• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.107-119
• /
• 2017

PURPOSES : The desire of drivers to increase their driving speeds is increasing in response to the technological advancements in vehicles and roads. Therefore, studies are being conducted to increase the maximum design speed in Korea to 140 km/h. The stopping sight distance (SSD) is an important criterion for acquiring sustained road safety in road design. Moreover, although the perception-reaction time (PRT) is a critical variable in the calculation of the SSD, there are not many current studies on PRT. Prior to increasing the design speed, it is necessary to confirm whether the domestic PRT standard (2.5 s) is applicable to high-speed driving. Thus, in this study, we have investigated the influence of high-speed driving on PRT. METHODS : A driving simulator was used to record the PRT of drivers. A virtual driving map was composed using UC-Win/Road software. Experiments were carried out at speeds of 100, 120, and 140 km/h while assuming the following three driving scenarios according to driver expectation: Expected, Unexpected, and Surprised. Lastly, we analyzed the gaze position of the driver as they drove in the simulated environment using Smarteye. RESULTS : Driving simulator experimental results showed that the PRT of drivers decreased as driving speed increased from 100 km/h to 140 km/h. Furthermore, the gaze position analysis results demonstrated that the decrease in PRT of drivers as the driving speed increased was directly related to their level of concentration. CONCLUSIONS : In the experimental results, 85% of drivers responded within 2.0 s at a driving speed of 140 km/h. Thus, the results obtained here verify that the current domestic standard of 2.5 s can be applied in the highways designated to have 140 km/h maximum speed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.899-905
• /
• 2016

Wireless access in vehicle environment (WAVE) communication is currently being researched as core wireless communication technologies for cooperative intelligent transport systems (C-ITS). WAVE consists of both vehicle to vehicle (V2V) communication, which refers to communication between vehicles, and vehicle to infrastructure (V2I) communication, which refers to the communication between vehicles and road-side stations. V2I has a longer communication range than V2V, and its communication range and reception rate are heavily influenced by various factors such as structures on the road, the density of vehicles, and topography. Therefore, domestic environments in which there are many non-lines of sight (NLOS), such as mountains and urban areas, require optimized communication channel modeling based on research of V2I propagation characteristics. In the present study, the received signal strength indicator (RSSI) was measured on both an experience road and a test road, and the large-scale characteristics of the WAVE communication were analyzed using the data collected to assess the propagation environment of the WAVE-based V2I that is actually implemented on highways. Based on the results of this analysis, this paper proposes a WAVE communication channel model for domestic public roads by deriving the parameters of a dual-slope logarithmic distance implementing a two-ray ground-reflection model.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.529-536
• /
• 2003

In domestic case occurrence of cut slopes according to construction and expansion of road is necessary more than 70% of country has been consisted of mountain area. In the case of Kang-won Do, there are much mountains locals in road wiping away a disgrace and expanded and slant is connoting collapse danger of incision side by each kind calamity being urgent. When route alteration enforces disadvantageous road extension, stability examination and processing way about large slope happened are serious. During road extension work in the Kang-won DO secure stability for falling rock of road slope and failure that happen and established suitable reinforcement and countermeasure in reply in necessity. The Slope is divided rock slope and soil slope, and then in order to analysis soil slope apply LEM theory. And rock slope examined stability about stereographic projection and wedge failure. Is going to utilize in reinforcement and failure prevention if it is efficient cutting as reinterpreting stability and secure stability and wish to consider effective and robust processing plan of great principle earth and sand side, and present countermeasure inside with these data hereafter applying suitable reinforcement countermeasure about unstable section.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.521-529
• /
• 1997

Noise pollution, especially road traffic noise-in terms of population exposure-has become a major problem in Seoul. However, although noise can be sensed directly, it is considered somewhat less important compared to other environmental pollutions. In this study, we chose nine districts in Seoul and distributed a questionnaire containing 23 questions in related to the awareness of noise pollution for 950 people living in Seoul. The results were analyzed according to the citizens' awareness on the whole, age, occupation, and were compared to the actual noise level measured by the Seoul Metropolitan Government. The analysis of the questionnarie show that road traffic noise is considered to be the main source of noise pollution in Seoul. People think that the individual and the Seoul Metropolitan Government are most responsible for the noise reduction in Seoul, but replies only little effort is put into when asked whether one has made any personal effort to reduce noise. We have concluded that noise pollution is not considered a hazardous problem to most Seoul citizens, and that most of them seem to be used to it. Yet, specific noise reduction policies, especially road traffic noise, are expected to take effect as quality of life is pursued due to economic enhancement.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.5
• /
• pp.82-91
• /
• 2011

In this paper, a planar model for mechanics of a vehicle/pedestrian collision incorporating road gradient is derived to evaluate the pre-collision speed of vehicle. It takes into account a few physical variables and parameters of popular wrap and forward projection collisions, which include horizontal distance traveled between primary and secondary impacts with the vehicle, launch angle, center-of-gravity height at launch, distance from launch to rest, pedestrian-ground drag factor, the pre-collision vehicle speed and road gradient. The model including road gradient is derived analytically for reconstruction of pedestrian collision accidents, and evaluates the vehicle speed from the pedestrian throw distance. The model coefficients have physical interpretations and are determined through direct calculation. This work shows that the road gradient has a significant effect on the evaluation of the vehicle speed and must be considered in accident cases with inclined road. In additions, foreign/domestic empirical cases and multibody dynamic simulation results are used to construct a least-squares fitted model that has the same structure of the analytical one that provides an estimate of the vehicle speed based on the pedestrian throw distance and the band within which the vehicle speed would be expected to be in 95% of cases.

• Smart Media Journal
• /
• v.12 no.11
• /
• pp.95-102
• /
• 2023

Road accidents not only caused loss of human lives but also costed 3% of gross domestic product in most of the countries. The road accidents pose significant challenges to public safety and urban transportation management. There is a need to identify the high-risk area of accidents along with the critical day of week and vulnerable time period in order to implement effective preventive measures and optimizing the resource allocation. We collected 5,012 accident data from 대구교통종합정보. This study identified the high-risk locations, days of week, and time periods for accidents in Daegu and estimated the conditional probabilities of accidents occurring based on combinations of location, day of the week, and time period. The result is visualized in the form of dashboard in Tableau. This study holds substantial practical significance for urban planners, transportation authorities, and policymakers in Daegu to strategically allocate resources for traffic management, law enforcement, and targeted safety campaigns.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.109-110
• /
• 2023

Domestic ultra-hard road repair materials require a lot of time before the road can be opened to traffic. Therefore, in this study, Methyl Methacrylate (MMA) based road repair material was used to improve the above problems. Furthermore, the basic physical properties of MMA-based pavement repair materials are examined to confirm their suitability in concrete pavements. For this study, two types of MMA road repair materials (A type and B type) were selected. Then, the curing of the test specimens prepared for painting was carried out under three conditions. The experimental items were viscosity (drop time) and drying time (set to touch, dry-hard). As a result of the experiment, viscosity (drop time) was faster in type A than in type B. The drying time results were as follows. In the case of set ti touch, both type A and type B dried in about 10 minutes regardless of the curing conditions. In the case of dry-hard, regardless of the curing conditions, A type dried longer than B type, but it dried faster than conventional road repair materials. Therefore, within the scope of this study, it is considered that A type has a high potential for utilization as a road repair material.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.1-11
• /
• 2006

This study conducts a theoretical research on road traffic noise. Also, the domestic road noise forecast models were compared each other and analyzed with advanced countries' models to indicate the application possibility and problems. For the establishment of a general formula, we compared the forecasted value with the actual value applied in the formula proposed by the National Environment Institute, and examined the necessary improvement of the domestic road traffic noise forecast model. Also, a regression model was built to examine the relationship between traffic factors and noise. The traffic volume and speed are the main traffic factors used in this formula to affect the noise. From the results, it was found that the speed had a closer relationship with the noise rather than the traffic volume. Therefore, to decrease road noise, it is more important to control traffic speed. The spatial effect of road traffic noise within the apartment complexes was used in the case study to derive location-specific adjustment values. We surveyed the road traffic noise of three apartment complexes, and found that the road traffic noise within each complex was affected at plane level as well as at three-dimensionally. In other words, as the distance from the sound origin grows farther, noise level decreases. Also, it was found that noise increases as heigt goes up, but drops when the height goes beyond a certain level, and that the effect of noise decreases if there are obstacles along the path of the noise direction. Therefore, apartment site design should be done with consideration of the effects of noise in the future.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.345-348
• /
• 2007

People's income level is being ehanced, utilization of a car is increasing. Utilization of a car is increasing by peoples' income level elevation along with growth of economy. Economical loss and environmental pollution by vehicles stagnation of downtown are increasing. Specially, in case of downtown it is trend that the city traveling speed is decreasing every year. Lately, transfer bicycle-user to use public traffic is increasing. And they is using much on leisure because of physical strength improvement and the 5 day work week. In this study, we introduce examples of overseas designing and managing bicycle-user road based on GIS(a target of America and Canada). And we purpose construction-necessity of Bicycle Road Management System(BRMS) using GIS technique in domestic.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1140-1143
• /
• 2007

The purpose of this study is the improvement of the prediction model of highway noise. It includes the measurement and analysis of predicted noise levels by various programs in types of road and environments. The results of the measurement are compared with the noise levels predicted by improved highway noise prediction model and domestic prediction models, (Improved highway noise prediction model was considered ASJ-2003, ISO-9613 part2 and noise power of road surface types at Korean highway road.)