• Safety and Health at Work
• /
• v.7 no.1
• /
• pp.63-71
• /
• 2016

Background: Construction painters have not been studied well in terms of their hazards exposure. The objective of this study was to evaluate the exposure levels of total volatile organic compounds (TVOCs) for painters in the construction industry. Methods: Activity-specific personal air samplings were carried out in three waterproofing activities [polyurethane (PU), asphalt, and cement mortar] and three painting activities (epoxy, oil based, and water based) by using organic-vapor-monitor passive-sampling devices. Gas chromatograph with flame ionization detector could be used for identifying and quantifying individual organic chemicals. The levels of TVOCs, by summing up 15 targeted substances, were expressed in exposure-index (EI) values. Results: As arithmetic means in the order of concentration levels, the EIs of TVOCs in waterproofing works were 10.77, 2.42, 1.78, 1.68, 0.47, 0.07, and none detected (ND) for indoor PU-primer task, outdoor PU-primer task, outdoor PU-resin task, indoor PU-resin task, asphalt-primer task, asphalt-adhesive task, and cement-mortar task, respectively. The highest EI for painting works was 5.61 for indoor epoxyprimer task, followed by indoor epoxy-resin task (2.03), outdoor oil-based-spray-paint task (1.65), outdoor water-based-paint task (0.66), and indoor oil-based-paint task (0.15). Assuming that the operations were carried out continuously for 8 hours without breaks and by using the arithmetic means of EIs for each of the 12 tasks in this study, 58.3% (7 out of 12) exceeded the exposure limit of 100% (EI > 1.0), while 8.3% (1 out of 12) was in 50e100% of exposure limit (0.5 > EI > 1.0), and 4 tasks out of 12 were located in less than 50% of the limit range (EI < 0.5). Conclusion: From this study, we recognized that construction painters are exposed to various solvents, including carcinogens and reproductive toxins, and the levels of TVOC concentration in many of the painting tasks exceeded the exposure limits. Construction workers need to be protected from chemical agents during their painting works by using personal protective devices and/or work practice measures. Additional studies should focus on the exposure assessment of other hazards for construction workers, in order to identify high-risk tasks and to improve hazardous work environments.

• Safety and Health at Work
• /
• v.9 no.3
• /
• pp.356-359
• /
• 2018

This case report attempts to present a case of acute toxic hepatitis in fire extinguisher manufacturing workers exposed to 2,2-dichloro-1,1,1-trifluoro-ethane (HCFC-123) in August 2017 in Korea. Twenty-two-year-old male workers were exposed to HCFC-123 for 1.5 hours one day and for 2.5 hours the other day, after which one worker died, and the other recovered after treatment. The workers were diagnosed with acute toxicity of hepatitis. However, exposure levels of HCFC-123 were not known with no work environment measurement done. Therefore, this study was conducted to estimate the exposure concentration of HCFC-123 via a job simulation experiment. In the simulation, the HCFC-123 exposure concentration was measured with the same working practice and working time as with the workers aforementioned. As a result, the workers who infused HCFC-123 into storage tanks were estimated to be exposed to HCFC-123 at a concentration of $20.65{\pm}10.81ppm$, and a mean concentration of area samples within a working radius were estimated as $70.30{\pm}18.10ppm$. Valve assembly workers working on valves of a fire extinguisher filled with HCFC-123 were exposed to HCFC-123 at concentrations of $91.65{\pm}4.03ppm$ and $115.55{\pm}7.28ppm$, respectively, in the simulation, and area samples simulated within the working radius were also found to be high with concentrations of $122.75{\pm}91.15ppm$ and $126.80{\pm}60.25ppm$, respectively. Nitrogen gas packing workers, who did not handle HCFC-123 directly, were exposed to the agent at a concentration of $71.80{\pm}8.49ppm$. These results suggest that exposure to HCFC-123 at high concentrations for 1.5-2.5 hours caused acute toxic hepatitis in two workers.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.577-582
• /
• 1999

In order to make the electroconductive $Si_3N_4$-TiN composities, the Si-Ti(N) compacts were nitrided at $1450^{\circ}C$ for 20hours, and then they were post-sintered by a gas-pressure-sintering technique at 1TEX>$1950^{\circ}C$ for 3.5 hours. As starting powders, commercial si powder of about $10\mu\textrm{m}$, two types of Ti powders of 100 and 325 mesh, and fine-sized TiN of $2.5\mu\textrm{m}$ powders were used. In the $Si_3N_4$-TiN sintered bodies used Ti powders, the relative density and fracture strength and electrical conductivity are low due to the existence of large amounts of coarse pores. However, in the $Si_3N_4$-TiN composite used TiN powder, the fracture toughness, fracture strength and electrical resistivity were $5.0MPa{\cdot}m^{1/2}$, 624MPa and $1400{\omega}cm$, respectively. The dispersion of TiN particles in the composite inhibited the growth of $Si_3N_4$ in the shape of rod and made strong strain field contrasts at the $Si_3N_4$-TiNinterfaces. It was recognized that microstructural control is required to improve the electrical conductivity and mechanical properties of $Si_3N_4$-TiN composites by dispersing TiN particles homogeneously.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.108-116
• /
• 2018

Objectives: This study investigated to the analytical work environment, analyst's expert and status of analytical instrument in the designated organization's laboratory for measuring work environment, and carried out to ensure reliability of analytical results. Methods: This study was conducted by 114 analysts who work in designated organization's laboratory for measuring work environment. Information on the working environment and personal characteristics of the analysts were collected using a self-reported questionnaire and were analyzed using the SPSS program through analysis of frequency and t-test. Results: The speciality of subjects was occupational health(57.0%), environmental health(38.6%) and environmental engineering(4.4%), and they had a higher level of academic ability than workers in other industries. Analysts had to handle a large number of sample analysis and many tasks other than analytical work. The analysts answered that it was difficult to analyze organic substances than inorganic substances, and the difficult parts were the analytical methods setting of new substances(55.3%), instrument analysis(24.6%) and principle of analysis(23.7%). Analytical instruments mainly have legally required instruments. The difficulty of the analysis is solved from the senior analyst in the laboratory and analytical information is mainly exchanged through seminar organized by the Association of Occupational Health Analysts. The analysts who are planning to move or considering the company were 48.2%, and the reasons for moving the company were difficult to work(14.0%), low salary(9.6%), employment type(8.8%) and job stress(7.0%). Conclusions: The conclusions of our study were that it was possible to secure reliability by solving the problems such as implementing professional education to improve expertise of analysts, strengthening analytical instruments through institutional improvement and improving work environment.

• The Journal of Internal Korean Medicine
• /
• v.41 no.3
• /
• pp.467-477
• /
• 2020

Objectives: This study investigated the cutaneous electrogastrogram (EGG) and other clinical characteristics of dyspeptic patients who have been diagnosed with Stomach Qi Deficiency (SQD) using the Scale for Stomach Qi Deficiency (SSQD). Methods: This study reviewed the clinical records of 38 patients with dyspepsia who were evaluated with SSQD and EGG at the Department of Digestive Diseases of Kyung Hee University Korean Medicine Hospital in Seoul, Korea from November 1, 2019 to February 29, 2020. We evaluated the EGG and other clinical characteristics of the SQD patients to determine if there was an association between the SSQD scores and the EGG. Results: In terms of the EGG, the SQD patients showed no significant increase in the percentage of normal slow wave after a meal and a slightly decreased power ratio at Channel 1 and Channel 2. We also found an association between the SSQD scores and the EGG parameters at Channel 1 and Channel 3. The average Ryodoraku score of the patients was 33.00±14.90 (μA). In the Heart Rate Variability (HRV) test, the average Total Power (TP) and Low Frequency/High Frequency (LF/HF)) ratio was 1356.60±13 6.41(ms²) and 1.68±2.25, respectively. Conclusions: The results of this study suggest that clinicians can use Electrogastrography to enhance accuracy when diagnosing the SQD pattern.

• Korean Journal of Ecology and Environment
• /
• v.40 no.3
• /
• pp.439-448
• /
• 2007

The purpose of this study was to investigate the seasonal variations of sediment oxygen demand (SOD) in Lake Paldang and Lake Chungju of the Han River system and to suggest SOD values as parameters for the water quality prediction models of two lakes. SOD was measured at laboratory using sediment collected at 2 sites in Lake Paldang from June to November and at 4 sites in Lake Chungju from May to November in 2005, respectively. It was found from the laboratory test that the SOD in Lake Paldang ranged from 337.8 to 881.0 mg $O_2m^{-2}d^{-1}$ and in Lake Chungju ranged from 143.0 to 969.1 mg $O_2m^{-2}d^{-1}$. The SOD of Lake Paldang showed similar variations to the content of organic matter of sediment. The SOD of Lake Chungju was positively correlated with temperature (r=0.78, p<0.01), $PO_4-P(r=0.79,\;p<0.01)$, TP (r=0.55, p<0.05), DTP (r=0.55, p<0.05), $NO_3-N$ (r=(0.72, p<0.01) of hypolimnetic water. These results indicate that the SOD of Lake Paldang was affected by the content and origin of organic matter of sediment and the SOD of Lake Chungju was closely correlated with physical and chemical factors.

• Journal of Life Science
• /
• v.12 no.3
• /
• pp.264-273
• /
• 2002

We have isolated and artificially expressed three cDNA clones of Capsicum annuum PR5 genes for elucidating the antifungal activity against Phytophthora capsici which contracted a hot pepper root rot in field condition. Three divergent PR5 proteins from hot pepper were designated as CAPR5-1 and CAPR5-2 from susceptible cultivar (Subicho) as well as CAPR5-3 from resistant cultivar (CM331) in response to P. capsici. The cDNA similarity was found over 80% of identity among the three CAPR5s, and deduced amino acid sequence was characterized that all of CAPR5s contained 16 cysteine residues which possibly had a significant role in the structural formation. The result of genomic DNA blot showed that CAPR5-1 and CAPR5-2 existed as single copy in the Subicho genome. Three recombinant CPARs in E. coli were identified by SDS-PACE, and each expressed protein was treated on the PDA medium which contained cultured pathogens. Although three CAPR5 proteins did not affected the hyphal growth of Glomerella glycines and Colletotrichum fagenarium, CAPR5-1, CAPR5-2, and CAPR5-3 showed a specific antifungal activities against P. capsici.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1319-1325
• /
• 2000

Antimicrobial effects of the specific IgY separated from eggs which were laid by hens vaccinated with Streptococcus mutans were investigated. The comparison tests of vaccination, addition levels of crude specific IgY, and innoculation concentration were applied by microscopic observation and turbidity test. Ten% addition of crude specific IgY obtained from vaccinated hens showed agglomerative clusters of S. mutans cells in supernatants and sediments, while crude IgY produced by non-vaccinated hens showed no cluster. IgY addition above 5% showed agglutinating clusters of most S. mutans cells and there was definite difference between IgY addition below 2.5% and above 5%. Concentration tests of crude IgY revealed that antimicrobial effects were differentiated by addition level and addition over 10% produced satisfactory results with turbidity test. The cluster size was dependent upon concentration of crude IgY addition. $10^5\;cfu/mL$ inoculation showed agglutinated cells and extent of agglomeration was proportional to cell numbers. Study of inoculation levels showed that 10% addition of crude IgY decreased turbidity effectively regardless of number of S. mutans cells. Plaque formation decreased to 75% with 15% addition of specific IgY concentration. These results implied that IgY separated from eggs laid by S. mutans-vaccinated hens might prevent dental caries caused by S. mutans.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.52-62
• /
• 2006

The purpose of this study is to investigate the changes of modern Korean men's pants design from 1962 to 1998 by reviewing fashion magazine advertisements and pictorials. For theoretical study, the characteristics and the importance of apparel advertisements and the changes of modern Korean men's fashion trend were reviewed. For sample selection, first, 932 pictorials of men';s wear designs from Joongang Magazine, Shin Dong-A, Bokjangwolbo, Meot, Men's Life, WWD, and SFAA's photograph album, published from 1962 to 1998 were selected and then excluded some samples that could not clearly identify the pants design. Content analysis method was used to analyze the content of magazines and pictorials. The final samples are classified into pattern, color, length, silhouette, and existence or non-existence of turn-up. Frequency and $x^2$-test were conducted using a SAS statistics package to analyse the data. The results were as follows. ; (1) Solid pattern was the most prevailed throughout the last four decades and followed by stripe, check, the others, abstract, dot and floral. There is no significant difference in the type of men's pants pattern between each decade. (2) It showed a significant difference in colors of men's pants between decades. The colors in men's wear are divided into nine categories and the order of occurrence are as follows; multi-color is the most frequently shown and followed by brown, gray, blue, black, green, pink, yellow, and red. More various colors appeared over the period, however, multi color was the most popular in all decades but in the 60s. (3) Full length of pants style occupied more than 96% throughout all four decades. Due to the popularity of sports wear in men's fashion during the 90s, the shorts style appeared not only in sports wear and casual wear but also in suit style. (4) There is a significant difference in silhouette of men's pants between decades. The silhouette of men's pants were divided into four types and their order of occurrence are as follows; basic, baggy, fitted, and loose silhouette. Basic silhouette was the most prevailed throughout the whole four decades. (5) A significant difference was shown in the existence or non-existence of turn-up of men's pants between decades. Non-existence of turn-up of men's pants was the most prevailed throughout the whole four decades.

• Journal of Korean Neurosurgical Society
• /
• v.55 no.3
• /
• pp.136-141
• /
• 2014

Objective : The aims of this study are to identify interpersonal differences in defining coordinates and to figure out the degree of distortion of the MRI and compare the accuracy between CT, 1.5-tesla (T) and 3.0T MRI. Methods : We compared coordinates in the CT images defined by 2 neurosurgeons. We also calculated the errors of 1.5T MRI and those of 3.0T. We compared the errors of the 1.5T with those of the 3.0T. In addition, we compared the errors in each sequence and in each axis. Results : The mean difference in the CT images between the two neurosurgeons was $0.48{\pm}0.22mm$. The mean errors of the 1.5T were $1.55{\pm}0.48mm$ (T1), $0.75{\pm}0.38$ (T2), and $1.07{\pm}0.57$ (FLAIR) and those of the 3.0T were $2.35{\pm}0.53$ (T1), $2.18{\pm}0.76$ (T2), and $2.16{\pm}0.77$ (FLAIR). The smallest mean errors out of all the axes were in the x axis : 0.28-0.34 (1.5T) and 0.31-0.52 (3.0T). The smallest errors out of all the MRI sequences were in the T2 : 0.29-0.58 (1.5T) and 0.31-1.85 (3.0T). Conclusion : There was no interpersonal difference in running the Gamma $Plan^{(R)}$ to define coordinates. The errors of the 3.0T were greater than those of the 1.5T, and these errors were not of an acceptable level. The x coordinate error was the smallest and the z coordinate error was the greatest regardless of the MRI sequence. The T2 sequence was the most accurate sequence.