• Culinary science and hospitality research
• /
• v.6 no.1
• /
• pp.253-274
• /
• 2000

This report deals with what the distribution industry is and the actual condition and keynote of the domestic distribution industry. Now, it is difficult compare with the domestic distribution industryand other advanced nation. because of inferior enviroment and given circumstance such as. Open market pressure. We will study about realities and weakness of the domestic distribution industry, also check how to cope with, especially the Government and enterprise, these difficulties for the development of the domestic distribution industry.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.3
• /
• pp.12-17
• /
• 2020

Avionics is a compound word of aviation and electronics that began to be used in the late 1930s. In the components or sub-systems installed to the aircraft, avionics is something that works by electronic technology. In the past, the aircraft mate, the flight engineer, and the radar operators performed the work on board the aircraft but the modern aircraft have replaced these tasks with avionics. the aircraft mechanics who maintain and manage such complex aircraft must have expertise and technics with the development of avionics to maintain aircraft airworthiness. This paper is about the introduction of domestic avionics qualification system and the development of avionics maintenance technology. For this, the SWOT analysis is performed by identifying the internal and external environment. And recommend the strategy and direction of domestic avionics qualification and education system.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.585-588
• /
• 2003

A development scheme for reliable radio-wave Propagation model of digital television (DTV) service, adequate to the domestic environment, is proposed in this paper. Throughout the analysis of several ITU-R recommendations on propagation models in DTV band, ITU-R P.1546, which is based on experimental data, has been selected as our basic model. This model has been programmed, not only to be directly used for engineering analysis, such as frequency assignment, licensing, interference analysis, and sharing frequency bands, but also to be applied for development of a propagation model adequate to the specific environment. Furthermore, the procedure of developing domestic propagation model for DTV service, combined with experimental data which is now being obtained, has been described in this paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.4 no.2
• /
• pp.53-62
• /
• 1998

International Maritime Organizatin(IMO) has been chosen some of agreements for regulating the international stability criteria of fishing vessels and recommended that each goverment adopts theirs into the domestic law. As a result, 77/93 Fishing Safety Agreement was ratified. Among the above agreement, contents of stability was not only applied to domestic law, but also strenghten considerably compared with existing stability criteria. And even if the calculation guide of stability with recommendations was regualted, Analysis of stability on domestic fishing vessels never have been used according to such a caculation method. Moreover, the caculation of stability criteria caused by strong wind, rolling effect and deck inflow was not considered in the existing basic design program. Therefore, the development of stability criteria program available for such a caculation has been of vital impotance. This research has developed a stability criteria program under 77/93 Fishing Safety Agreement. Also through development of stability criteria program, the stability performance of fishing vessel with 69ton stow-nesting was evaluated.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.676-683
• /
• 2008

It is developed in domestic and position Tilting train's Onboard Cabsignal system at the car of the train follows in the route which comes to be applied and application environment and the scope of function and application of equipment is different applied. The development direction of signal equipment at the domestic car must secure the maintenance conservativeness and a fundamental technique of hereafter. It will reach and to respect standardization of technical power it leads and must be applied development or. Consequently, Domestic it is developed tilting it investigates the application scope of the train. It investigates the development direction of signal equipment at the hereafter car. Currently it researches the signal equipment of top of head of a family enemy conditions grudge. Also, It was improved the scope of application function in following and it considered it researched the quality thing and the signal equipment at the car.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.419-423
• /
• 2011

BACKGROUND: Inorganic component is made up largely of salt, because the criteria are difficult to split into domestic and imported ingredients, organic examined the fatty acid composition is to see a possible use as a marker using gas chromatography-mass spectrometry (GC-MS). The 14 domestic samples and 8 imported samples were collected from China, India and other countries were investigated on item of 37 fatty acids. METHODS AND RESULTS: The major components were six species, myristic acid ($C_{14:0}$), palmitic acid ($C_{16:0}$), palmitoleic acid ($C_{16:1}$), stearic acid ($C_{18:0}$), oleic acid ($C_{18:2,n9}$), linoleic acid ($C_{18:2,n6}$) among detected twenty fatty acids including 9 unknowns. The content of palmitic acid were highest as 25.2 to 50.8% of total fatty acids contents. Domestic has seen the most amount of salt in the Taepyeong salts $250.8{\mu}g$/100g, imports $135.2{\mu}g$/100g salt in Chinese Weifang salts showed the lowest content. CONCLUSION(s): The total fatty acid content has seen the most amount of salt in 352.3 ug/100g Christmas island salts showed the lowest content of $164.0{\mu}g$/100g, as a result it is difficult to distinguish the domestic salts and imported by the composition of fatty acid.

• Journal of the Korean Society of Systems Engineering
• /
• v.10 no.1
• /
• pp.1-15
• /
• 2014

Refinery plant producing petroleum products from crude oil has significantly contributed to the creation of the national interests as a leading engineering industries. However, domestic Engineering Procurement Construction (EPC) companies are facing heavy competition for orders. Domestic EPC companies as EPC contractors are faced with some problems such as undertaking responsibility for FEED packages produced by other FEED companies. But domestic EPC contractors are unfamiliar to development and validation of FEED packages. It causes poor profitability and lower competitiveness of domestic companies. It is necessary for domestic companies to have capability to perform FEED activities in order to overcome these limitations instead of focusing on EPC phase after FEED phase. The systematic procedure is needed to perform the FEED activities, however, there are present difficulties on it due to the lack of experience in FEED packages development which require various engineering knowledge of chemical process, mechanics, electrics, instrumentation, civil engineering. This study has applied systems engineering method which is multi-disciplinary approach to derive and verify the solution to meet the customer's needs when the complex system is developed to task execution process development of FEED activities for refinery plant. The problems that may occur in the future were identified in advance by taking into account the various stakeholders and system context through the application of systems engineering. It helps to develop the task execution process systematically. The developed task execution process of FEED activities is planned to make effectiveness verified by engineering professionals experienced in FEED and continually enhance this process by field application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1384-1389
• /
• 2020

Although the fintech industry is developing rapidly around the world, the domestic development situation is rather slow compared to the speed. Therefore, the future development direction can be set by analyzing the current status of the fintech industry in order to suggest the direction of development in the domestic fintech industry. The main services provided by companies belonging to the domestic fintech industry are in the areas of remittance settlement, financial investment, asset management, crowdfunding, P2P finance, overseas remittance, fintech SI, insurtech, virtual currency, security, and authentication. It is divided into. This study identifies the main technologies used in the service and grasps the current domestic status. In addition, it analyzes the distribution of workers by each service. This study is expected to play an important role in the development of the financial industry through technical analysis of fintech companies.

• Journal of Fashion Business
• /
• v.26 no.2
• /
• pp.28-47
• /
• 2022

Rapid development of information and communication technology is leading the digital transformation (hereinafter, DT) of various industries. At this point in rapid online transition, fashion manufacturers operating offline-oriented businesses have become highly interested in DT and artificial intelligence (hereinafter AI), which leads DT. The purpose of this study is to examine the development status and application case of AI-based digital technology developed for the fashion industry, and to examine the DT stage and AI application status of domestic fashion manufacturers. Hence, in-depth interviews were conducted with five domestic IT companies developing AI technology for the fashion industry and six domestic fashion manufacturers applying AI technology. After analyzing interviews, study results were as follows: The seven major AI technologies leading the DT of the fashion industry were fashion image recognition, trend analysis, prediction & visualization, automated fashion design generation, demand forecast & optimizing inventory, optimizing logistics, curation, and ad-tech. It was found that domestic fashion manufacturers were striving for innovative changes through DT although the DT stage varied from company to company. This study is of academic significance as it organized technologies specialized in fashion business by analyzing AI-based digitization element technologies that lead DT in the fashion industry. It is also expected to serve as basic study when DT and AI technology development are applied to the fashion field so that traditional domestic fashion manufacturers showing low growth can rise again.

• Journal of KIBIM
• /
• v.13 no.4
• /
• pp.1-12
• /
• 2023

In Korea, there are many attempts to automate architectural design tasks, focusing on government-led national R&D projects and private operators, in order to enhance global competitiveness and productivity of the building service industry. However, according to a survey of architectural design office practitioners, only 25% (9 out of 37) have used it, suggesting that there are fewer cases of practical use in the field compared to research and investment in automation technology development, and there are discrepancies between automation and technology development items required in the field. In this study, the priority of automation of planning and design work of architectural design office practitioners is derived, and a comparative analysis is conducted with domestic architectural design automation service items based on the priority. A survey was conducted on practitioners of domestic architectural design offices to derive automation priorities for 19 items of architectural planning and design work. Based on the derived priorities, the degree of reflection of the working-level automation needs of domestic services was confirmed by comparing them with the domestic architectural planning and design automation service items. As a result, it was confirmed that domestic architectural planning and design automation services did not properly reflect the priority of planning and design work automation of architectural design office practitioners. This suggests that it is necessary to reflect the priorities derived in this study in technology development in order to increase the cases of practical use of the automation technology in the working environment and improve the productivity of service.