• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.207-214
• /
• 2023

Ships emit significant amounts of air pollution. To reduce ship emissions, the government has implemented the Eco-Friendly Ship Act to improve the marine air environment, under which the use of eco-friendly ships that use eco-friendly energy as a power source encouraged and technologies to reduce marine pollution are developed. Therefore, the revision of relevant laws and systems such as inspection and facility standards for the safe operation of eco-friendly ships is urgently needed, especially those for fishing vessels, which account for the majority of domestic coastal vessels. This study defines the core equipment for the application of electric complex propulsion systems to fishing boats and presents a minimum safety standard plan for the adoption and dissemination of eco-friendly fishing boats.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.628-638
• /
• 2023

Maritime Autonomous Surface ships(MASS) are gradually gaining importance. Until fully autonomous ships are developed, they will likely be controlled by remote operators who are based in a Remote Operations Center. However, there is currently no internationally or domestically established licensing for them. This issue can potentially pose a risk to navigation safety due to operations being handled by unqualified remote operators. We conducted a literature review and proposed criteria for the adoption of a licensing system for remote operators. We have futher offered alternatives to integrate this license into the existing officer licensing system, and analyzed them using Analytic Hierarchy Process(AHP). Subsequently,, theprimary need to enact legislation for remote operators is observed. The most preferred approach is to include the occupation of a remote operator in the Ship Officer Act, Article 4: Occupational Categories and Class of Licenses. Therefore, it would be logical for the organizational structure of the Remote Operation Center to mirror the traditional Bridge Resource Management. This study will contribute to the efficient training of remote operators and the safe navigation of autonomous ships with a focus on human resource management.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.2
• /
• pp.261-271
• /
• 2024

The widespread adoption of aluminum slab formwork in modern construction, evident in both domestic and international projects, offers numerous advantages. However, a critical challenge persists regarding the dismantling process for these slabs. The current industry standard involves dropping the slabs to the ground floor upon removal. This practice raises several concerns, notably the generation of significant noise pollution that disrupts nearby communities. More importantly, the risk of worker injuries due to falls from height during the dismantling process is a serious safety hazard. Additionally, the impact from dropping the slabs can damage the aluminum itself, leading to increased replacement costs. These drawbacks necessitate the exploration of alternative dismantling techniques that prioritize worker safety, material sustainability, and overall process efficiency. Accordingly, in this study, when the entire first-generation slab formwork of an apartment house is simultaneously lowered to a reachable position for workers, it is then disassembled and lifted for transport to the next floor. This approach has the potential to demonstrate improvements in safety, quality, economy, and process efficiency.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.225-238
• /
• 2012

This research measured the current working conditions and workers' awareness of their working conditions in both information technology industry and non-information technology industry. Furthermore, the research analyzed the characteristics of pertaining industries and age, sex, and job status of the workers to diagnose the current status of the working conditions and awareness of domestic workers in information technology industry in Korea. The purpose of this research is to provide the necessary data to establish the policy that guides ramifications to the current problems to restore the fame that Korea earned as one of the top information technology countries, and that requires a thorough paired comparison analysis between the information technology industries. The paired comparison analysis indicated that the information technology industries generally have had much worse working conditions than non-information technology industries. This research also verified that information technology industries have scored low on the satisfaction to the average working hours, employee welfare, social perception by other industries, the degree of anxiety, and the growth potential compared to the non information technology industries. Data collected during this research is meaningful in a sense that it provides basic yet crucial information that encourages the policies that are in favor of information technology employees to be adopted. The fact that there is a tacit skepticism in improvement of working conditions among the information technology workers supports the adoption of better policies that will improve not only working conditions but also find the solutions to eliminate the sources of insecurity of the retirement in information technology industry.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.185-195
• /
• 2011

Aircraft-related accidents cause mass casualties and major material damages. At present, runway-related accidents in our country account for 28% of all air accidents. Furthermore, internationally 33% of all air accidents is connected with runway. To prevent these accidents, FAA mandates the installation of aircraft rapid arresting system(ARAS) at the runway end safety areas which do not meet the FAA requirements. Even if the areas satisfy the conditions, FAA recommends the installation of ARAS to ensure the safety. In accordance of the international affairs, the domestic studies for ARAS are in progress and the legal formalities for domestic adoption of ARAS is under way. In this study, we analyzed the stopping distance, drag force, vertical force and tire penetration of runway overrun to assess the performance of ARAS reasonably by using two different kinds of analysis programs. The first is ARRESTOR program adopted by FAA, and the second is LS-DYNA which is available for 3-dimensional nonlineal dynamic analysis. As a result, analytically the stopping distances between two programs are similar. The drag force is rather different, but the tendencies are similar. Later on, the 3-dimensional simulation analysis considering various air-craft condition and properties of packaging materials is necessary. In addition, ongoing development of simulation analysis program is required for more accurate analistic results.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.91-99
• /
• 2013

There are many reasons for decommissioning of cyclotron such as not only age-related deficiency, any serious wear or damage but also relocation, upgrade and changing mission. Decommission of cyclotron in USA and EU give rise to a lot of low-level radioactive waste and costs. Various research on decommissioning of particle accelerator have been carried to reduce the cost of decommissioning in USA and EU. In USA, the NRC require DFP (Decommissioning Funding Plan) to authorized licenser by 10 CFR Part 30.35. To resolve radioactive waste problem and reduce the estimated cost of cyclotron decommissioning, we should consider technical aspects (decommissioning procedures, decontamination techniques, etc.) and safety aspects(residual radioactivity, the expected dose, etc) for decommissioning. In this study, we analyzed practical information on the decommissioning of cyclotron in ANL (Argonne National Laboratory) and Belgium (EU). And we investigated the experience on the cyclotron relocation from SNUH (Seoul National University Hospital) to SKKU (Sungkyunkwan University). From these results, we provide the basic data for establishing of relevant standards on domestic cyclotron decommissioning. It is necessary to adopt the DFP for safe and economic decommissioning and waste recycling. These result could be utilized for the establishment on the standards and useful requirements.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.95-104
• /
• 2017

Recently, patent information related to building information modeling (BIM) has been increasing owing to BIM adoption within the construction sector. However, only a few research studies have focused on identifying trends in the domestic and foreign BIM technology based on comprehensive and objective data. Therefore, this study aims to analyze technical competitiveness in the global BIM market using patent information. The patent information is compiled from WIPSON and consists of 73 South Korea, 59 USA, 206 China, and 31 Japan applications. Based on patent information, this study objectively observes domestic and foreign technological BIM trends. As a result of the technology entry analysis by the year, starting from physics (G section) to electricity (H section), the performing operations (B section), and the fixed structure (E section) has been expanded gradually. According to the portfolio analysis, the BIM patent is currently in its early stage of development. Through this research, utilizing patents as a basis for future development will be expected to consult with the differentiation of strategy and setting of direction.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.101-111
• /
• 2015

The modular construction method has been getting more attention followed by global eco-friendly trend as the domestic construction industry has focused more on remodeling and extension work. The modular construction method is an industrialized construction system which is not likely as the existing construction method it manufactures more than 70% modules at the factory then assembling can be completed in a short amount of time on site. The modular construction method has various strengths; shortening of construction period by on-site work decrease, weight pressure reduction by usage of light steel frames and cost saving by repetitive manufacturing. However, it is currently not expanded due to the existing commercialized construction method. Therefore, this research is in order to help the related authorities make decisions to select the construction method and motivate expansion of modular construction method which can be utilized effectively in the extension works. The intention of this research is to stress differentiation from other construction methods in construction period, construction expenses, labor and forces by comparing and analyzing actual cases, to inform competitiveness of modular construction method by concrete effect analysis and to support adoption of the modular construction method into the domestic industry.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.1
• /
• pp.119-157
• /
• 2019

It is important for the people in the 3D printing industry to determine which factors influence the decision-making that determine the adoption of 3D printers and the role of the factors. Through this, we intend to find ways to contribute to the development of 3D printing industry in Korea by increasing utilization of 3D printer used in domestic companies and increasing investment in related industries. 3D printers are making rapid progress according to the development of technology, the public interest, and the activation of investment. Foreign countries have made remarkable progress in equipment, materials, software, and industrial applications, but they are lower than expected in Korea. It is necessary to introduce a smooth 3D printer in order to revitalize the 3D printer industry and enlarge the base, but it is insufficient for actual introduction and field application. The independent variables that represent economic, technological, and environmental characteristics were selected through a literature survey, and a model for accepting integrated technology for convergence of societies in the 3D printing industry was proposed. This study confirms that economic factors such as output unit price, government support, and environmental factors such as 3D contents should be developed organically for the introduction of 3D printing technology and equipment. This require systematic and effective support from the government, and it is necessary to improve the economic support, related laws, and systems that can be directly experienced by the user as a user. As the domestic 3D printing industry develops with economic, technological and time investment, 3D printing industry should be the key engine of the 4th industrial revolution.

• Journal of the Daesoon Academy of Sciences
• /
• v.34
• /
• pp.203-238
• /
• 2020

This paper focuses on legal risks and risk management affecting foreign religions or foreign religious legal persons in Taiwan. Beginning with an overview of relevant legal norms, types, processes, precautions, other such considerations, the purpose of this paper is to assist foreign religions when they first come to Taiwan for development. The contents of this paper can inform the adoption of a suitable methodology. If foreign religions want to come to Taiwan to develop, there may be several methods for their development: 1. Send Individual Missionaries to preach in Taiwan 2. Send Groups to Preach in Taiwan: 1) specify these groups as temples (or religious groups called "Lingtai (靈臺)"). 2) form civil associations or unincorporated religious groups 3) cases of temples that have not been registered (or specified as "Lingtai") 4) cases of offices and independent property and religious purposes that are not registered with the government or registered as temples (differentiated from item 3) 3. Establishing a research center in Taiwan: When foreign religions have established religious consortia in foreign countries, they can come to Taiwan to set up branches. 4. The establishment of legal persons in Taiwan: These are divided into "school legal persons", "religious corporate legal persons" and "religious consortium legal persons." Each of the above types has a different law applicable to it. This article will introduce the contents of each applicable law and important related matters such as the relevant funds, setting incentive rules for outstanding religious groups, and religious groups applying for foreigners. Due to foreign-related factors in the development and setting up of foreign religions in Taiwan, Act Governing the Choice of Law in Civil Matters Involving Foreign Elements is the parent law for solving conflicts regarding laws and regulations. The spirit of Article 2 and Italian Private International Law, Article 25, Paragraph 1 and so on, adopts the legalism of establishing legal personhood. It is clear that the national law regarding legal persons is the law under which it was incorporated. Therefore, foreign religious legal persons who encounter legal issues in Taiwan fall under the national law, which was established as domestic law. Therefore, internal matters regarding foreign legal persons are also applicable to domestic law.