• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.193-195
• /
• 2008

Safety is important factor in railway system. Now most of the electric and electronic system which is applied in railway system is the embedded system which software is used. The constitution rate of software which is involved in railway system is gradually increasing. Most of the software which is used in railway system is implemented by the software developer. Thus the implemented code has different features according to the developer and this may cause the bad effect on the software's maintenance. International standard IEC 62279 requires an adoption the coding standard to developing the railway software. And it is plan to recommend complying with the coding standard in safety criteria for railway software which is noticed as the regulation of the Korean railway safety law. In this paper, we review the requirement of coding standards which is present in the software criteria for railway software and international standard. Also it investigates the coding standard which is in other safety related industry and presents the effective way to apply the software coding standard to domestic railway industry.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.57-63
• /
• 2002

미국 건설시장은 미국 전체 경제에 지대한 영향을 미치고 있다. 최근 통계에 의하면 미국 건설산업은 연간 약 4천억 달러 규모로 미국 GDP의 $4.5\%$을 차지하고 있다. 그리고 건설산업내의 치열한 경쟁 때문에 성과와 프로세스의 개선을 위해 벤치마킹이 관심을 끌고 있다. 본 글에서는 CII Benchmarking and Metrics 프로그램의 전반적인 소개와 현재까지 수집된 데이터베이스 그리고 데이터를 통계적으로 분석하여 회원사에게 제공하는 결과물을 소개하고 있다. 벤치마킹을 한국 건설시장에 도입하는 것은 한국 건설산업의 경쟁력 제고를 위한 한 방안이 될 것이다.

• 한국정보통신학회논문지
• /
• 제3권4호
• /
• pp.819-830
• /
• 1999

NAVTEX system is an international automated direct-printing service, broadcast on 5181kHz and 490kHz, for the promulgation of navigational and meteorological warnings and urgent information to ships. With our government's adoption of the international convention for SAR(Search and Rescue) in 1993, various trials for the installation of NAVTEX system have been executed by the government committee, relating laboratory and experts. An important consideration of the installation for NAVTEX system is the availability that could broadcast messages written in korean letter. Also, the receiver which can process the signal demodulated from the two frequencies, 518kHz and 490kHz, should be developed and supplied in domestic. In this paper, the code table and algorithm for conversions between NAVTEX characters and Korean Letters are studied, and signal processing techniques of code conversion are developed. Circuit design and implementation of the NAVTEX simulator using the Direct Digital Synthesizer are discussed, code conversion algorithm and signal processing technique of the NAVTEX transmission are programmed in its circuits. For evaluating the its functional characteristics, receiving module which has I-Q channel structure is designed. From the measurements of simulator, the characteristics show the frequency stability of the $(\pm)2Hz$ and Spurious free dynamic range is -63dBc. And the simulator can generate simultaneously wanted signal and several interfere signals. So, its capability is valuable for designers of the transmitting system and NAVTEX receiver, for provider as testing facilities of the type approval.

• Asia pacific journal of information systems
• /
• 제20권4호
• /
• pp.25-51
• /
• 2010

This study compares and contrasts the intellectual development of the MIS field in Korea from 2005 to 2009 to that of international trends by using a keyword co-occurrence network analysis of the two flagship journals: APJIS and MIS Quarterly. From 316 research articles in these two journals, 132 unique and most frequently co-occurred keywords were put into analysis. The results of structural equivalence show a mild correlation between APJIS and MIS Quarterly. The e-commerce, trust, and technology adoption are the high frequency keywords in both journals. In Korea e-learning, purchasing, and recommendation systems turn out to be important keywords while outsourcing, research method, quantitative method, design research, information theory, and empirical research are in average international journals. This connotes that the Korean scholarship tends to focus more on practically oriented topics, but the clustering and relational mapping of research topics in each journal show a mild level of overlap with distinctive orientations due to intrinsic disparities depending on the concerned journals' geographical scopes, namely domestic or global.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.195-204
• /
• 2018

A pilot scale study was conducted on a down-flow hanging sponge (DHS) reactor installed at a sewage treatment plant in Banda Aceh, Indonesia for treatment of desludging septic tank wastewater. Raw wastewater with an average biochemical oxygen demand (BOD) and total suspended solids of 139 mg/L and 191 mg/L, respectively, was pumped into the reactor. Two different hydraulic retention times (HRTs, 3 h and 4 h) were investigated, equivalent to organic loadings of 1.11 and $0.78kg\;BOD/m^3/d$, respectively. The average BOD concentration in the final effluent was 46 and 26 mg/L at HRTs of 3 and 4 h, respectively. The concentration of retained sludge along the reactor height was 10.2-18.7 g VSS/L-sponge, and the sludge activities were 0.24-0.32 and 0.04-0.40 mg/g VSS/h for heterotrophs and nitrification, respectively. Values of water hold-up volume, dispersion coefficient, and number of tank in-series found from tracer studies of clean sponge and biomass-loaded sponge confirmed that growth of retained sludge on the sponge module improved hydraulic performance of the reactor. Adoption of the DHS reactor by this Indonesian sewage treatment plant would enhance the role of the current desludging septic tank wastewater treatment system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.795-798
• /
• 2015

방송통신 기술기준은 국가에서 정하는 강제표준으로서 통신사업자 및 관련 기관이 준수해야 하는 의무적 사항을 규정하고 있다. 기술기준은 새로운 통신서비스 및 기술의 발전을 적시에 반영하여 국내 도입에 대한 제도적 기반을 마련하여야 한다. 본 논문에서는 기술기준은 제개정의 로드맵 수립에 대한 방법론 및 중단기 기술기준 개정방향에 대해 같이 논하기로 한다.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.171-178
• /
• 2016

In engineering industry, technical documentation refers to any type of documentation that describes handling, functionality and architecture of a technical product. The intended audiences for product technical documentation is the end user, the administrator, service or maintenance technician. Competition and rapid technological evolutions have created pressure to release new and improved products on an increasingly frequent basis. As the technical capabilities of products advance, the technical documentation for those products is becoming longer and complex. The Darwin Information Typing Architecture (DITA) is and XML-based, end-to-end architecture for authoring, producing, and delivering technical documents. DITA is an OASIS standard that allows documentation groups to single-source document for multiple products and users, to automatically publish that documentation in several media formats including PDF and HTML, and to efficiently maintain and update that documentation. This paper study on the various implementation projects for technical documentation using OASIS DITA standard and examines the potential for using DITA as a solution for reconstructing existing technical documentation. Also We offer an incremental adoption approach to effectively implement DITA standard of technical documentation project for domestic firms, while reducing failures.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.93-98
• /
• 2003

High speed precision machines have been introduced to the CNC industry in order to improve productivity, shorten the appointed date of delivery and reduce the prime cost. High speed machines have more functions then general machines, and they were proved in performance. The production and sales of the high speed machines have been increased not only in domestic market but also all over the world. Accordingly, machines are faster, there are lots of problems to be solved. One of the most difficult problems is the thermal displacement on the main spindle due to generated heat while the spindle is rotated in high speed. Since the thermal displacement directly effects the quality of the machined parts, utmost efforts to minimize the thermal displacement have to be given from the beginning of designing machines. In practice, variety of methods are attempted and practiced to minimize the thermal displacement such as design of symmetrical frame, adoption of high speed bearings, application of compensation system using non-contact sensor and use of forced circulating lubrication system with oil cooler. Even if these variable methods have been practically used in the industrial field, generated heat has not been Perfectly Prevented lienee, in this paper, the characteristics of thermal displacement were investigated when several kinds of oil were tested for a high speed machine with forced circulating lubrication system within the same atmosphere and under the same conditions.

• 한국건설관리학회논문집
• /
• 제5권3호
• /
• pp.137-145
• /
• 2004

최근 정보기술(IT)의 발전에 힘입어 품질관리 정보를 통합하여 그 활용의 정도를 극대화하려는 노력이 대형 종합 건설회사를 중심으로 여러 방면에서 이루어지고 있으며, 이에 건설업계는 품질정보를 통합 관리하는 시스템의 구축에 많은 관심과 노력을 기울이고 있다. 몇몇 앞서가는 업체들은 시스템의 구축을 완료하여 현장에 적용시키는 단계에 있으나 이는 몇몇 대형 종합 건설업체에만 국한되어 있다고 볼 수 있다. 따라서 본 연구는 품질 관리 정보 시스템의 개발 및 도입을 위한 평가모델을 구축하는데 필요한 기초자료를 제공하기 위해 대형 종합 건설회사들의 품질관리 정보시스템의 기능별 특징 및 제반 사항을 살펴보고 결과중심의 시스템과 프로세스 중심의 시스템으로 분류하여 그 성향들을 분석하여 보았다.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.47-53
• /
• 2004

High speed precision machines have been introduced to the CNC industry in order to improve productivity, shorten the appointed date of delivery and reduce the prime cost. High speed machines have more functions then general machines, and they were proved in performance. The production and sales of the high speed machines have been increased not only in domestic market but also all over the world. Accordingly, machines are faster, there are lots of problems to be solved. One of the most difficult problems is the thermal displacement on the main spindle due to generated heat while the spindle is rotated in high speed. Since the thermal displacement directly effects the quality of the machined parts, utmost efforts to minimize the thermal displacement have to be given from the beginning of designing machines. In practice, variety of methods are attempted and practiced to minimize the thermal displacement such as design of symmetrical frame, adoption of high speed bearings, application of compensation system using non-contact sensor and use of forced circulating lubrication system with oil cooler. Even if these variable methods have been practically used in the industrial field, generated heat has not been perfectly prevented. Hence, in this paper, the characteristics of thermal displacement were investigated when several kinds of oil were tested for a high speed machine with forced circulating lubrication system within the same atmosphere and under the same conditions.