• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.450-452
• /
• 2001

In this paper, we proposed the automatic postal drop-off system based on the microprocessor board or PC. The weight of the small postal package is transmitted from the electronic scale and user-entered addresses and delivery rate are processed by the controller to calculate the fee. For 24 hour out-door operation and maintenance, non-cash payment methods such as credit card payment is used. The post stamp and receipt are printed by the thermal printer. For the electronic processing of the parcel, serial code is also printed on the stamp and receipts in bar code format. The parcel information obtained by the automatic postal drop-off system is transferred to remote central system by dial-up modem shared by the on site office. The proposed system and its control software are built for prototype model operation and the result met the design requirements. For real time processing, data reception through three serial ports is handled by interrupt routine. The proposed system is expected to be applied for commercial logistics system and pc automation system.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.132-133
• /
• 2005

A study to evaluate the fire extinguishing performance of the water mist system inside simulated machinery spaces according to IMO MSC/Circ.668 was performed. Fire tests were conducted inside a compartment having a area 100$m^2$(10m${\times}$10m) with a ceiling height of 10m and door opening of 2m${\times}$2m in size. Test fuels were used heptane, diesel, wood crib and mineral oil. Water mist nozzles were installed downward at ceiling and horizontally at bilge area. All fires in the test were extinguished within 15minutes of system activation and there was no reignition or fire spread.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.42-48
• /
• 1994

This paper presents the navigation method for a mobile robot which uses a single camera and fluorescent lamp as a guide mark, projected on a convex mirror. The current position and heading direction of the mobile robot are obtained from the image of the guide mark. While the mobile robot travels to a goal position, the current position and heading direction of the mobile robot are updated continuously and the desired path and actual moving path are displayed on the monitor screen in real time. This proposed method eliminates the need to rotate the camera to track the guide mark, since a panoramic view of the surrounding area is available from the convex mirror, and natural guide marks such as usual florescent lamp on the ceiling or door frame can be used for navigation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.704-707
• /
• 2003

The Purpose of carrier tracking and tracing is to achieve more information over shipments via carrying in mobile business .At multimodes, especially consignor wants to be aware of the exact situation and position of goods. As an innovate business model, we present CGPS(Carrier Global Positioning System) scheme usiug LEO(Low Earth Orbital) satellite. The LEO collects the data periodically and sends to the web server, and eventually customer's PC or PDA. This provides shipping company or freight forwarder with more robust information such as door status, container inside condition, etc.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.44-52
• /
• 1996

A procedure predicting warpage and post-deformation due to heat resistance test is presented. The procedure is applied to the injection molding processes of automotive plastic components, which are the door trim and the instrument pannel. The warpage of products is obtained from the residual stress after filling, packing and cooling process, and the post deformation due to the heat resistance test is calculated in the structural analysis of the product at the ejection temperature with the initial condition of residual stress, the boundary conditions and heat resistance conditions. The analyses give some useful guide lines in the design of automotive plastic parts which should satisfy heat resistance regulation.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.333-342
• /
• 2010

This paper describes a novel quantitative discomfort evaluation method based on motion data and its application to discomfort analysis of ingress/egress motions for cars. To develop the discomfort evaluation model, we introduced the discomfort regression curve and the range of motion for each degree-of-freedom of the joints of a whole human body. The maximum discomfort value for the joints at a specific time is selected to represent the discomfort value of the whole body at the time. The results of the experiments and questionnaires support the claim that our discomfort measure matches experimental subjective discomfort levels.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.265-266
• /
• 2012

Recently, preparing countermeasures about energy depletion and CO₂ emission progressing rapidly is considered as an urgent problem not only in domestic country but also in international countries. Among this, the requirement for the comfort development of in door environment is increasing according to housing culture and life environment changing. Thus, it is required urgently to save building energy and develop fusion technology maintaining comfort of indoor environment. Recently, energy-saving ways in saving heating and cooling energy by latent heat and thermal storage is considered significantly. In this study, keeping up with the times, thermal performance analyzed. Also, this study has the aim to draw materials for evaluating usefulness and efficiency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.364-369
• /
• 2012

The vehicle sound classified into driving sound due to power-train, operating sound due to electric motor like sunroof, door lock and electronic sound. These vehicle sound has various features depend on the characteristic of sound that user required. And it based on cultural and regional difference of user. In this study, the user required vehicle sound characteristics for luxury sedan was investigated in overall viewpoint. And virtual target sound was developed through the result of user preference investigation. Next, Jury test was carried out in Germany, USA and Korea for evaluating the target sound. And the regional and individual difference of preference was analyzed through the result of jury test. This result of research will be contributed to design of vehicle sound quality and target sound setting.

• International Journal of Automotive Technology
• /
• v.4 no.2
• /
• pp.57-64
• /
• 2003

The Intelligent Power Unit (IPU) utilized in Honda's Civic Hybrid Integrated Motor Assist (IMA) system was developed with the aim of making every component lighter, more compact and more efficient than those in the former model. To reduce energy loss, inverter efficiency was increased by fine patterning of the Insulated Gate Bipolar Transistor (IGBT) chips, 12V DC-DC converter efficiency was increased by utilizing soft-switching, and the internal resistance of the IMA battery was lowered by modifying the electrodes and the current collecting structure. These improvements reduced the amount of heat generated by the unit components and made it possible to combine the previously separated Power Control Unit (PCU) and battery cooling systems into a single system. Consolidation of these two cooling circuits into one has reduced the volume of the newly developed IPU by 42% compared to the former model.

• Journal of the Korean Home Economics Association
• /
• v.36 no.2
• /
• pp.35-46
• /
• 1998

The purpose of this study was to investigate the space feature of day care center in Taegu city. This study was conducted by means of the observation on the equipments, the actual measurement of space of day care center and environment, and the questionnaire survey by the chief of day care center. The samples for analysis were 20 day care center located in Taegu city. The Major findings were as follows; 1) The chief's satisfaction of the facilities of day care center was generally low. 2) The door design, the lighting conditions, and the toilet need to be improved. 3) According to observation on the equipment, it was suggested that the environment of day care center was not desireable.