.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1734-1741
• /
• 2007

In this paper, the Hybrid SC/MRC-2/4 method in which bit synchronization and phase synchronization were not required was applied to the orthogonal MC DS-CDMA system in which each normalized subcarrier interval and processing gain had the same value, respectively, and the direct sequence spread code of each subcarrier was orthogonal. In the broadband wireless system in which multi-carrier transmission was used, a Doppler frequency shift occurred, which was caused by the difference between the highest subcarrier frequency md the lowest subcarrier frequency. In order to complement phase error caused by the shift, the orthogonal MC DS-CDMA system was analyzed so that the receiving signal could be perfectly synchronized by adjusting the PLL gain suitable for the entire system. As a result of simulations, as the PLL gain was increased, the change in the intervals was close to the case of perfect synchronization however, it became less when the PLL gain reached more than a certain value. Therefore, by selecting a proper PLL gain suitable for the system the orthogonal MC DS-CDMA can be designed in which the Hybrid SC/MRC method is applied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.444-450
• /
• 2004

In mobile communications environment, STBC-OFDM(Space Time Block Code-Orthogonal Frequency Division Multiplexing) system with transmit diversity obtains the MRRC(Maximal Ratio Receiver Combining) diversity gain in time-invariant channel between two received symbols. But in time-variant channel, due to the interference between received symbols, MRRC diversity gain cant be obtained. So, when the mobile device with transmit diversity moves in high speed, the scheme to reduce the performance degradation due to the interference is needed. In this paper, we propose the receiver architecture with advanced transmit diversity, which improves the performance of STBC-OFDM system. The proposed architecture obtains the diversity gain without the change of transmit bandwidth at the receiver with the interference canceller using ZF(Zero Forcing) algorithm. Simulation results show performance improvement as doppler shift is increasing.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.152-157
• /
• 2013

In this paper, we represent the implementation and performance analysis of vector tracking loop based GPS receiver for jamming environment. The vector tracking loop navigation performance is compared by simulation with conventional tracking loop. The simulation results shows that vector tracking loop is more robust than conventional tracking loop in jamming environment. The vector tracking loop can gain 2dB in jamming performance capability over a conventional GPS receiver. Also, Anti-jamming performance of INS Doppler aiding and deep integration method are compared.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.11
• /
• pp.583-588
• /
• 2004

We stabilized the frequency and power of a high voltage excited CW CO2 laser on the peak of the Doppler broadened gain curve using the photoacoustic effect generated from the laser itself. The photoacoustic signal is directly coupled from an radio frequency discharge chamber via a capacitor microphone into a detector and a lock-in stabilizer. The frequency stability is estimated to be better then 1.2×10/sup -7/ at the transition P(20) line. The stabilized output power variation was reduced to from 77 % to 3.3 %.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5C
• /
• pp.506-513
• /
• 2003

Most existing space-time coding (STC) schemes have been developed for flat fading channels. To obtain antenna diversity gain, they rely on channel state information (CSI) required at the receiver through channel estimation techniques. This paper proposes a new decision feedback decoding scheme for Alamouti-based space-time block coding (STBC) transmission over time-selective fading channels. In wireless channels, time-selective fading effects arise mainly due to Doppler shift and carrier frequency offset, Modelling the time-selective fading channels as the first-order Gauss-Markov processes, we use recursive algorithms such as Kalman filtering, LMS and RLS algorithms for channel tracking. The proposed scheme consists of the symbol decoding stage and channel tracking algorithms. Computer simulations confirm that the proposed scheme shows the better performance and robustness to time-selectivity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.519-526
• /
• 2002

In this paper, a microstrip patch array antenna for a Doppler radar at 10.525GHz is desinged and fabricated. To be used for mobile radar system, the antenna is fabricated on a single layer laminate to resist a fire impact and is covered with the Teflon foam. To obtain the desired characteristics, the array antenna is designed 4$\times$8 array using a corporate 3-dB amplitude taper. Also, using square patch elements, the antenna can be converted to a circular polarized antenna later. The designed and fabricated array antenna has the reflection coefficient$({S_11})$ -53.498dB, the horizontal beam width of $10^{\circ}$, the vertical beam width of $18.8^{\circ}$, the gain of 21dBi, the bandwidth of 220MHz for VSWR<1.5 and a side lobe level of less than -17.5dB.