• Ecology and Resilient Infrastructure
• /
• v.8 no.1
• /
• pp.9-21
• /
• 2021

In this study, fish and flow surveys were conducted at 12 survey points to calculate the fish habitat suitability index of Miho Stream in the Geum River Water System. The field surveys were conducted four times from September 2019 to May 2020. The results show the presence of 8 families, 37 species, and 5,754 individuals. The number of water purification species that preferred waters with a low flow rate was the highest. The habitat suitability index was calculated according to the Washington Department of Fish and Wildlife method based on the populations collected at various water depths and flow rate sections and the flow rate survey results. For the dominant species, Zacco platypus and swimming species, the results were compared by calculating at Gasan Bridge and Palgye Bridge at the upper stream. The single species showed no significant difference between the upstream and downstream at water depths of 0.1 - 0.5 m and flow rates of 0.2 - 0.5 m/s. The species swimming ability was similarly calculated at water depths of 0.2 - 0.5 m and flow rates of 0.2 - 0.5 m/s. The dominant species, Pyramid, had a wide range of physical habitats. The habitat suitability index between the swimming species was similarly calculated. These results can be effectively used as basic data for calculating the environmental ecological flow rate and establishing a river restoration plan of the Miho Stream.

• Korean Journal of Environmental Biology
• /
• v.42 no.1
• /
• pp.15-27
• /
• 2024

The goal of this study was to provide basic data necessary for managing fish in the Seomgang River by confirming diversity of fish species in the Seomgang River and determining the degree of change in fish species through a comparison with earlier related work. Growth rate, obesity level, and temporal and spatial reproductive capacities were analyzed to determine growth characteristics of dominant species. Fish fauna and structure of the fish community were surveyed at three different time points from October of 2020 to August of 2021 at eight sites. In addition, growth characteristics of Zacco platypus from June of 2021 to July of 2022 at four sites were determined. A total of 3,999 individuals, 43 species, and ten families of fish were identified. Among these species, 19 (44.19%) were Korean endemic species and four (9.30%) were endangered species. The dominant species was Z. platypus. Pungtungia herzi was identified as a subdominant species. An analysis of length-weight relationships and condition factor (k) of Z. platypus confirmed a good state of growth. As a result of a frequency analysis of the total length, the life cycle of the Z. platypus population living in the Seomgang River was found to be stable. According to gonadosomatic index (GSI) analysis, the spawning season of Z. platypus was estimated to occur after May, consistent with the literature.

• Journal of Korean society of Dental Hygiene
• /
• v.2 no.1
• /
• pp.85-95
• /
• 2002

The purpose of this study was to examine dental hygienists' knowledge of implant operation, which is recently emerging as one of the important medical services in the dental treatment sector. It's ultimately intended to serve as a basis for the preparation of more effective, appropriate implant-education programs for dental hygienists and to help them, who take a crucial part in implant operation, provide better dental services to patients who are in need of implant operation. The subjects in this study were 368 selected dental hygienists who were working in the dental institutions in the region of Taegu. The results of this study were as below: 1. The largest number of the dental hygienists investigated, 34.1%, were at age 25 to 27. The second most common age was 24 and under, and the third most common age group was 28 to 30. For educational level, most of them, 91.0%, were junior-college graduates, and 9.0% were being in or graduated from four-year-course university. Concerning career, 52.7%, the greatest percentage, had worked for one to three years, and 41.3% had a four-year or higher career. 812%, most of them, were working in dental clinics, and 18.3% were serving in dental hospital or general hospital. 2. Many of the dental institutions were providing implant operation services, as the dental institutions where 64.9% of the subjects were working conducted implant operation. In relation to the necessity of implant operation, the dominant opinion, 73.0%, was thai it's needed to make oral slate healthier. So there was a strong tendency to ad mit implant as one of the necessary treatments in the dental treatment sector. 3. Their collective mean implant knowledge got $57.02{\pm}14.11$. And the collective average of 21 items was $2.7153{\pm}0.6720$ on the basis of 5 points, which was below the average(3 points of Likert scale). This meant that the dental hygienists didn't have a good knowledge or understanding of implant. When it's taken into account what role should be performed by dental hygienists, their implant knowledge should be increased. 4. As a result of examining the effect of the general characteristics on their implant knowledge, the educational level(t=-3.481, P=0.001) and the type of dental institution where they were working(F=16.476, P=0.001) made a significant difference. 5. Their implant knowledge was significantly different according to whether or not the dental institution they were serving conducted implant operation (t=7.199, P=0.001). And, whether or not they agreed to the necessity of implant operation also generated a significant difference to their implant knowledge(F=8.610, P=0.000).

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.111-122
• /
• 2000

In this study, A series of fatigue tests have been performed on the fillet welded joints of cover plates in steel plate girders in order to quantitatively assess the fatigue characteristics according to the shapes of cover plates. From the results of fatigue tests, it has been shown that the fatigue strengths were slightly different according to their shapes, but satisfied the fatigue design curves in Korea and other countries. Also, from the results of beachmark tests, it has been confirmed that the points of fatigue crack initiation were closely related to the shapes of weld bead toes, and fatigue cracks simultaneously initiated from several points in weld bead toes have been grown as semi-elliptical surface cracks, and these cracks have been coalesced each other, and grown as through thickness cracks, and finally reached to fracture. Besides, from the results of fracture mechanics approaches, stress gradient factors were the most dominant factors among crack correction factors obtained from the existing equations and finite element analysis, and the fatigue life on fillet welded joints of cover plates could be estimated using the relations between fatigue crack growth rate and stress intensity factor range obtained from finite element analysis.

• Journal of Korea Water Resources Association
• /
• v.48 no.5
• /
• pp.367-377
• /
• 2015

ADCPs have been highlighted so far for measuring steramflow discharge in terms of their high-order of accuracy, relatively low cost and less field operators driven by their easy in-situ operation. While ADCPs become increasingly dominant in hydrometric area, their actual measurement accuracy for velocity and bathymetry measurement has not been sufficiently validated due to the lack of reliable bench-mark data, and subsequently there are still many uncertain aspects for using ADCPs in the field. This research aimed at analyzing inter-comparison results between ADCP measurements with respect to the detailed ADV measurement in a specified field environment. Overall, 184 ADV points were collected for densely designed grids for the given cross-section that has 6 m of width, 1 m of depth, and 0.7 m/s of averaged mean flow velocity. Concurrently, ADCP fixed-points measurements were conducted for each 0.2m and 0.02m of horizontal and vertical spacing respectively. The inter-comparison results indicated that ADCP matched ADV velocity very accurately for 0.4~0.8 of relative depth (y/h), but noticeable deviation occurred between them in near surface and bottom region. For evaluating the capacity of measuring bathymetry of ADCPs, bottom tracking bathymetry based on oblique beams showed better performance than vertical beam approach, and similar results were shown for fixed and moving-boat method as well. Error analysis for velocity and bathymetry measurements of ADCP can be potentially able to be utilized for the more detailed uncertainty analysis of the ADCP discharge measurement.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.44-52
• /
• 2003

In this work dynamic heat transfer in a CPFS (cable penetration fire stop) system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealant. Dynamic heat transfer in the fire stop system is formulated in a parabolic PDE (partial differential equation) subjected to a set of initial and boundary conditions. First, the PDE model is divided into two parts; one corresponding to heat transfer in the axial direction and the other corresponding to heat transfer on the vertical planes. The first PDE is converted to a series of ODEs (ordinary differential equations) at finite discrete axial points for applying the numerical method of SOR (successive over-relaxation) to the problem. The ODEs are solved by using an ODE solver In such manner, the axial heat flux can be calculated at least at the finite discrete points. After that, all the planes are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The initial condition of each finite element can be obtained from the above solution. The heat fluxes on the vertical planes are calculated by the Galerkin FEM (finite element method). The CPFS system was modeled, simulated, and analyzed here. The simulation results were illustrated in three-dimensional graphics. Through simulation, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable stream, and that dynamic heat transfer through the cable stream was one of the most dominant factors, and that the feature of heat conduction could be understood as an unsteady-state process.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.99-106
• /
• 2010

A vertical datum requires an origin, which is a point on the Earth's surface where the height of the point is a defined value(26.6871m). From this origin point, heights (height differences) can be measured to any other point using standard leveling and gravity measurement procedures. However, the leveling network over the Korea bas been established by using the normal gravity instead of the actual gravity values, and the heights for the points are published by National Geographic Information Institute (NGII). This may cause height for especially in the area where high-relief mountains are dominant. Therefore, the height errors caused by using normal gravity instead of actual gravity values are analyzed in this study. Then, the differences between the orthometric heights and the published heights, i.e., normal orthometric height are analyzed.

• Journal of Korean Society on Water Environment
• /
• v.36 no.3
• /
• pp.194-205
• /
• 2020

The characteristics and behavior of dissolved organic matter (DOM) were determined by analyzing the molecular weight fractions and fluorescence properties of water samples in the downstream Nakdong River. Biogeochemical water quality parameters and fluorescent dissolved organic matter (FDOM) were analyzed at five sampling points in the downstream area of the Nakdong River January-August 2019. The molecular weight fractions of the DOM were separated by the Liquid Chromatography-Organic Carbon Detection (LC-OCD). The DOM predominantly comprised humic substances, followed by the building blocks, low molecular weight neutrals and biopolymers. The hydrophobic (aromatic) and hydrophilic properties were shown as coexisting, as most of the SUVA_254nm values were under four. The FDOM was characterized as humic-like (FDOM_H) with allochthonous origin and protein-like (FDOM_P) with autochthonous origin; the FDOM_H with autochthonous origin was also identified. The FDOM_H relies on the aromaticity of the allochthonous organic matter and increases during summer. The FDOM_H and FDOM_P, which depend on the biodegradable dissolved organic matter from phytoplankton, were highly fluorescent in winter. The allochthonous organic matter was the dominant factor contributing to the behavior of the DOM, externally introduced to the river by rainfall. The FDOM only minimally contributed to the behavior of the DOM. It can be explained as the seasonal characteristics of the DOM, varied by the source of the organic matter.

• Journal of Wetlands Research
• /
• v.14 no.3
• /
• pp.413-418
• /
• 2012

In this study, both habitat use analysis by rumen contents of Eurasian river otter (Lutra lutra) were carried out to investigate the preference of habitat environment and diet using their fecal samples. As the target sites, two streams (the Naechon-cheon and the Koonup-cheon) were selected in the upstream of the Hongcheon river, Hongcheon County, Gangwon Province. A total of 478 track samples (e.g., feces, scent and footprint) were found during the survey periods (May to November, 2009 and November, 2010). The dominant points, where the tracks of river otters were observed, were areas with the low depth(0.5-1m) and the slow flow velocity (5m/sec). Also, both rocks and rock-beds were preferred but artificial facilities were avoided. This ecological study of river otters using habitat use analysis and diet analysis by rumen contents will be useful fundamental information to conserve the river otter populations, and to protect their habitats.

• Journal of Wetlands Research
• /
• v.10 no.2
• /
• pp.105-114
• /
• 2008

Growth in population and urbanization has progressively increased the loadings of pollutants from non-point sources as well as point sources. Separated sewer overflows(SSO) have been considered as a major cause of water-quality deterioration of natural water-courses in the vicinity of the heavily urbanized areas. The factors defining the magnitude and occurrence of SSO are site-specific. It is important to know exact properties of pollutants contained in SSO to address water quality impacts that are caused by SSO inputs to the receiving waters. Site and event parameters found to have significant influences on urban runoff pollutant EMCs include total event rainfall, antecedent dry period, rainfall intensity. In this study, a field survey was carried out in some selected areas of Cheongju city. Literature from previous similar studies was consulted and some important factors affecting the runoff characteristics of urban drainage areas were analyzed for some selected survey points. It was found that the factors most affecting BOD are the number of dry days prior to rainfall and the intensity of the rainfall. The factor most affecting CODcr is the number of dry days prior to rainfall. The factors most affecting SS are the amount of rainfall and the number of dry days prior to rainfall. The factor most affecting TN is the amount of rainfall. The factor most affecting TP is the amount of rainfall and the number of dry days prior to rainfall.