• Journal of Powder Materials
• /
• v.15 no.5
• /
• pp.399-404
• /
• 2008

Spray pyrolysis was applied to prepare $M_{3}MgSi_{2}O_{8}:Eu^{2+}$ (M=Ca, Sr, Ba) blue phosphor powder. The library of a Ca-Sr-Ba ternary system was obtained by a combinatorial method combined with the spray pyrolysis in order to optimize the luminescent property under vacuum ultraviolet (VUV) excitation. 10 potential compositions were chosen from the first screening. The emission shifted to longer wavelength as Ca became a dominant element and the emission intensity was greatly reduced in the composition region at which Ba is dominant element. On the base of the first screening result, the second fine tuning was carried out in order to optimize the luminescence intensity under VUV excitation. The optimal composition for the highest luminescence intensity was $(Ca_{1.7},\;Sr_{0.3},\;Ba_{1.0})Si_{2}O_{8}:Eu^{2+}$ which had the color coordinate of (0.152, 0.072) and about 64% emission intensity of $BaMgAl_{10}O_{17}$ (BAM) phosphor.

• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.67-73
• /
• 1990

The behavior of optical properties of ion exchanged glasses was investigated inthis study. The used glasses were soda-lime-silica glasses that were produced by float process. The coloring effect by Ag colloids is measrued by spectral transmittance, color coordinates, dominant wavelength and excitation purity resulting from silver ions exchange of glasses immersed into the mixed molten salt with AgNO3. Ion exchange coloring of glasses made it possible to obtain glasses with a range from yellow to brown, and transmittance was decreased with increasing the amount of Ag colloids which reduced from Ag+ions. Also, obtain from yellow to reddish brown with increasing purity by reheating treatment in air for ion exchanged glasses. The size of Ag colloids are 0.02~0.1${\mu}{\textrm}{m}$ with ion exchange conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.29-30
• /
• 2000

CaS:Pb thin film used as phosphor layer in electroluminescent devices were deposited by an atomic layer deposition (ALD). The photoluminescence emission and excitation spectra were measured at 5 and 300K for the $CaS:Pb^{2+}$ phosphors with different Pb concentration from 0.001 at.% to 0.648 at.%. The emission spectra of these samples were characterized as UV emission and blue emission with the center of peak around 360 and 425nm, respectively. The UV emission was dominant at the low $Pb^{2+}$ concentration of 0.001 at%, whereas with increase of Pb concentration, the blue emission became a major component and to longer wavelength.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.525-527
• /
• 2005

The LED light source has many excellent advantages for the application of LCD backlight module. As we know, the operational temperature can significantly influence the characteristics of LEDs. Heat can decrease LED's output light intensity and make its dominant wavelength (${\lambda}d$) drift. These two factors make display's color temperature change and induce different NTSC results. Here, we perform an important relation between NTSC and the above two factors of LED-LCD display.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.197-202
• /
• 2007

Most of seismic reflection prospecting assumes subsurface formation to be homogeneous media. These models are not capable of estimating small scale heterogeneity which is verified by well log data or drilling core. And those synthetic seismograms by homogeneous media are limited to explain various changes at field data. So we developed a inhomogeneous velocity model which can estimate inhomogeneity of background medium to implement numerical modeling from homogeneous medium and inhomogeneous medium on the model. Background medium using three autocorrelation functions in order to generate inhomogeneous velocity media was according to dominant wavelength of background medium and correlation length of random medium. And then we compared shot gathers. The results show that numerical modeling implemented at inhomogeneous medium depicts complex wave propagation of field data.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.437-442
• /
• 2004

We have fabricated a polymeric waveguide by using a hot embossing technique and have investigated its propagation loss. The replication of waveguide channels through the use of a hot embossing technique is of interest as a single-step process that could deliver surface roughnesses far smaller than the wavelength. We have evaluated experimentally that the sidewall roughness has a dominant effect on insertion losses of the multimode polymeric waveguide. The propagation loss of the waveguide decreased dramatically upon decreasing the sidewall roughness of the channel. We have confirmed that the preparation of waveguides having nanometer-scale sidewall roughness and 0.1 dB/cm propagation loss is possible when using the hot embossing technique.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.1 no.1
• /
• pp.7-41
• /
• 1983

Reproduced colors which are half-tone printed at the rate of 10,20,30, ...100% half-tone dot area by each process ink- cyan, magenta, yellow and at the rates of 0,30,60, 100% half-tone dot areas by the mean color mixing of black, cyan, magenta and yellow, are colorimetric analyzed by make use of the 1931 CIE XYZ system of color specification and matching the Munsell color system. Espacially, magenta and secondary colors which are contained magenta, do not have good uniformity and proportionalization in the dominant wavelength and the excitation purity. Half-tone colors without reflection of blue light, are reproduced ideal color with the excitation purity 100% in wavelengths from 555nm to 600nm.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.51-61
• /
• 2007

This paper concerns about the requirement analysis for night vision imaging system(NVIS), whose purpose is to intensify the available nighttime near infrared(IR) radiation sufficiently to be caught by the human eyes on a miniature green phosphor screen. The requirements for NVIS are NVIS radiance(NR), chromaticity, daylight legibility/readability, etc. The NR is a quantitative measure of night vision goggle (NVG) compatibility of a light source as viewed through goggles. The chromaticity is the quality of a color as determined by its purity and dominant wavelength. The daylight legibility/readability is the degree at which words are readable based on appearance and a measure of an instrument's ability to display incremental changes in its output value. In this paper, the requirements of NR, chromaticity, and daylight legibility/readability for Type I and Class B/C NVIS are analyzed. Also the rationale is shown with respect to those requirements.

• Applied Biological Chemistry
• /
• v.36 no.2
• /
• pp.115-120
• /
• 1993

For the elucidation of some information on processing properties of tomato, physicochemical characteristics of fruits were analysed for two group of cultivation pattern, non-proped cultivation (5 varieties) and groped cultivation (4 varieties). Weight, length, width, thickness and specific gravity were greater in the groped cultivation group than in the non-groped. Among the groped varieties, Master 2 showed the greatest values and 76Mo11-3-1-2-2 the smallest. Among the non-groped, weight, length, width and specific gravity were greatest in Jinhong and thickness was greatest in Good Hope and smallest in $79078{\times}ARC$. Hardness showed significant difference only among the non-groped resulting in the lowest value in $79078{\times}ARC$. Fruit sphericity was greater in the non-groped among which Good Hope was the greatest. In fruit color the non-groped showed greater trend in dominant wavelength, especially in Good Hope. No significant difference between group was found in lightness and % chroma. Sugar content showed higher trend in the non-groped and highest in Master 2. Acidity was significantly higher in the non-groped and highest in Good Hope. There was no difference in pH. Vitamin C was difference between group but higher trend in $79078{\times}ARC$. Viscosity was no difference between group but higher trend in $79078{\times}CL1561F6$ of the non-groped and 76Mo11-3-1-2-2-of the groped.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.956-965
• /
• 2000

In this paper, we propose an efficient traffic grooming algorithm to minimize to number of SONET ADMs which is the dominant cost of system in high speed optical ring networks. It is an optimal traffic grooming algorithm to be applied to both unidirectional ring and bi-directional ring under both uniform traffic and nonuniform traffic. The proposed traffic grooming algorithm consists of two subalgorithms : one is the algorithm to construct full connection-rings as many as possible to minimize gaps by cutting the connections and using redirection method, and the other is the algorithm to groom connection-rings into a wavelength to maximize the number of shared nodes. The simulation results show that the proposed algorithm is superior to conventional algorithm under various network conditions.