• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.322-325
• /
• 2007

Dent resistance is an important characteristic to avoid damage on automotive outer panels. From a practical point of view, dents can be caused in a number of ways. Considering doors as an example, denting can occur from stone impacts or from the careless opening of an adjacently parked vehicle door. Denting can occur where the door surface is smooth and may not have sufficient curvature to resist dent. These exterior body parts are designed to improve dent resistance using a combination of work hardening and bake hardening. In brief, dent is affected by the shape of the parts and the material properties such as yield strength, strain and thickness. In this work, forming of door outer panel is investigated by Taguchi method. Main parameters are yield strength, thickness, blank size, blank holding force and so on. For the given value of design parameters, forming analysis of the thirty six cases are carried out according to L18 orthogonal array. After comparing the performance by simple conversion of simulation results into dent resistance, the final suggestion of the forming parameters is verified for the best improvement of dent resistance.

• 소성∙가공
• /
• 제24권4호
• /
• pp.280-286
• /
• 2015

Hemming is used to connect two sheet metal components by folding the edge of an outer panel around an inner panel to create a smooth edge. The minimization of hemming defects is critical to the final quality of automobile products because hemming is one of the last operations during fabrication. Designing the hemmed part is not easy and is influenced by the geometry of the bent part. Therefore, the main problem for automotive parts is dimensional accuracy since formed products often deviate geometrically due to large springback. Few numerical approaches using 3-dimensional finite element model have been applied to hemming due to the small element size which is needed to properly capture the bending behavior of the sheet around small die corner and the comparatively big size of automotive opening parts, such as doors, hoods and deck lids. The current study concentrates on the 3-dimensional numerical simulation of hemming for an automotive door. The relationship between the design parameters of the hemming operation and the height difference defect is shown. Quality improvement of the automotive door can be increased through the study of model parameters.

• 대한기계학회논문집A
• /
• 제41권9호
• /
• pp.887-895
• /
• 2017

본 논문에서는 일반적으로 문틀과 문짝을 연결하여 개폐시 작동하는 부품인 힌지의 가속수명시험법에 대한 연구이다. 힌지는 사용하는 용도에 따라 구조와 고장모드가 상이하며 본 연구에서는 전자파 차폐시설에 사용되는 개폐장치 구성품 중 하나인 힌지에 대해서 고장모드를 분석하고 현장작동조건에서의 이론적 검증과 시험장비에 대한 타당성을 분석하였다. 그리고 형상모수와 가속지수의 추정을 통한 특성수명 예측을 위한 가속수명시험법을 설계하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.583-588
• /
• 2004

Opening commercial service of KTX at the time of demanding more flexible train set for HONAM line and JEONLA line, it's necessary for the Korean High speed train, performing the stabilization; to modify the design in aspect of passenger and maintenance. In order to ensure the optimized interior design in Korean High speed train, it is necessary to review the major items such as disabled passenger facility, toilet, seat arrangement, compartment partition and door, access door, electrical cabinet, color and paint through the European standard and compare with other high speed train.

• 소성∙가공
• /
• 제13권2호
• /
• pp.115-121
• /
• 2004

Hemming is the last farming process in stamping and determines external quality of automotive outer panels. Few numerical approaches using 3-dimensional finite element model have been applied to a hemming process due to small element size which is needed to express the bending behavior of the sheet around small die comer and comparatively big model size of automotive opening parts, such as side door, back door and trunk lid etc In this study, part model assembling method is suggested and applied to the 3-dimensional finite element simulation of flanging and hemming process far an automotive front hood.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.103-107
• /
• 2002

The 2nd forming process of flanging/hemming has recently many interest because it determines external quality of automobile. It is difficult to apply finite element simulation in flanging/hemming due to small element size which needs for expression of bending effect on the die corner and big model size of side door, back door, tank lid and like opening Parts. This paper shows the process of flanging/hemming simulation using finite element model for automotive panels. The explicit finite element program PAM-STAMP$\^$TM/ was used to simulate the flanging and hemming operations.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.97-98
• /
• 2022

The purpose of this study is to find out the failure conditions of fire doors in the process of use and prepare maintenance measures against them and find out the failure conditions and failure rates of fire doors according to the period of use of buildings. According to a survey of the failure rate and failure factor of fire doors, the failure rate of fire doors under 5 years was 3.7%, 13.4% of fire doors under 5 years and 10 years, and 14.8% of fire doors under 15 years and 27.6% of fire doors over 20 years. In particular, 15 years later, the failure rate of fire doors exceeded 20%. The main defects were found to be natural aging, holes, opening and closing failures, gaps, and failure and wear of accessories such as gaskets and door closers.

• 소성∙가공
• /
• 제9권6호
• /
• pp.624-630
• /
• 2000

Typical automotive opening parts, i. e. hood trunk lid and door, are made through the press operations such as drawing, trimming, flanging, and hemming. The dimensional accuracy of stamped panels is mainly dependent on the drawing operation. However, the gap between outer panels and opening parts, which is important to the appearance quality of the assembled body, is directly influenced by the flanging and hemming operation. In this study, the relation between the design parameters of the hemming operation and the defect of roll-in is shown. The effects of some design parameters on the gap are examined using CAE. furthermore, the simulated results of the hemmed part of tailgate comer are shown and discussed.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2009년도 춘계학술논문발표회 논문집
• /
• pp.372-378
• /
• 2009

고충건물 피난경로의 제연시스템은 일반적으로 급기가압방식이 널리 쓰인다. 그러나 국내에서 널리 쓰이는 부속실 단독 가압방식은 공간용적이 너무 작아 차압을 형성하고 유지하는 문제와 방연풍속을 형성하는 문제 사이에 늘 불균형이 존재한다. 또한 거실 출입문을 여닫는 데 지장이 없는 차압 하에서도 계단실 출입문은 차압에 밀려 제대로 닫히지 않는 경우가 있을 수 있다. 이런 측면을 역학적으로 검토하고, 과압 해소방식을 제안한다.

• 한국화재소방학회논문지
• /
• 제27권2호
• /
• pp.6-10
• /
• 2013

본 연구는 풍도, 부속실, 거실 그리고 계단실로 구성된 구조물의 제연설비 성능에 관한 연구를 수행하고 급기 가압실의 안전성을 구현하기 위한 실험 자료를 구축하고자 하는데 목적이 있다. 이를 위해서 부속실 가압 및 차압 조절 설비와 방화문의 개폐력 측정 장치를 제작하였다. 본 주제는 부속실의 가압을 위한 설계유량과 폐쇄시 차압이 동일한 경우 방화문의 크기와 닫히는 각속도 증가에 따라서 폐쇄력을 분석하였다. 실험 결과 방화문의 크기와 닫히는 각속도가 증가 할수록 폐쇄력이 증가하였으며, 일정 각속도 이상으로 증가할 경우 폐쇄력이 일정하게 유지되는 임계각속도가 존재하는 것을 확인하였다.