• 한국항공우주학회지
• /
• 제37권5호
• /
• pp.502-510
• /
• 2009

레이저 관성항법장치는 링 레이저 자이로와 가속도계로 구성되어 있다. 링 레이저 자이로는 링 레이저 자이로 내부의 레이저 공진기에 장착된 반사경의 후방산란으로 인하여 0.1deg/sec 이하의 각속도가 측정되지 않는 lock-in 영역이 존재하기 때문에 이를 제거하기 위해서 Dither 운동이라는 정현파 각속도 운동을 몸체에 가한다. 이러한 Dither 운동은 레이저 관성항법장치가 정상동작하는 경우 항상 RLG/가속도계 측정치에 포함되어 나타난다. 이러한 레이저 관성항법장치의 특징을 이용하여 본 논문에서는 RLG/가속도계 측정치를 실시간으로 FFT를 수행하여 Dither 운동이 측정치에 포함되어 있는 가를 실시간으로 감시하여 레이저 관성항법장치의 고장을 검출하는 방법을 제안하였으며 정지상태 시험 및 차량탑재 시험을 통해 유용성을 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1068-1073
• /
• 2005

Development of a locomotive mechanism for the capsule type endoscopes will largely enhance the ability to diagnose disease of digestive organs. In connection with it, most of the researches have focused on an installable locomotive mechanism in the capsule. In this paper, it is introduced that the movement of a capsule type endoscope in digestive organ can be manipulated by magnetic force produced outside human body. Since the magnetic force is provided by permanent magnets, no additional power supply to the capsule is required. Using a robotic manipulator for locating the external magnet, the capsule motion control system can cover the whole human digestive organs. This study is particularly concentrated on dither motion effect to improve the mobility of capsule type endoscope. It was experimentally found out that the friction coefficient between the capsule and digestive organ can be remarkably reduced by superposing yawing or rolling dither motion on the translatory motion. In this paper, the experimental results obtained while the direction, amplitude and frequency of sinusoidal dither motion were changed are reported.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.65-74
• /
• 2005

공진기 진동형 링레이저 자이로가 외부에서 입력되는 각도변화만을 검출하여 출력하기 위해서는 링레이저 출력으로부터 공진기의 각진동 운동에 의한 출력을 제거하는 방법이 필요하다. 본 논문에서는 공진기 진동형 링레이저 자이로에서 공진기의 각진동을 검출하는 각속도 센서 출력을 V-F 변환하여 링레이저 출력을 보상하는 dither-stripping에 대하여 논의하였다. 우리는 V-F 신호의 offset을 제거하기 위하여 V-F 신호의 미분값을 취하고 또한 미분값을 취함으로서 변화되는 위상을 보상하기 위하여 아날로그 적분기로 위상을 보정하는 방법과 링레이저 신호 또는 V-F 신호의 검출 시점을 지연시키는 방법을 개발하였다. 그리고 링레이저 출력과 V-F 신호 사이의 환산을 위하여 분산을 이용하여 이득을 산출하는 방법을 개발하였다. 우리는 이와 같은 방법을 적용하고, dither trapping 방법과 비교하는 실험을 통하여 효과를 분석하였다.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.57-63
• /
• 2005

Development of a locomotive mechanism fer the capsule type endoscopes will largely enhance the ability to diagnose disease of digestive organs. In connection with it, most of researches have focused on an installable locomotive mechanism in the capsule. In this paper, it is introduced that the movement of a capsule type endoscope in digestive organ can be manipulated by magnetic force produced outside human body. Since the magnetic force is provided by permanent magnets, no additional power supply to the capsule is required. Using a robotic manipulator for locating the external magnet, the capsule motion control system can cover the whole human digestive organs. This study is particularly concentrated on dither motion effect to improve the mobility of capsule type endoscope. It was experimentally found out that the friction coefficient between the capsule and digestive organ can be remarkably reduced by superposing yawing or rolling dither motion on the translatory motion. In this paper, the experimental results obtained with the direction, amplitude and frequency of sinusoidal dither motion changed is reported.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.622-635
• /
• 2009

Laser Inertial Navigation System(LINS) consists of Ring Laser Gyroscopes(RLG) and accelerometers. RLG has a lock-in region in which there is zero output for input angular rates less than about 0.1deg/sec. The lock-in region is generated by the imperfect mirrors in RLG. To avoid the lock-in region, a sinusoidal motion called dither motion is applied on RLG. Therefore this dither motion is measured by RLG/accelerometer even if at a stop state. In this situation, the performance on the initial alignment of LINS can be degraded. In this paper, we analyze the performance on the initial alignment of LINS theoretically and experimentally. Analysis results include how dither motion, the pre-filter and the corner frequency in alignment loop affects the performance on the initial alignment of LINS.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.531-536
• /
• 2014

There are trapping and stripping methods as the technique to remove the dither motion from RLG(Ring Laser Gyro) output. V/F converter output of angular sensor to measure the dither motion is used in stripping method. But bias and scale factor error is always included in V/F converter output and is a critical limiting factor for the wide application of stripping method to RLG. Therefore there have been many researches to solve this problem. The method to accurately estimate the bias and scale factor error of V/F converter using measurements of the angular sensor acquired at data sampling rate of INS is presented in this paper. To this end, stripping technique based on model of dither motion is newly applied.

• 한국군사과학기술학회지
• /
• 제24권6호
• /
• pp.577-590
• /
• 2021

In this paper, we theoretically analyzed the self-alignment/navigation performance in the accelerometer resonance state generated by dither motion of ring laser gyroscope in LINS and verified it through simulation. As a result of analysis, it is confirmed that the amplitude of the accelerometer measurement amplified in the accelerometer resonance state is decreased in the process of sampling per the navigation calculation period and that frequency is changed by the aliasing effect too. It was also analysed that the attitude error in self-alignment is determined by the amplitude/frequency of the accelerometer measurement, the gain of the self-alignment loop, and the velocity and position error in the navigation is determined by the amplitude/frequency/phase error of the accelerometer measurement. This analysis and simulation results show that the self-alignment and navigation performance is not be degraded only when the amplification factor of the accelerometer measurement in the accelerometer resonance state is 3 or less

• 제어로봇시스템학회논문지
• /
• 제7권8호
• /
• pp.697-702
• /
• 2001

The ring laser gyro(RLG) has been used extensively in strapdown inertial navigation system(SDINS) because of the apparent of having wide dynamic range, digital output and high accuracy. The dithered RLG system has dynamic motion at sensor level, caused by the dithering motion to overcome the lock-in threshold. In this case, an attitude error is produced by not only the true coning of the vehicle motion but also the pseudo coning of the sensor motion. This paper describes the definition of the multi-frequency coning motion and its noncommutativity error to reject the pseudo coning error produced by the sensor motion such as the dithered RLG. The simulation results are presented to minimize the multi-frequency coning error.