• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.5
• /
• pp.347-353
• /
• 2003

A nonlinear speed controller for a surface mounted permanent magnet synchronous motor (PMSM) based on a newly developed adaptive backstepping approach is presented To compensate parameter uncertainties and load torque disturbance, a nonlinear adaptive backstepping control law and adaptive law are derived systematically through virtual control input and suitable Lyapunov function. Also, speed observer without using costly speed sensor is presented. Simulation results show that the proposed controller can observe the speed and track the reference speed signal generated by a reference model.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2291-2294
• /
• 2003

In this paper, analysis and control design of ac-dc converter, normally nonlinear time-varying system, using sliding mode controller to achieve fast output voltage response, disturbance rejection and robust system in the presence of load variation are demonstrated. The objective of this method is to develop methodology for output voltage to be constant and input current sinusoidal that results in nearly unity power factor, respectively. In addition the converter can be also bidirectional power flow. Simulation results using Matlab/Simulink show the effectiveness of sliding mode control system compared with linear feedback controller to guarantee enhanced PF>0.98, THD<5%, and ripple output voltage is less than 1% at the maximum output power.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.366-369
• /
• 1991

A nonlinear controller based on feedback linearization method is proposed for an electromagnetic suspension system. After exactly linearizing the system with nonlinear feedback, linear control technique is applied. Modeling of stagger typed magnet is introduced and controlled for not only levitation, but guidance. By the feedback linearization, the nonlinear, MIMO system is linearized and decoupled, so we can use linear control law. The simulation of this system control skim is demonstrated. Robustness properties of the proposed controller with respect to the load variations and external disturbance is also analyzed for a multi input multi output system. In this properties, the boundary of variation is proposed.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.915-918
• /
• 2000

In this paper, we propose an efficient feature vector extraction and decision fusion methods for the automatic classification of power system disturbances. Here, FFT and WPT(wavelet packet transform) are und to extract an appropriate feature for classifying power quality disturbances with variable properties. In particular, the WPT can be utilized to develop an adaptable feature extraction algorithm using best basis selection. Furthermore. the extracted feature vectors are applied as input to the decision fusion system which combines the decisions of several classifiers having complementary performances, leading to improvement of the classification performance. Finally, the applicability of the proposed approach is demonstrated using some simulations results obtained by analyzing power quality disturbances data generated by using Matlab.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.562-568
• /
• 1998

During the past three decades, several techniques have been suggested for robust performance design of multivariable systems within the framework of Quantitative Feedback Theory. They are all characterized and limited by the use of loop transmission inversion. A new approach within framework is described which leads to a design tehnique without loop transmission inversion. Complete sequential design algorithms are derived for performance specifications in terms of plant input disturbance, sensitivity, complimentary sensitivity and control effort.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.922-930
• /
• 1999

This paper describes a new 14-CPU real-time distributed automatic gauge control (AGC) system for POSCO's No. 2 Hot Strip Mill at Pohang Works. The new AGC system has adopted gaugemeter AGC, Monitor AGC, and roll gap disturbance compensators. The computer system for the new AGC system has been developed based on VMEbus computer systems and a commercial real-time operating system. A VMEbus computer system is also used for the position servo control of hydraulic cylinders. All the application programs and input/output signals have been reasonably distributed over the control computer systems for the maximum reliability and effectiveness of the system. The new AGC system has been successfully used for the No. 2 Hot Strip Mill.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1129-1133
• /
• 2007

Assessment of noise exposed population is a method for checking the degree of environmental noise and social influence in order to reduce the risks such as annoyance and disturbance that are generated by environmental noise. Also, this method suggests the preferential noise reduction policy and action plan by accurately assessing the area that noise causes harm to human health. Recently, a noise map, which can predict noise in comprehensive areas, is used for the assessment of noise exposed population, breaking from the methods using existing measures. In particular, countermeasure for the noise can be considered more effectively by using assessment methods of noise exposed population for specific noise levels, areas, and building types which are the main input factors in noise maps. In this study, Assessment methods of noise exposed population by using 2D noise map are compared with those by 3D noise map.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.35-42
• /
• 2004

The control systems with friction cause the steady state error and slow response, because friction is a sensitive to the change of system condition and has highly nonlinear characteristics. To overcome these problems and do precise position control for a ball-screw system, we use Coulomb friction estimator and the sliding mode control(SMC) to compensate its negative effect. The applied SMC for tracking position has a characteristics of robust stability and reducing chattering, and is derived from the Lyapunov stability theorem and reaching condition. Compensating the estimated friction torque to the bounded disturbance term of the SMC's equivalent control input, it has a tracking performance better than the PID from the experimental results.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.699-702
• /
• 1991

A servo system requires faster and more accurate dynamic responses. Generally a PD control is mainly used to obtain the precision, and in the other hand a fuzzy control to improve the transient response and to cope with the nonlinearity of systems. Recently hybrid control, which is attempted to combine the advantages of PD control and a Fuzzy control was proposed, but this technique requires complicate design procedures. Therefore in this paper, a Fuzzy controller with a series of membership functions, and various sampling periods and rules, was designed on the basis of Lyapunov stability theory and auto tuning methods of input scale factors. And also it was showed to have the excellent adaptive performances against internal-external disturbances and the usefulness of this controller from the results of simulations.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1097-1098
• /
• 2011

This paper proposes high performance control of induction motor drive using fuzzy neural network precompensation PI(FNPPI) controller. To apply industrial processes, control methods is requested technique that can be demonstrate high performance and robust about load disturbance, parameter variation and uncertainty of model, etc. The PI controller dose not show satisfactory performance due to fixed gain. Therefore, this paper proposes FNPPI which is adjusted input values of PI controller according to operating conditions of motor by FNN controller mixed neural network and fuzzy. And this paper proves validity of proposed control algorithm through result analysis.