• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.2923-2936
• /
• 2024

Modern risk management philosophy emphasizes the invulnerability of human beings to cope with all kinds of emergencies. The Nuclear Accidents Emergency Response Organization (NAERO) of Nuclear Power Plant (NPP) is the primary body responsible for nuclear accidents emergency response. The invulnerability of the organization to disturbance or attack from internal and external sources is crucial in the completion of its response missions, reduction of severity of accidents, and assurance of public and environmental safety. This paper focused on the NAERO of a certain NPP in China, and applied the complex network theory to construct the network model of the organization. The topological characteristics of the network were analyzed. Four importance evaluation indexes of network nodes including Degree Centrality (DC), Betweeness Centrality (BC), Closeness Centrality (CC) and Eigenvector Centrality (EC), along with Pearson coefficient correlation among the indexes were calculated and analyzed. Size of the Largest Connected Component (LCC) and Network Efficiency were used as measures regarding the invulnerability of the network. Simulation experiments were conducted to assess the invulnerability of network against various attack strategies. These experiments were conducted both in the absence of node protection measures and under protection measures with different node protection rates. This study evaluated the invulnerability of the NAERO network, and provided significant decision-making basis for the enhancement of the network's invulnerability.

• Journal of Korea Foresty Energy
• /
• v.22 no.3
• /
• pp.1-10
• /
• 2003

The successional status and potential natural vegetation were examined in the natural deciduous forest in Mt. Chombong area. The examination was based on the subsequent process of generation replacement by understory saplings for the dominant canopy trees within 106 20mx20m square sample plots. The transition matrix model, which was modified from mathematical theory of Markov chain, was employed to analyze the successional status of the study forest. The model suggests that study forest is still seral, and it is considered to be more than 500 years away from the steady state or climax in terms of species composition. The simulations predict a remarkable decrease in the proportion of species composition of the present dominant Quercus mongolica and Kalopanax pictus from current 42.6% and 8.1% to less than 13.3% and 0.5%, respectively, at the steady state. On the contrary, the proportions of Abies holophylla, Acer mono, Fraxinus mandshurica, Tilia amurensis, and Acer pseudo-sieboldianum will increase at the steady state. The change of predicted composition ratio was generally coincide with the result of tolerance index to be compared with the study model. The hypothesis and sensitivity of the model were also discussed to evaluate the applicability to the real situation. The overall results indicated that the present dynamics of the forest must reflect the seral state due to previous disturbance mainly by human related interference.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.589-598
• /
• 2019

This study was conducted to build a structural equation model explaining factors that affect hemodialysis patients' quality of life to test the goodness of fit of the model and identify directly and indirectly significant paths. To accomplish this, 230 patients receiving hemodialysis registered at study hospitals in G Metropolitan City and M City were randomly selected, and 201 were used in the final analysis. Data were collected using a self reporting questionnaire from February 1 to March 31, 2014. SPSS WIN 18.0 was used for descriptive statistics and correlation analysis of the general characteristics and for reliability analysis of the research tools. In addition, AMOS 18.0 was used for confirmatory factor analysis of latent variables, to determine the goodness of fit of the hypothetic model, and hypotheses testing. The results of this study were as follows: the fit of the modified model was 41.32, GFI = .96, AGFI = .92, RMR = .04, NFI = .96, CFI = .91 and TLI = .95. Twelve out of the 22 research hypotheses that were improved and improved were statistically significant. The results indicated that hemodialysis patients' quality of life was influenced directly by self-efficacy, depression, and self-care behavior, and indirectly by sleep disturbance, stress, fatigue, and family support. These variables explained 58.6% of the variation in quality of life. Overall, these findings suggest that nursing interventions for hemodialysis patients require strategies for managing patient depression and for increasing self-efficacy and self-care behavior to improve quality of life.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.1
• /
• pp.54-62
• /
• 1995

This paper is a study on a speed control of an induction motor used the MRA-DSM(Mode1 Reference Adaptive-Discrete Sliding Mode) controller. In this paper, when controls motor speed, DSM algorithm is proposed for having Robustness against disturbance and parameter variation. and it is also proposed MRA-DSM including the additional load model reference algorithm, which can be compensated the discontinuous control imputs at sliding mode and followed the model Preference independent of parameter variation of control subjects. The control system is composed of the parallel processing control system using the microprocessor for maximizing the performance of control systems and the real time processing. Also it simplifies the hardware composed of controlling the system by software and improves the reliability of the system. And while MRA-DSM control, faster response characteristics of 27.2 % is obtained than DSM control.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.851-856
• /
• 2013

Recently, as the tactical environment has changedto one of network-centric warfare, where all components are connected through a network, much emphasis has been placed on the use of an artificial satellite for achieving high communication speeds. To provide a high-quality artificial satellite link, stabilization is very important in a platform. Previous stabilization control techniques used PI control, which is commonly used for vessels. However, for ground terminals that require a higher communication speed, the antenna should move faster to track an artificial satellite within a short period of time. Moreover, the terminals must be equipped with proper sensors and algorithms so that they can detect and compensate for external disturbances while tracking the artificial satellite. In this study, through the analysis of the dynamic model of an antenna system, a stabilization algorithm for ground terminals was proposed;this algorithm shows high isolation performance in the low-frequency range and includes $PI^2$ control.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.673-679
• /
• 2015

In this study, the nondominated sorting genetic algorithm (NSGA-II) is used to obtain the optimized proportional-integral-derivative (PID) gain value that can quickly recover the motion of a quadcopter after a disturbance. Prior to PID control, the four-rotor quadcopter interval was defined using computational fluid dynamics (CFD). Through the definition of this model, the PID control algorithm was generated. To construct a response surface model, D-optimal programming was used for the generation of experimental points. For this purpose, a gain value that satisfies both the roll and altitude PID gain values is obtained. Using the NSGA-II, the gain value of shorten time of the quadcopter motion control can be optimized.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.5
• /
• pp.45-58
• /
• 2020

This study was conducted to comprehend the spatial distribution characteristics, habitats and appearances of Hydropotes inermis by using the biotope mapping in Daebudo Island, Ansan-si. The result is base data to understand status and manage potential inhabitation of Hydropotes inermis in Daebudo Island through the Maximum Entropy model. The study used 105 traces from the primary investigation and 452 traces in the secondary investigation. The biotope types were distinquished Hydropotes inermis habitats largest from the order of natural forest (15.1%), natural coast (13.7%), marshy cultivated land (12.6%), and dry cultivated land (11.7%), and from the inhabitation trace results. Hydropotes inermis appearanced biotope types were the greatest in the order of cultivated land (49.73%) > forest (18.85%) > coast (7.00%) > grassland (6.28%). Since forests in Daebudo Island have low slope and altitude, it was concluded that Hydropotes inermis would live in most of the forests. A high number of Hydropotes inermis was found to appear in areas where the grassland is formed including cultivated lands (include unused paddies and fields) and marshy grasslands, which would result in direct damage of crops. According to the Maxent modeling analysis that used location information of Hydropotes inermis, the AUC value was 0.635 based on the ROC curve. In Daebudo Island, areas with over 0.635 potential inhabitation value are distributed all over the place, and it was concluded that each population would have a different scope of influence and home range. Hydropotes inermis living in Daebudo Island have high habitat suitability mainly around the cultivated lands near the roads, but due to the bare lands and roads, it is expected that their habitats would be fragmented and damaged, which would have a direct and indirect effect in maintaining the Hydropotes inermis population. Also, considering habitat disturbance, diverse methods for reducing damage including capturing some individuals within the limit that does not disperse Hydropotes inermis population in Daebudo Island must be carried out.

• Structural Engineering and Mechanics
• /
• v.65 no.5
• /
• pp.547-556
• /
• 2018

Based on the shaking table tests of a 1:3.52 scale one-bay and one-story ancient wooden structure, a simplified structural mechanics model was established, and the structural state equation and observation equation were deduced. Under the action of seismic waves, the damage rule of initial stiffness and yield stiffness of the joint was obtained. The force hammer percussion test and finite element calculations were carried out, and the structural response was obtained. Considering the 5% noise disturbance in the laboratory environment, the stiffness parameters of the mortise-tenon joint were identified by the partial least squares of singular value decomposition (PLS-SVD) and the Extended Kalman filter (EKF) method. The results show that dynamic and static cohesion method, PLS-SVD, and EKF method can be used to identify the damage degree of structures, and the stiffness of the mortise-tenon joints under strong earthquakes is reduced step by step. Using the proposed model, the identified error of the initial stiffness is about 0.58%-1.28%, and the error of the yield stiffness is about 0.44%-1.21%. This method has high accuracy and good applicability for identifying the initial stiffness and yield stiffness of the joints. The identification method and research results can provide a reference for monitoring and evaluating actual engineering structures.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.6
• /
• pp.71-79
• /
• 2008

The underground conduit laid under different environments exhibits various behaviour according to the ground and external load as well as the loading time and conditions, so on. As the environmental conditions are usually different even within the same area, it is very difficult to correctly predict the stress conditions and behaviour of the underground conduit using currently available theoretical analysis. Especially, it is not yet satisfied in Korea for the evaluation of the underground conduit under the influence of the load of vehicles or unexpected loading conditions. Thus, in this study the assessment for the excavation depth and ground disturbance was carried out with a large box model test and numerical analysis. Numerical analysis was also performed for the assessment of dynamic loading conditions like railway load.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.511-519
• /
• 2013

Switching controllers for active magnetic bearings are claimed to minimize the copper losses because they do not use bias currents. In this study, we compare the performances of the switching controller with those of the widely used proportional-derivative (PD) controller. The PD controller is combined with a synchronous notch filter to reduce the effect of the unbalance disturbance. For a fair and objective comparison, the PD controller is designed systematically. The switching controller is designed so that the dynamics of the two controllers are almost identical. A system model is developed. This model includes the flexible modes of the rotor and the dynamics of the sensors and amplifiers. The simulation results show that the switching controller indeed reduces the copper loss at lower speeds. However, it fails to operate around the speed close to the bending mode of the rotor.