• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.2-2
• /
• 2019

네팔의 경우 상하수도를 비롯한 기본적인 위생시설이 크게 미비하며 수도인 카트만두조차 수십 년 된 노후관로가 상수관으로 이용되고 있다. 또한, 하수처리 시설이 사실상 전무하며, 지하수를 주요 수원으로 활용하는 대다수 지역은 식수의 오염에 따른 수인성 전염병에 취약한 실정이다. 따라서 네팔에서는 깨끗한 물과 안정적인 수도공급, 하수처리 시설의 확보가 무엇보다 중요한 과제이며, 이에 스마트워터그리드 기술의 도입을 통한 수질개선, 안정적인 수도공급방안이 요구되고 있다. 본 연구에서는 국내에서 개발된 스마트워터그리드 기술을 네팔 소도시에 적용하기 위한 방법론을 제안하였다. 네팔 소도시의 수자원 및 상수도 시설을 답사하여 문제점을 파악하고, 시설 및 운영현황을 분석하였다. 현장조사 자료를 기반으로 스마트워터그리드 기술의 적용 방향과 단기 및 중장기 계획을 제시하였다. 또한, 네팔 소도시 중 하나인 Beni시를 시범지역으로 하여 과거 30년 동안 월 강수량 기반의 가뭄지수를 분석하고, EPANET을 통하여 상수관망해석을 실시였다. 연구 결과, 가뭄의 발생횟수가 점차 빈번해지는 것으로 나타났으며, 상수관망 해석 시 대부분의 수요절점 내 수압이 설계기준보다 낮은 것으로 모의되었고, 향후 관 노후화를 고려한 절점 수압의 확보와 수질개선 방안이 제시될 필요가 있는 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.373-373
• /
• 2018

화력발전소, 석유화학공단 등 대규모 배출원에서 발생되는 이산화탄소를 활용하여 온실가스의 배출을 줄이고, 경제적 가치를 창출할 수 있는 탄소자원화는 기후변화 대응을 위한 국가전략프로젝트 중 하나이다. 전 세계적으로 탄소자원화 기술은 아직 상용화 단계이지만 최근 강화된 온실가스 감축 의무로 인하여 탄소자원화 시장은 더욱 확대될 전망이다. 화력발전소의 이산화탄소 발생 과정에서 배출되는 수증기는 응축기술을 통하여 새로운 수원으로 활용이 가능하다. 응축된 물의 최적 활용과 사용처 지향적 효율적 물순환을 위한 시설 내 스마트 워터 그리드(SWG) 개념의 물분배 시스템은 발전 산업 내에 탄소자원화의 핵심기술로 사용될 수 있다. SWG는 시설 내 용수공급 관리에서의 관망 운영, 물 수요 관리 등 ICT를 활용한 종합적인 물 분배 시스템으로, 본 연구에서는 SWG 물순환 시스템의 국내외 기술조사를 통해 발전 산업 시설 내에 적용성을 검토하였다. 물의 재이용 시스템을 포함한 SWG 기술, 지능형 관망 운영 기법 기술, 실시간 수질 감시 체계 기술 연구를 기반으로, ICT 기반 용수공급 정보 관리 기술과 수운영 모니터링 기술을 통하여 SWG가 발전 산업 연계 기술로써 적용될 수 있도록 하였다. 본 연구에서 제시된 SWG 시스템을 적용한 산업 인프라를 통하여 산업적 파급 효과를 높이고, 이를 활용한 인력과 비용 절감이 기대되며, 저에너지, 고효율화를 위한 기술력과 글로벌 물 시장진출 경쟁력을 향상시키기 위한 기초연구자료로써 활용이 가능할 것으로 기대된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.1
• /
• pp.162-174
• /
• 2014

Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is because the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate) that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manually by experienced workers. In this study, a method of representing the block assignment rules using a diagram was suggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.505-508
• /
• 2015

Soil bulk density is a key parameter for soil physical property. Much root placed in rhizosphere soil lump, especially in grassland and orchard, makes it difficult to measure soil bulk density. This experiment was carried out to countermeasure the above drawbacks. Volume check apparatus using water-filling method was made of acryl for higher accuracy in bulk density measurement. 10 types of land cover, including bare, tall fescue, rye, and soybean, were used for determining the relationships between root and bulk density. In this study, higher root volume resulted in higher differences in bulk density between in-situ core soil and root-ridded core soil, which indicated the volume check apparatus through water-filling could be useful for increasing the accuracy of bulk density of soils with much root.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.62-70
• /
• 2021

Representative systematic accident analysis methods proposed so far include AcciMap, STAMP, and FRAM. This study used these three techniques to analyze a fire accident case that occurred during routine manufacturing work in a domestic chemical plant and compared the results. The methods used different approaches to identify the cause of the accident, but they all highlighted similar causal factors. In addition to technical issues, the three accident analysis methods identified factors related to safety education, risk assessment, and the operation of the process safety management system, as well as management philosophy and company culture as problems. The AcciMap and STAMP models play complementary roles because they use hierarchical structures, while FRAM is more effective in analyses centered on human and organizational functions than in technical analyses.

• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.595-606
• /
• 2022

Industrial pig breeding has used the Duroc breed and terminal sires in a three-way crossbred system in Korea. This study identified the gene variation patterns related to carcass quality in crossbred pigs ([Landrace × Yorkshire] × Duroc) using whole-exome sequencing (WES). This study used crossbred pigs and divided them into two groups (first plus grade, n = 5; second grade, n = 5). Genomic DNA samples extracted from the loin muscles of both groups were submitted for WES. A set of validated single-nucleotide polymorphisms (SNPs: n = 102) were also subjected to the Kompetitive allele-specific polymerase chain reaction (KASP) to confirm the WES results in the loin muscles. Based on the WES, SNPs associated with meat quality were found on chromosomes 5, 10, and 15. We identified variations in three of the candidate genes, including kinesin family member 5B (KIF5B), GLI family zinc finger 2 (GLI2), and KIF26B, that were associated with meat color, marbling score, and backfat thickness. These genes were associated with meat quality and the mitogen-activated protein kinase (MAPK) and Hedgehog (Hh) signaling pathways in the crossbred pigs. These results may help clarify the mechanisms underlying high-quality meat in pigs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.399-406
• /
• 2010

In this paper, the optimization of frictional bearings that applied to improve the seismic performance of conventional bridges were conducted. The nonlinear dynamic analysis of steel bridges and concrete bridges are carried out with the El Centro and artificial earthquake motions, and the reponses of the bridges were optimized by genetic algorithm. The object functions were considered with two parameters, such as shear forces and displacements at bearing, and the optimum object functions were searched by varying the weighting factors of the two parameters. As results, in case of the steel bridges, the optimum results were obtained when larger weight factor was imposed to the shear force. However, in case of concrete bridges, larger weight factor was need to the displacement for optimum results.

• Journal of Sensor Science and Technology
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2005

For more convenient electrode-electrolyte interface impedance analysis in biosensor, a stand-alone impedance measurement system is required. In our study, we developed a PC-based portable system to analyze impedance of the electrochemical cell using microprocessor. The devised system consists of signal generator, programmable amplifiers, A/D converter, low pass filter, potentiostat, I/V converter, microprocessor, and PC interface. As a microprocessor, PIC16F877 which has the processing speed of 5 MIPS was used. For data acquisition, the sampling rate at 40 k samples/sec, resolution of 12 bit is used. RS-232 with 115.2 kbps speed is used for the PC communication. The square wave was used as stimuli signal for impedance analysis and voltage-controlled current measurement method of three-electrode-method were adopted. Acquired voltage and current data are calculated to multifrequency impedance signal after Fourier transform. To evaluate the implemented system, we set up the dummy cell as equivalent circuit of which was composed of resistor, parallel circuit of capacitor and resistor connected in parallel and measured the impedance of the dummy cell; the result showed that there exist accuracy within 5 % errors and reproduction within 1 % errors compared to output of Hioki LCR tester and HP impedance analyzer as a standard product. These results imply that it is possible to analyze electrode-electrolyte interface impedance quantitatively in biosensor and to implement the more portable high speed impedance analysis system compared to existing systems.

• Journal of Acupuncture Research
• /
• v.22 no.1
• /
• pp.61-75
• /
• 2005

Objective : The purpose of this study is to arrange the literature about a acupuncture therapy on the knee rheumatoid arthritis. Methods : We arrange fifty kinds of literature about a acupuncture therapy of knee joint, knee arthritis, Results : Acupucture point at G30, G34, S36, LI11, B4O, G39, G38, LI4 used freaquently for the acupuncture therapy Conclusion : B, G, S, Sp of merdians used frequently for the acupuncture therapy.

• Journal of Haehwa Medicine
• /
• v.9 no.1
• /
• pp.595-646
• /
• 2000

I. Introduction Bi(痺) means blocking. BiJeung is one kind of symptoms making muscles, bones and jonts feel pain, numbness or edema. For example it can be gout or SLE etc. says that Bi is combination of PungHanSeup. And many doctors said that BiJeung is caused by food, fatigue, sex, stress and change of weather. Therefore we must treat BiJeung by character of patients and characteristic of the disease. Many famous doctors studied medical science by their fathers or teachers. So the history of medical science is long. So I studied ${\ll}Bijeungjujip{\gg}$. II. Final Decision 1. JoGeumTak(趙金鐸) devided BiJeung into Pung, Han, Seup and EumHeo, HeulHeo, YangHeo, GanSinHeo by charcter or reaction of pain. And he use DaeJinGyoTang, GyegiGakYakJiMoTang, SamyoSan, etc. 2. JangPaeGyeu(張沛圭) focused on division of HanYeol(寒熱; coldness and heat) in spite of complexity of BiJeung. He also used insects for treatment. They are very useful for treatment of BiJeung because they can remove EoHyeol(瘀血). 3. SeolMaeng(薛盟) said that the actual cause of BiJeung is Seup. So he thought that BiJeung can be divided into PungSeup, SeupYeol, HanSeup. And he established 6 rules to treat BiJeung and he studied herbs. 4. JangGi(張琪) introduced 10 prescriptions and 10 rules to cure BiJeung. The 1st prescription is for OyeSa, 2nd for internal Yeol, 3rd for old BiJeung, 4th for Soothing muscles, 5th for HanSeup, 6th for regular BiJeung, 7th for functional disorder, 8th for YeolBi, 9th for joint pain and 10th for pain of lower limb. 5. GangSeYoung(江世英) used PungYeongTang(風靈湯) for the treatment of PungBi, OGyeHeukHoTang(烏桂黑虎湯) for HanBi, BangGiMokGwaTang(防己木瓜湯) for SeupBi, YeolBiTang(熱痺湯) for YeolBi, WoDaeRyeokTang(牛大力湯) for GiHei, HyeolPungGeunTang(血楓根湯) for HyeolHeo, ToJiRyongTang(土地龍湯) for the acute stage of SeupBi, OJoRyongTang(五爪龍湯) for the chronic stage of SeupBi, and so on. 6. ShiGeumMook(施今墨) devided BiJeung into four types. They are PungSeupYeol, PungHanSeup, GiHyeolSil(氣血實) and GiHyeolHeo(氣血虛). And he introduced the eight rules of the treatment(SanPun(散風), ChukHan(逐寒), GeoSeuP(, CheongYeol(淸熱), TongRak(通絡), HwalHyeol(活血), HaengGi(行氣), BoHeo(補虛)). 7. WangYiYou(王李儒) explained the acute athritis and said that it can be applicable to HaneBi(行痺). And he used GyeJiJakYakJiMoTang(桂枝芍蘂知母湯) for HanBi and YeolBiJinTongTang(熱痺鎭痛湯) for YeolBi. 8. JangJinYeo(章眞如) said that YeolBi is more common than HanBi. The sympthoms of YeolBi are severe pain, fever, dried tongue, insomnia, etc. And he devided YeolBi into SilYeol and HeoYeol. In case of SilYeol, he used GyeoJiTangHapBaekHoTang(桂枝湯合白虎湯) and in case of HeoYeol he used JaEumYangAekTang(滋陰養液湯). 9. SaHaeJu(謝海洲) introduced three important rules of treatment and four appropriate rules of treatment of BiJeung. 10. YouDoJu(劉渡舟) said that YeolBi is more common than HanBi. He used GaGamMokBanGiTang(加減木防已湯) for YeolBi, GyeJiJakYakJiMoTang or GyeJiBuJaTang(桂枝附子湯) for HanBi and WooHwangHwan(牛黃丸) for the joint pain. 11. GangYiSon(江爾遜) focused on the internal cause. The most important internal cause is JeongGiHeo(正氣虛). So he tried to treat BiJeung by means of balance of Gi and Hyeol. So he ususlly used ODuTang(烏頭湯) and SamHwangTang(三黃湯) for YeolBi, OJeokSan(五積散) for HanBi, SamBiTang(三痺湯) for the chronic BiJeung. 12. HoGeonHwa(胡建華) said that to distinguish YeolBi from Hanbi is very difficult. So he used GyeJiJakYakJiMoTang in case of mixture of HanBi and YeoBi. 13. PiBokGo(畢福高) said that the most common BiJeung is HanBi. He usually used acupuncture with medicine. He followed the theory of EumYongHwa(嚴用和)-he focused on SeonBoHuSa(先補後瀉). 14. ChoiMunBin(崔文彬) used GeoPungHwalHyeolTang(祛風活血湯) for HanBi, SanHanTongRakTang(散寒通絡湯) for TongBi(痛痺), LiSeupHwaRakTang(利濕和絡湯) for ChakBi(着痺), CheongYeolTongGyeolChukBiTang(淸熱通經逐痺湯) for YeolBi(熱痺) and GeoPungHwalHyeolTang(祛風活血湯) for PiBi(皮痺). 15. YouleokSeon(劉赤選) introduced the common principle for the treatment of BiJeung. He used HaePuneDeungTang(海風藤湯) for HaengBi(行痺), SinChakTang(腎着湯), DokHwalGiSaengTang(獨活寄生湯) for TongBi(痛痺), TongPungBang(痛風方) for ChakBi(着痺) and SangGiYiMiTangGaYeongYangGakTang(桑枝苡米湯加羚羊角骨) for YeolBi(熱痺). 16. LimHakHwa(林鶴和) said about TanTan(movement disorders or numbness) and devided TanTan into the acute stage and the chronic stage. He used acupuncture at the meridian spot like YeolGyeol(列缺), HapGok(合谷), etc. And he also used MaHwangBuJaSeSinTang(麻黃附子細辛湯) in case of the acute stage. In the chronic stage he used BangPungTang(防風湯). 17. JinBaekGeun(陳伯勤) liked to use three rules(HwaHyeol(活血), ChiDam(治痰), BoSin(補腎)) to treat BiJeung. He used JinTongSan(鎭痛散) for the purpose of HwalHyeol(活血), SoHwalRakDan(小活絡丹) for ChiDam(治痰) and DokHwalGiSaengTang(獨活寄生湯) for BoSin(補腎). 18. YimGyeHak(任繼學) focused on YangHyeolJoGi(養血調氣) if the stage of BiJeung is chronic. And in the chronic stage he insisted on not using GalHwal(羌活), DokHwal(獨活) and BangPung(防風).