Cho, Kwang Hwan;Jung, Jae Hong;Min, Chul Kee;Bae, Sun Hyun;Moon, Seong Kwon;Kim, Eun Seog;Cho, Sam Ju;Lee, Rena
Progress in Medical Physics
/
v.29
no.1
/
pp.42-46
/
2018
The purpose of this study was to perform a survey of the radiation shielding design goals (P) and workload (W) based on the radiation safety reports concerned with structural shielding design for the IMRT treatment technique in Tomotherapy vaults. The values of the P and W factors as well as of a verified concrete thickness of the ceiling, bottom, sidewalls (sidewall-1 and sidewall-2), and door have been obtained from radiation safety reports for a total of 16 out of 20 vaults. The recommended and most widely used report for P values was the NCRP No. 151 report, which stated that the P factor in controlled and uncontrolled areas was 0.1 and 0.02 mSv/week, respectively. The range of the W factor was 600~14,720 Gy/week. The absorbed dose delivered per patient was 2~3 Gy. The maximum number of patients treated per day was 10~70. The quality assurance (QA) dose was 100~1,000 Gy/week. Fifteen values of the IMRT factor (F) were mostly used but a maximum of 20 values was also used. The concrete thickness for primary structures including the ceiling, bottom, sidewalls, and door was sufficient for radiation shielding. The P and W factors affect the calculation of the structural shielding design, and several parameters, such as the absorbed dose, patients, QA dose, days and F factor can be varied according to the type of shielding structure. To ensure the safety of the radiation shielding, it is necessary to use the NCRP No. 151 report for the standard recommendation values.
Transactions of the Korean Society of Mechanical Engineers A
/
v.38
no.7
/
pp.771-777
/
2014
Injection-compression molding was used for film insert molding of an automotive door grip using films with three-dimensional embossed patterns. A vacuum mold was fabricated for vacuum-assisted thermoforming of the film, and an injection-compression mold was developed for film insert molding. Three pressure transducers were installed inside the mold cavity to measure cavity pressures. Injection-compression molding experiments under various compression strokes and toggle speeds were performed to investigate their effects on the cavity pressure and heights of the embossed patterns. The compression stroke of 0.9mm and low toggle speed resulted in a higher degree of conservation of embossed patterns. Additionally, the processing conditions for the maximum heights of embossed patterns were almost similar to those for minimum integral value of cavity pressures. The injection-compression molding process presents the opportunity to impart a soft-touch feeling of plastic parts printed with embossed patterns.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.20
no.3
/
pp.31-36
/
2020
The LTE-R system is a system consisting of a packet network that provides all IP-based services. Continuous failures related to the platform safety gate and subsequent safety accidents related to passengers and safety gate workers continue. The secondary damage caused by the failure of the platform safety door and the related human life damage have emerged as a major social issue.. By linking the beacon system to the Long Term Evoluton-Railway (LTE-R) network, an LTE-based railway wireless network currently in operation or being installed, it precisely locates trains and provides standardized fault alerts to train crews. When entering into the station, ultimately we will decelerate the train and reduce the accidents of metropolitabn railroad traffic by securing safe driving.
This study finds out the aged consumers' needs on the developing elderly friendly and sensitive bathtub. This bathtub focuses on enhancement of multi-senses and enhancement of health, safety & convenience during bath. The enhancing multi-senses would have four functions; therapy with color and aroma, the massage with micro water bubbles, the visual and auditory with TV & cinema, and the auditory with music and radio. Also, enhancing others of bathtub would have seven functions; emergency bell, blood-pressure check system for health condition, water temperature indicator, keeping water warm, reading a book in that, and controlling of house entrance door and a getting the phone during bath. The aged consumers' needs find throughout a questionnaire survey, and 497 data was analyzed. The main results are as follow. They consider a full bath behavior as a healthcare. They have an intention to purchase or use the elderly and friendly bathtub, and they prefer using it in common facilities to using it at home. They highly need health related function of bathtub, which are massage (64.4%), blood-pressure check system (55.1%) and aroma therapy (45.7%). The emergency bell (67.0%), keeping water warm (62.2%), and water temperature indicator (49.7%), related to safety & information function of bathtub, are needed. Also, they think tolerance for error and low physical effort in bathtub design alternative, opening door and inside sitting support, to be important.
Journal of the Institute of Electronics Engineers of Korea CI
/
v.39
no.3
/
pp.62-78
/
2002
In this paper, we describe a system that can interact with agents in the virtual space incorporated in the system. This system is constructed by an analysis system for analyzing human gesture and an interact system for interacting with agents in the virtual space using analyzed information. An implemented analysis system for analyzing gesture extracts a head and hands region after taking image sequence of an operator's continuous behavior using CCD cameras. In interact system, we construct the virtual space that exist an avatar which incarnating operator himself, an autonomous object (like a Puppy), and non-autonomous objects which are table, door, window and object. Recognized gesture is transmitted to the avatar in the virtual space, then transit to next state based on state transition diagram. State transition diagram is represented in a graph in which each state represented as node and connect with link. In the virtual space, the agent link an avatar can open and close a window and a door, grab or move an object like a ball, order a puppy to do and respond to the Puppy's behavior as does the puppy.
Kim, Seong-Jin;Kang, Seok-Hoon;Park, Ki-Hong;Yoo, Won-Sul;Park, Sang-Hu;Choi, Ho-Jin
Journal of the Korean Society for Precision Engineering
/
v.28
no.6
/
pp.724-731
/
2011
Dew generation on an outer surface is considered as an important issue to be settled in the field of home appliances. In the case of a refrigerator that is subject to the dew generation problem on the surface of an outer-door of refrigeration thread, and so as to solve this problem, the electric heater is generally used for drying the dew. However, the heater inevitably requires electrical power consumption that is one of critical issues on the refrigerator. In this study, to prevent dew generation without the heater, a method of using induced heat from room temperature was proposed. In edge sides of a door, high conductive plates are installed and received the heat from outside that is relatively high temperature, and the heat is transferred onto dew generation region. Using prototypes, performance test was conducted under a certain temperature and humidity condition. The experimental results show that the surface temperature on the dew generation region was increased about $0.3{\sim}2.5^{\circ}C$ without use of any heater.
The prensent study was aimed to explore the reality of the low-income consumers problem by the comparison among five income classes. Specifically, this study was intended to (1) compare the levels of consumer skill, market risk, and consumer problem among the five income classes, (2) examine the relationship between consumer problem and consumer skill, and the relationship between consumer problem and market risk, and (3) search the types of consumer problems that each income class consumers might experience the most often. For this purpose, a survey was conducted using questionaire on 525 home managers in Seoul. The deta were analyzed by ANOVA and DMR test. The major findings were as follows; First, the consumer skill was the poorest in the low-income consumers. There was curvilinear relationship between consumer skill and income level. Second, the market risk was the highest in the low-income consumers. Market risk had a negative linear relationship with income level. Third, consumer problem was the most serious in the low-income consumers and was the least serious in the middle-income consumers. Fourth, the lower consumer skill and the higher market risk the consumers had, the more consumer problems they tended to experience. Finally, the low-income consumers had relatively more difficulties in door-to-door sale and inferior goods problem than the middle and the high-income consumers. On the other hand, the latter experienced relatively more difficulties in false and misleading advertising, overcharge, unfair bargain, and warrenty-repair-exchange problem than the former. Taken together, the research hypotheses were well supported in this study. It was suggested that the quality and the quantity of the low-income consumers problem were different from those of the middle-and the high-income consumers problem.
In this study, the basic data were collected for improving the amenity of indoor environment of a super yacht and the performance of indoor environment was analyzed by utilizing measured data during summer period. Through the results of examination, the following conclusions are drawn. 1) It is estimated that, in case of closing the door of Saloon connected with outside, there is little inflow of exhaust gas, but when the door is open, the indoor-air might be polluted so fast. Therefore, it is necessary to make a counter plan about the method of ventilation and amount of ventilation to keep the indoor aerial environment agreeable. 2) It is urgent to conceive countermeasure against engine noise because the noise level of all rooms exceeds 60dB, which is regulation of noise for protecting crew established in ship's classification, during the sailing. 3) State cabin and Guest cabin are super cooled by operating air conditioner exceeding agreeableness extent and it is needed to prevent them.
Journal of the Korean association of regional geographers
/
v.7
no.3
/
pp.29-43
/
2001
This paper examined characteristics of folk houses related to climate in Cheju island using climate data, documents and field survey data. Precipitation and humidity affect characteristics of folk houses in the southern parts of the island during summer while in winter, northern parts are mainly affected by wind. Chuck-gub has been shown through all over Cheju island due to the characteristics of precipitation. Jaechangmoon exists in southern parts of the island and these parts are experienced high humidity in summer The double-row room houses, the low eaves, gentle slop roof and stone wall are distributed through Cheju island and is related to wind. The double door is common in the northern parts because of strong winter monsoon, and Yimoonkan exists in the coastal area of the northern parts. Outer wall, Pung-Che and Gorangche are affected by winter monsoon and abundant precipitation. Gorangche has shown through both the northern parts and southeastern parts. Folk houses in the southern parts are more open than in northern parts. Folk houses in the northern parts are divided into the coastal type and the piedmont type. In the southern parts, they are subdivided the eastern type and the western type by the appearance of Gorangche.
This paper aims to analyze the causal relationship between exports and regional economic growth based on the provincial data over the period from 1952 to 2004. To reflect the regional and chronical characteristics, this paper divides China into three regions; Eastern, Central and Western regions, and also the whole period into two sub-periods; before and after 1979 when the Open-door policy(ODP) was initiated and applies Granger causality analysis. The Granger causality tests showed that exports Granger cause economic growth in the Eastern region, but not in the Central and Western regions, as a whole. When the period is divided, in the Eastern region, causal relation between the two variables was not found before the Open-door policy. For the second period, however it turns out that exports cause the region's economic growth. This result is consent with the fact that the region has been a main beneficiary of the policy. For the Central region, the tests showed no causality in the pre-ODP period, but significant bidirectional causality in the post-ODP period. Meanwhile, in the Western region, exports turned out causing economic growth significantly before the ODP, while economic growth appeared to causing trade after the ODP.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.