• KIEAE Journal
• /
• v.13 no.5
• /
• pp.103-110
• /
• 2013

This study aims to calculate the $CO_2$ emissions by the properties of construction waste to establish a LCI DB of construction waste generated at the disuse stage. The $CO_2$ emissions from apartment houses was calculated by calculating the energy consumptions by treatment steps to calculate the $CO_2$ emissions by the treatment steps of construction waste. As a result of analyzing the $CO_2$ emissions from a total of 27 complexes, maximum 46,791g-$CO_2/m^2$, minimum 34,893g-$CO_2/m^2$ and average 38,713g-$CO_2/m^2$ were generated, and were varied by the quantity of construction waste in general, but were affected by the transportation distance in case of transportation steps as well. As a result of analyzing the $CO_2$ emissions by the properties of construction waste, average 19,815.50g-$CO_2/m^2$ was generated, the highest, from the example complex at the demolition stage in case of construction wastes, and 1.72g-$CO_2/m^2$ was generated, the lowest, during reclamation. In case of combustible waste, average 11,495.63g-$CO_2/m^2$ was generated, the highest, from the example complex during incineration of wastes, and 21.48g-$CO_2/m^2$ was generated, the lowest, at the waste transportation stage. In case of noncombustible waste, average 522.43g-$CO_2/m^2$ was generated, the highest, from the example complex at the demolition stage, and 1.07g-$CO_2/m^2$ was generated, the lowest, at the transportation stage. In case of other construction wastes, average 645.42g-$CO_2/m^2$ was generated, the highest, from the example complex at the demolition stage, and 47.38g-$CO_2/m^2$ was generated, the lowest, at the middle treatment stage.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.26-36
• /
• 2014

The materials flow of copper can be analyzed into up-stream and down-stream stages based on the literature survey. Discharge and recycling stages in the down-stream have been particularly analyzed through the field survey. The waste nickel resources circulation flow may conveniently be grouped into 4 stages discharge import, collection disuse, resource recovery and product production export, the resources mainly consist of copper scrap and stainless steel scrap in 2010. The resource circulation rate of 36.83% is obtained from the above flow. Various plans are therefore, suggested in each stage to increase resource circulation rate. At discharge import stage, it is suggested to consider this kind of waste as an important resources if it is appropriately classified in detail, basides applying quota tariff to this kind of waste. At collection disuse stage, the plan of stabilizing supply and demand is suggested through the improvement of bidding system. Resources professional cycling stage crushing and grinding companies foster coexistence between large and small plans and strategies were suggested. At product production export stage, the integrated approval is suggested approval for licensing to register units as waste-treating facilities instead of exempting registration under the present condition to activate recycling industries.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.9
• /
• pp.931-937
• /
• 2012

In this study, we assessed environmental impacts of compound humidifiers using environmental life cycle assessment and presented the ways to improvements in energy consumption of them. We found eco-design parameters and $CO_2$-eq emissions in each stage of raw material acquisition, manufacturing, transportation, use and disuse in life cycle of the compound humidifiers. The highest $CO_2$ emission is found to be in the stage of use among all stages of life cycle, which is mainly due to power consumption in thermal heating of heating coil for sterilization during humidification. The power consumption and $CO_2$ emission in the stage of use can be reduced to 1/4 and 1/3 at the highest estimate through improvement of sterilization method, respectively. We suggested the replacement of conventional thermal heating coil by ultra violet light-emitting diodes (UV-LED) for sterilization and then presented the experimental results on the sterilization effects of UV-LEDs.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2278-2282
• /
• 2010

The regulation involved with railway vehicles is defined by law to protect customer and fundamental safety. The persisting period of domestic railway vehicles in general are 25~30years. Expired railway vehicles are disused in various way. The railway vehicles are consists of recyclable various materials, but there is no standardization or calculating method related with railway vehicles to make disuse scenario. In this study, performed to get a recycling ratio about major materials of domestic subway railway vehicles using ISO 22628 which is Road vehicles-Recyclability and recoverrability method. This research provide foundation for further researches, standardization of EoL stage and recycling railway vehicle.

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.4
• /
• pp.117-124
• /
• 2012

Recent years, many industries acknowledge that environmental substantiality of products must be an essential role and it is one of the major importances for industries to consider the environmental impacts of products at the early stages of product development. This study investigated eco-design parameters and $CO_2-eq$. emissions in each stage of raw material acquisition, manufacturing, transportation, use and disuse in life cycle of touch monitor stand based on Eco-Design. In this study, to fulfill of Eco-Design, the environmental impact assessment of through LCA(Life cycle assessment) was carried out with benchmarking monitor stand and we suggested the direction of new design of touch monitor stand mechanism based on eco-friendly considerations. New design based on LCT(Life Cycle Thinking) showed that the following eco-friendly considerations at the early stage of design to be helpful to reduce GWP(Global Warming Potential) [kg $CO_2-eq$.] in new monitor stand development and it is necessary for Eco-Design process of the product.

• Korean Journal of Veterinary Research
• /
• v.56 no.2
• /
• pp.117-120
• /
• 2016

Experimental autoimmune encephalomyelitis (EAE) in Lewis rats is characterized by transient paralysis followed by recovery. To evaluate whether transient paralysis in EAE affects bone density, tibiae of EAE rats were morphologically investigated using micro-computed tomography and histology. The parameters of bone health were significantly reduced at the peak stage of EAE rats relative to those of controls (p < 0.05). The reduction of bone density was found to remain unchanged, even in the recovery stage. Collectively, the present data suggest that osteoporosis occurs in paralytic rats with monophasic EAE, possibly through the disuse of hindlimbs and/or autoimmune inflammation.

• Journal of Korean Society of Archives and Records Management
• /
• v.12 no.3
• /
• pp.71-92
• /
• 2012

As records managers are assigned in accordance with act on public records management, the record management has settled down a bit, and also much effort is put to perform the record management in accordance with law. The record management includes all the works like production, classification, organization, transfer, collection, evaluation, disuse, preservation, opening to the public and application. Among them, the record transfer is an important work that performs the initial stage in which the main agent of management is changed from administration department to record center. Thus this study suggested the improvement measures for non-electronic record transfer after examining the current transfer state of 16 local governments in Busan region and also problems occurring in the process of transfer through interviews with institutional records managers.