• 한국화재소방학회논문지
• /
• 제27권2호
• /
• pp.6-10
• /
• 2013

본 연구는 풍도, 부속실, 거실 그리고 계단실로 구성된 구조물의 제연설비 성능에 관한 연구를 수행하고 급기 가압실의 안전성을 구현하기 위한 실험 자료를 구축하고자 하는데 목적이 있다. 이를 위해서 부속실 가압 및 차압 조절 설비와 방화문의 개폐력 측정 장치를 제작하였다. 본 주제는 부속실의 가압을 위한 설계유량과 폐쇄시 차압이 동일한 경우 방화문의 크기와 닫히는 각속도 증가에 따라서 폐쇄력을 분석하였다. 실험 결과 방화문의 크기와 닫히는 각속도가 증가 할수록 폐쇄력이 증가하였으며, 일정 각속도 이상으로 증가할 경우 폐쇄력이 일정하게 유지되는 임계각속도가 존재하는 것을 확인하였다.

• Journal of Korean Neurosurgical Society
• /
• 제59권6호
• /
• pp.604-609
• /
• 2016

Objective : The aim of this study was to compare the clinical and radiological outcomes associated with the use of hydroxyapatite (HA) spacer and allogeneic bone (AB) spacer in laminoplasty. Methods : From January 2006 to July 2014, 79 patients with cervical spondylotic myelopathy or ossification of the posterior longitudinal ligament underwent cervical laminoplasty. The radiologic parameters were obtained from plain radiography and three-dimensional computed tomography. All images were taken before and after surgery. Cervical lordosis, spinal canal dimension, fusion between lamina and spacer, and resorption of spacer were checked. Clinical outcomes were assessed using visual analog scale and Japanese Orthopedic Association. Results : Double-door laminoplasty was performed on 280 levels : 182 in the HA group and 98 in the AB group. The mean follow-up was 23.1 months (range : 4-69 months). Similar fusion rates were found in these groups (p=0.3). The resorption rate between lamina and spacer was lower in the HA group (p<0.001). During the immediate postoperative period, the canal dimension of both groups increased compared with the results in the preoperative period. However, the canal dimension of the AB group decreased over time compared with that of the HA group (p<0.001). Conclusion : Double-door laminoplasty improved the clinical outcomes of both groups. However, the spinal canal dimension in the AB group showed a greater degree of reduction than in the HA group at the final postoperative follow-up. Therefore, we suggest that surgeons consider the use of larger-sized AB spacers in double-door laminoplasties.

• 한국전자통신학회논문지
• /
• 제14권4호
• /
• pp.663-670
• /
• 2019

지하철에서 스크린 도어와 플랫폼간의 경계선을 검출할 수 있는 변형된 케니에지 검출 알고리듬을 제안한다. 일반적으로 지하철에서는 플랫폼과 스크린 도어 사이의 경계선은 주변에 비해 어둡게 나타나므로 이의 특성을 고려하여 변형된 bottom-hat 변환을 이용해 에지 영상을 만든다. 이렇게 구한 에지 영상에 이중 문턱화를 통해 강한 에지와 약한 에지를 포함하는 이중 문턱화 영상을 얻는다. 이중 문턱화 영상에 호프 변환을 적용하여 플랫폼과 스크린 도어 간의 경계선을 검출하여 그 길이를 계산하고, 사람 등 물체가 있을 때와 없을 때와의 경계선 길이를 비교함으로써, 경계선을 침범 여부를 판단하는 알고리듬을 제안한다. 본 논문에서는 카메라 높이 위치에 따라 두 종류의 서로 다른 입력영상을 사용하여 제안한 변형된 케니에지 검출 알고리듬에 대한 결과를 컴퓨터 시뮬레이션으로 나타내었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.322-325
• /
• 2007

Dent resistance is an important characteristic to avoid damage on automotive outer panels. From a practical point of view, dents can be caused in a number of ways. Considering doors as an example, denting can occur from stone impacts or from the careless opening of an adjacently parked vehicle door. Denting can occur where the door surface is smooth and may not have sufficient curvature to resist dent. These exterior body parts are designed to improve dent resistance using a combination of work hardening and bake hardening. In brief, dent is affected by the shape of the parts and the material properties such as yield strength, strain and thickness. In this work, forming of door outer panel is investigated by Taguchi method. Main parameters are yield strength, thickness, blank size, blank holding force and so on. For the given value of design parameters, forming analysis of the thirty six cases are carried out according to L18 orthogonal array. After comparing the performance by simple conversion of simulation results into dent resistance, the final suggestion of the forming parameters is verified for the best improvement of dent resistance.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.164-173
• /
• 2015

There exists required safety integrity level (SIL) to assure safety in accordance with international standards for every electrical / electronics / control equipment or systems with safety related functions. The SIL is allocated from lowest level (level 0) to highest level (level 4). In order to guarantee certain safety level that is internationally acceptable, application of methodology for SIL allocation and demonstration based on related international standards is required. However, application standard differs from every industry in domestic or international for application on mythology for allocation and demonstration of SIL. Application or assessment is not easy since absence on clear criteria or common definition. This research studied not only fundamental concept of SIL required to guarantee safety in accordance with international standards for safety related equipment and system, but different types of methodologies for SIL allocation. Specifically, SIL allocation for Platform Screen Door system of railway is studied applying methodology of severity of accidents and risk graph among different methodologies for SIL allocation.

• 대한안전경영과학회지
• /
• 제15권2호
• /
• pp.63-69
• /
• 2013

The purposes of this study are to survey stereotypes of control-display relationships for seven principal controls in passenger cars using the paper-pencil and hardware tests, and to examine stereotype strength of the paper-pencil test through comparing the stereotypes for the controls derived by the two methods. Ninety two and 60 college-aged students participated in the paper-pencil test and the real car simulation of the hardware test, respectively. There are dominant motion-directions for all controls in the paper-pencil test, while in the hardware test, there are dominant motion-directions for six controls including head light, high beam, door window, ignition key, door key and door lock controls. The stereotypes of motion-directions for six controls obtained by the paper-pencil test were the same as or similar to those by the hardware test. It was inferred from this that the congruence of the stereotypes by the two methods might be attributed to two simple motion-direction principles of 'clockwise for increase' and 'upward for increase.' Although it is known that the hardware test would be best for obtaining accurate stereotypes between controls and displays, this study implies that if the paper-pencil test is well designed, the paper-pencil test can produce the same results as the hardware test at low cost and without consuming time.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권3호
• /
• pp.215-222
• /
• 2015

사물인터넷을 이용한 디지털 도어락, DDiT를 소개한다. DDiT에서는 기존의 디지털 도어락을 제어하기 위하여 통합 마이크로 컨트롤러 플랫폼인 아두이노를 이용하였으며 모바일 플랫폼으로는 안드로이드 스마트폰을 사용하였다. DDiT의 장점 중 하나는 기존의 디지털 도어락에 부착해서 사용할 수 있는 형태로 스마트폰 애플리케이션을 열쇠로 활용하는 방식이라는 점이다. 더구나, 스마트폰 애플리케이션을 사용하므로 이를 통해서 여러 가지 부가적인 기능도 수행할 수 있다. 따라서, 사물인터넷을 이용한 디지털 도어락은 일반 가정집 도어락은 물론 호텔, 연구실, 및 회사와 같은 높은 보안을 필요로 하는 장소에까지 다양한 분야에서 효과적이고 편리하게 활용될 수 있을 것이다.

• 건축역사연구
• /
• 제1권1호
• /
• pp.33-43
• /
• 1992

The purpose of this study is to investigate the transformation of openings installed on the partition wall between Daechung and Bang, through the case study on MyungRyunDangs of 19 HangGyos in Kyungbuk province. The way to carry out this study was to look through existing situations and to find out transformed traces of the openings in terms of their locations on several floor types. The transformation of the openings was analyzed chronologically into two cases of 'before 18C' and 'after 18C'. i) Before 18C ; the early type had double swing window on the front column spacing and single swing door on the rear, and the later type had swing door on the front column spacing and on openings on the rear. ii) After 18C; the earlist type was the same as the later type of 'before 18C', the next type had swing doors on both the front and the rear column spacing, and the last type had Sabunhap-swing door on the column spacing, iii) Through those transformations, the windows gradually replaced by the doors in the openings.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.66-73
• /
• 2021

In this paper, we analyzed and considered the precision of parts produced by 3D printing methods. For the latch systems applied to the Wingline folding doors, the 3D shape of the door hinge part was printed using FDM and DLP methods. Then, the 3D printed shape was scanned to measure the dimensions and dimensional changes of the actual model. In the comparison and analysis of the 3D printed door hinge parts, because the output filling density is 100% owing to the characteristics of DLP 3D printing, the filling density in FDM 3D printing was also set to 100%.

• 한국화재소방학회논문지
• /
• 제15권4호
• /
• pp.49-56
• /
• 2001

화재시 특별피난계단의 부속실의 연기침입을 방지하기 위해 적용하고 있는 급기가압방연시스템의 효능에 대한 논란이 증가하고 있는 바, 국내 고층 건축물의 특별피난계단에 설치운용중인 급기가압시스템의 설계시 핵심요소인 가압공간의 누설틈새, 계단실과 부속실 또는 부속실과 거실공간사이의 출입문을 통한 방연풍속과 출입문의 자동폐쇄를 보장하는 도어 개폐장치등에 대한 문제점을 조사연구하여 실질적인 효과를 보장할 수 있는 기준을 설정하고, 안전성확보를 보장하면서 경제성을 고려한 설계안을 세부적인 사례를 들어 구체적으로 제시하였다.